Car Audio Amp For Sale in Sugar Land, TX
When you are looking Car Audio Amp For Sale in Sugar Land, TX, you should consider Thunder Eletronics. One of the reasons hundreds of car audio enthusiasts visit our site every week looking for things like car stereo on sale is not because we are the most popular but because DIY car stereo enthusiast knowt that ThunderEletronics.Net has a wide selection of car audio and eletrconics plus fast shipping.
Whether you are searching for Car Audio Amp For Sale Sugar Land, TX or Car Audio Amplifier Monoblock we are sure you will find our inventory suitable. That is because we put a lot of time and effort selecting the products we offer so that you have the easiest car stereo installation experience and top rated car stereo system you will be happy with and your friends will envi. So, tell all your friends for Car Audio Amp For Sale in Sugar Land, TX take a look at ThunderEletronics.Net for great prices and best selling for Car Audio Amp For Sale in Sugar Land, TX or Car Audio Capacitor we’re sure you’ll satisfied with the options at ThunderElectronics.Net. For the best selection on car audio component speakers and fast expedited shipping, and misleading advertising you can count on ThunderElectronics.Net!
Best Selling Car Audio Amp For Sale Near Sugar Land, TX
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 4 Channel, strong power dynamic voice restores high degree of sound.
- Aluminium alloy drawing process, slim design, easy to install.
- Great heat dissipation performance, safe and stable.
- Energetic, strong power, easy to promote sub woofer. Nondestructive amplifier installation, 360°round sound.
- HIGH-PERFORMANCE POWER OUTPUT: Delivers 400 Watts RMS across 4 channels, powering deep bass and clear highs. Perfect for car or motorcycle audio setups, this compact amplifier enhances sound quality and...
- COMPACT & SLEEK DESIGN: Allows easy installation in tight spaces without sacrificing performance. This mini amplifier ensures high-efficiency sound delivery while maintaining a stylish, compact profile.
- ADVANCED CLASS D TECHNOLOGY: The 4-channel amplifier minimizes distortion and maximizes efficiency. It delivers clear powerful audio, optimizing signal quality while keeping heat to a minimum, ensuring...
- VERSATILE CONNECTIVITY & CONTROL: Features RCA inputs and crossover settings, offering precise control for speakers and subwoofers. Supports full-range sound and bridged connections, making it adaptable...
- The Taramps TS line has Multichannel amplifiers, being Full Range amplifiers with 4 channels, and are also amplifiers with high power and cost-benefit
- The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with LED indicator and short-circuit protection
- The Positive/Negative Power Cable is 11 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 20A
- 6 Channel 7-Band High Performance Car Audio 1/2 DIN Pre-Amp Electronic Equalizer
- Featuring 2 (Balanced & Selectable) RCA Inputs - Main and Auxiliary (Aux w/ Variable Gain Control) | THD: 0. 005%
- High Voltage (Max Output Voltage - 7V) Gold Plated Pre-Amp RCA Outputs - Front, Rear, and Subwoofer (with Variable Subwoofer Level Control on Front of EQ)
- 7 Fully Adjustable -12 dB to +12 dB EQ Bands (50 Hz, 125 Hz, 320 Hz, 750 Hz, 2. 2 kHz, 6 kHz, 16 kHz) with Built-in Fader Control
- 4-Channel Amplifier
- 55 watts RMS x 4 at 4 ohms
- 80 watts RMS x 4 at 2 ohms
- 160 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CTA-2006 compliant
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 4 channels x 375 watts @ 2 ohms
- 4 channels x 185 watts @ 4 ohms
- 2 channels x 750 watts (mono bridged) @ 4 ohms
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- HIGH PERFORMANCE - DS18’s SXE series of amps was designed for users looking for an extreme increase to the quality of music reproduced by their vehicle. The SXE-1200.4 guarantees your sound system’s...
- VARIABLE CROSSOVER - The SXE series of amplifier gives users the ability to tailor the audio reproduced by their vehicle to their personal listening preferences through the use of it’s fully variable...
- PERFECT SIZE - As a Class A/B amplifier, the SXE series uses power transformers significantly smaller than your average amplifier, making it the perfect size for any vehicle’s custom build: but, what it...
- SUPERCHARGE - The SXE-1200.4 has a power output of 200W x 2 CH bridged at 4-ohms, 100W x 4 CH at 2-ohms, 60W x 4 CH at 4-ohms: perfect power settings to supercharge any custom build
- - Power LED indicator (red), L / R speaker and B+ power DC jack on left side.
- - USB charging port, L / R RCA input jack, low / off / pass filter switch and volume knob on right side.
- - Matched with power cable and audio output cable.
- - Lightweight aluminum casing.
- Space Saver - If you are tight on space, this is a great solution for you. The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design,...
- Pulse Width Modulated - PWM simplifies power supplies. It controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback...
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of...
