Car Subwoofer Boxes & Enclosures for 8-Inch Subs
If you are looking for a small subwoofer box to fit a tight space or simply just to add a little bit of low end to your car audio sound system, a Car Stereo 8-Inch Subwoofer Box may be your best bet! Because of their size, 8-inch car audio subs can generate remarkable crisp bass in a variety of enclosures. The sealed enclosure will yield the best result and the tightest, most accurate bass compared with other subwoofer sizes. However, high-performance, high-quality competition-style 8-inch subwoofer with big excursion are known for delivering deep bass and SPL when loaded into ported (bass reflex) and even bandpass enclosures. If you are unsure what to look for, consider an 8-inch car stereo subwoofer enclosure loaded with a driver with a competition-grade pressed paper cone, a high roll foam surround, and a high-temperature copper voice coil two inches in diameter or larger. Like always, there are exceptions to the rules, and there are some ultra-high-performance drives out there with neodymium motors exotic cone material like carbon fiber and r Kevlar but have the tendance to be a bit pricey. On the other side of that argument are those not into subwoofer box building. Don’t worry. Consider one of these loaded or empty 8-inch car stereo subwoofer enclosures, and you can’t go wrong!
- power rating: 200 watts rms / 600 watts max
- cone material: spun aluminum cone, surround material: high strength rubber epdm enhanced surround
- final impedance: 4-ohm, copper wound kapton voice coil, push type terminals
- 2, 100 Watt Max Power Triple 8" Loaded Vented Subwoofer Enclosure
- Features x3 8-inch SDR-8 D2 700 Watt Max Power Dual 2-ohm Car Subwoofers
- Enclosure was Engineered for Extreme Bass Output with it's Dual Slot Ports and Single Internal Subwoofer Chamber
- Rockville RW8CA 600 Watt 8" Active Sealed Slim Car Subwoofer.
- 600 Watts Peak Power / 150 Watts RMS. PWM MOSFET Power Supply.
- Low Level RCA Input. High Level Inputs with Auto Turn-On Technology.
- Amplifier Power Output: 120 Watts RMS
- 8" High performance subwoofer in a carpeted, vented enclosure
- High Level and RCA inputs for easy connection in any system set up
- RMS Power: 150 Watts
- Ultra-compact powered subwoofer system designed for tight locations
- Dimension: 13 7/8 x 9 3/8 x 3 1/8
- Power handling:
- 300 watts RMS
- 900 watts max
- All in one 8"(210mm) subwoofer with small unit design to fit under most vehicle seats.
- Built-in Class-AB amplifier, "All-In-One Bass Addition Package "no need for external amplifier.
- Die-cast aluminum heatsink.High quality material design and craftsmanship.Supports RCA (low level) OR speaker(high level) signal input from audio source
- BUILT-IN AMPLIFIER: With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for...
- VARIABLE LOW-PASS FILTER: A low-pass filter is an electronic circuit that removes all the notes below the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of...
- HIGH LEVEL INPUTS: Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO8 to your factory radio or an aftermarket radio that does not have low-level (RCA)...
- 8-inch subwoofer and 120W amplifier, housed together in a cast aluminum enclosure
- The compact size measures just 13.5” L x 9” W x 3” D so it can be installed under or behind a seat in a truck, in a sedan’s trunk or in an SUV’s hatch
- 32Hz-150Hz frequency response, Power Rating: 120W RMS. RCA (0.1-4V) / Speaker Input (1.5-30V/auto sensing)
- SDR Series Single 8-Inch Dual 2-ohm Loaded Subwoofer Enclosure
- Peak Power: 700 Watts | RMS Power: 350 Watts
- Pre-wired Internally for a 1 Ohm Final Impedance Load at the Terminals for an Easy Installation
- Universal fit - Dual chamber 8" Ported subwoofer Enclosure
- Competition Grade, high Performance subwoofer box | engineered to sound incredible
- Kerf (rounded) port design - allows for deep, accurate, and responsive bass
- The Punch 300-8P is a universal "all in one" self-contained subwoofer enclosure with built-in amplifier for dropping Bass in any factory or aftermarket system
- The 8" high output subwoofer is impedance optimized for the built in 300-watt class-D amplifier in a slim design enclosure - Dimensions: 11.4" x 17.6" x 5.6"
- Featuring an adjustable 12db/Octave low pass crossover, on board adjustable bass boost EQ, and on board phase switch
- 8-inch JBL BassPro SL powered under-seat compact subwoofer enclosure
- Power output: Peak: 250 watts RMS: 125 watts
- Efficient Class D amplifier
- New Forced-Air Cooling helps this CompRT sub run 20 percent cooler
- ONE 8" thin-mount CompRT subwoofer and a high-output reFLEX passive radiator which intensifies bass output
- Easily mounts in cargo area with no space issues, and resists stacking weight
- 700w Max / 250w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Single 8-Inch Vented Loaded Subwoofer Enclosure Bass Tube (Passive)
- Peak Power: 400 Watts | RMS Power: 200 Watts
- Dual 2-ohm Voice Coil Subwoofer wired internally to a 1-ohm Final Impedance Load
- Features: RockvilIe RQB8 Single 8" Side Ported Subwoofer Enclosure w/ Bed Liner
- Finished with Durable Bed Liner. 3/4" MDF. High Quality Spring Loaded Terminals
- Air Space: 1.0 Cubic Feet. Tuning Frequency: 34 HZ
- Pro Tuned 8” Dual Vented (divided air space) subwoofer enclosure designed for optimum bass response and low frequency reproduction which is ideal for high power or sound quality subwoofers.
- CNC Miter & Dado design and construction for the ultimate in air tight precision fit of all parts which ensures a rattle and noise free environment.
- Specially Formulated Aliphatic Wood Glue to ensure an airtight seal between all MDF parts with a second application of glue around all internal joints after final assembly.
- Space Saver - The combination of amplifier and subwoofer all into one, makes this ideal for spatially challenged vehicles. With a slim design, there are a few installation options. Embrace the Bass.
- Built-in Amplifier - A built-in 800 Max watt amplifier powers the subwoofer
- Pulse Width Modulated - This design controls the output voltage and current precisely by not only removing the output current sensing loss, but also eliminating all secondary feedback circuitry. It...
Last update on 2022-05-26 at 19:00 / Images Source Amazon Product API