- High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the SLIM10 to your factory radio or an aftermarket radio that does not have low-level...
- Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Specs - Dimensions: 17” x 10.31” x 2.25”, Weight: 12.53 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 103 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 40 Amp...
- 1000W Mono Car Audio High Power Amplifier Amp Board.
- Strong heat dissipation power drawing technology is compact.
- High efficiency, wide frequency, high tone quality.
- 12V 1000W car audio amplifier board provide a wonderful in-car entertainment.
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use...
- ⏸400W+400W Hifi Stereo AMP▶ AK-380 audio power amplifier, simple compact but practical and powerful, offer 400W+400W peak power and 40W+40W rated power, advanced circuitry design, built-in bluetooth...
- ⏸Multifunctional Amplifier Receiver ▶This 2 channel Bluetooth 5.0 mini audio amplifier with LCD display backlight and volume, treble and bass control knobs, which allows you to adjust the high and low...
- ⏸Wide Application▶Mini bluetooth audio amplifier widly compatible with mobile phones, computers, tablets, notebooks, MP3, MP4,TVs and projectors with AV audio etc. you can use it at home, and carry it...
- ⏸Easy to Use▶Little audio amplifier compatible with two 40W rated power, 4-16Ω speakers. Power plifier with remote control for distant audio adjustments, can read U-disk and memory card, plug and...
Last update on 2024-12-12 / Images Source Amazon Product API
Post Related to Car Audio Amp For Sale in Sugar Land, TX.
Is Jensen a Good Car Audio Brand
The right automotive audio equipment is crucial for a pleasurable driving experience, whether commuting to work or on a road trip. Jensen may [...]
Is Soundstage & Imaging in a Vehicle Possible?
Although not easy, the answer to that is a resounding YES! I personally have owned several car stereo systems that rival [...]
Beginners Guide To Car Audio Systems
There's nothing like good music on a cool day while driving your car. Music can improve your day, and it is suitable for [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it’s now a leading face in a lot of areas. Kenwood started production in 1946 and established itself in Japan and later on in other countries. It has grown to become one of the most known brands of speakers for cars but has broadened its horizons towards home stereo units. So the question is, are Kenwood Speakers any good?
Well, let’s get into it.
Kenwood Speakers
Kenwood has a variety of speakers that you can pick from, such as high-power four-way speakers, two-way flush mount speakers, and three-way speakers. There are even five-way flush speakers.
These speakers have the capability to handle over 500 watts without blowing. The woofers are formed from polypropylene micro, which gives your music that boom bass. This way, you hear music free of distortion and background noise.
Performance
Kenwood usually has many speaker units with a range of features, such as butyl rubber, neodymium magnets, advanced crossover networks, and diamond array pattern diaphragms. These speakers allow for excellent power handling, and their sleek design gives them a very aesthetic look
Sound Quality
Another big deal for Kenwood Speakers is the sound quality. It offers Excelon that gives good sound range as well as sound quality. Note that these sound ranges differ according to the size and type of the speaker. Another thing that stands out is the durability of the speakers. You can be sure that you will go a very long time without changing any part of the speaker even if you live in harsh conditions.
Speaker Cone Construction
Kenwood was one of the first companies that started using urethane in speakers that optimizes cone movement when sound is getting reproduced. Additionally, the fiber-textured polypropylene is produced in such a way that they optimize strong lows and are great sounding.
There is also a speaker line produced by Kenwood with polypropylene mica composite cones and cloth edges. This is manufactured with a one-piece steel basket which means that durability is doubled because multiple pieces of steel wouldn’t loosen over time.
Compatibility and Pricing
One very nice thing about Kenwood Speakers is that it is made to be compatible with almost any car model. This way, any car amplifier will connect just fine to the speaker. This compatibility makes you able to connect your Kenwood Speaker to any system so far their OHMS and RMS ratings are compatible.
Additionally, their pricing is relatively affordable when compared to speakers of other brands, especially high-end brands. This way, you do not have to break the bank to enjoy the full range of Kenwood speakers’ capability. Also, like many speakers, Kenwood’s pricing is arranged according to frequency response and power handling.
Conclusion
To answer any extra questions, yes, Kenwood Speakers are good. Their sound production, durability, and price make them a good buy. They have been in the industry long enough and have truly made their mark.
Trending Links Related to Car Audio Amp For Sale in Sugar Land, TX.
There is no doubt that if searching for Car Audio Amp For Sale in Sugar Land, TX you have many options. Even though, car manufactuerer’s like Scion are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your car, and we‘re positive that you can find a local car audio installation shop Sugar Land, TX that it up to the task. We want to help you in this process be providing you the best deals on car stereo in or near Sugar Land, TX. From Car Audio DSP to Car Amplifier Wiring Kit we have what you are looking for. Many will tell you that music is the best way to change you mood and at Thunder Eletronics we want to be your go-to when searching for Car Audio Amp For Sale in Sugar Land, TX!