Morel Car Speakers in Pine Hills, FL
When you’re looking Morel Car Speakers in Pine Hills, FL, you have to consider Thunder Eletronics. The main reason a lot of car stereo enthusiasts stop by electronics.net every month looking for things like car audio RCA cables is not because we are the cheapest but because DIY car audio enthusiast knowt that Thunder Eletronics offers a wide selection of amplifiers, car stereo receivers, changers, digital media receivers, equalizers, satellite radio, speakers, and subwoofers.
Don’t matter if you’re searching for Morel Car Speakers Pine Hills, FL or Car Audio Equalizer we know you will find our offerings adequate. That is because at Thunder Eletronics we put a lot of time and effort cooshing the products we offer so that you have the easiest car audio installation experience and a competition ready car audio system you will love and your friends would want to buy. So, tell all your friends for Morel Car Speakers in Pine Hills, FL check out Thunder Eletronics for great prices and best selling for Morel Car Speakers in Pine Hills, FL or Better Car Stereo Single DIN we’re sure you will fulfilled with the variety at ThunderElectronics.Net. For the best selection on better car stereo single din and fast expedited shipping, and no six for a nine games you can count on ThunderElectronics.Net…
Best Selling Morel Car Speakers Near Pine Hills, FL
- Diameter: 6.5 (approx)
- Sensitivity: 88
- Frequency response: 55-22000
- RMS Power Range : 140
- Morel Maximo Ultra 402 Coax 4" 45W RMS Maximo Ultra Series 2-Way Coaxial Speakers
- Treated paper composite woofer cone with butyl rubber surround
- Soft dome textile tweeter
- Sensitivity: 87.5 dB at 2.83 V
- Maximo Ultra 502 Coax - Morel 5.25" 70W RMS Maximo Ultra Series 2-Way Coaxial Speakers
- Treated paper composite woofer cone with butyl rubber surround
- Built-in Morel Crossover Resolution (MXR) crossover
- Handles up to 70 watts RMS (140 watts peak power)
- Morel Maximo Ultra Coax 602
- Power Handling: 110 W RMS | 220 W Max Transient Power
- Nominal Impedance: 4-Ohm | Sensitivity (2.83V/1M): 90 dB | Frequency Response: 50-22,000Hz | Crossover Point: 4500Hz
- Voice Coil Diameter: Woofer: 38mm (1.5") | Tweeter: 25mm (1")
- Magnet System: Woofer: High-Grade Ferrite | Tweeter: Neodymium
- Maximo Ultra 602 - Morel 6.5" 90W RMS Maximo Ultra Series 2-Way Component Speakers System
- 6-1/2" treated paper composite woofer cone with butyl rubber surround
- 1" soft dome textile tweeter
- External Morel Crossover Resolution (MXR) crossover
- 6-1/2" 2-Way Coaxial Speakers
- Peak: 320 watts per pair / 160 watts each
- RMS: 180 watts per pair / 90 watts each
- Impedance: 4 Ohm
- 2-way 4" speakers (pair) | Treated paper composite woofer cone with rubber surround
- Steel woofer basket | 1" soft dome silk tweeter
- Built-in MXR crossover | Handles up to 60 watts RMS (140 watts peak power)
- Frequency response: 80-22,000 Hz | Sensitivity: 85 dB at 2.83 V
- 8" 2-Way Car Audio Component Speaker System
- Peak: 600 watts per pair / 300 watts each | RMS: 200 watts per pair / 100 watts each
- Sensitivity: 92dB | Frequency Response: 40Hz - 20,000Hz
- Treated Paper Composite Cone | Neodymium Magnet Motor
- Peak: 600 watts per set / 300 watts each side
- RMS: 280 watts per set / 140 watts each side
- Impedance: 4 Ohms
- Sensitivity: 88 dB
- 6-1/2" 2-Way Coaxial Speakers
- Peak: 440 watts per pair / 220 watts each
- RMS: 240 watts per pair / 120 watts each
- Impedance: 4 Ohm
- Nominal Impedance: 4-Ohm | Power Handling: 140W | Max Transient Power: 250W
- Sensitivity (2.83V/1M): 92dB | Frequency Response: 35-22000Hz | Crossover Point: 2800 Hz
- Voice Coil Diameter: Woofer: 1.5" | Tweeter: 1.125" | Voice Coil Wire: Copper
- Magnet System: Woofer: High Grade Ferrite | Tweeter: Neodymium
- Peak Power Handling: 300 Watts
- RMS Power Range : 100 Watts
- Frequency response: 70-22000 Hz
- Sensitivity: 88 dB
- 6-1/2" 2-Way Component Speakers
- Peak: 500 watts per pair / 250 watts each
- RMS: 260 watts per pair / 130 watts each
- Impedance: 4 Ohm
- Maximo Ultra 502 - Morel 5.25" 80W RMS Maximo Ultra Series 2-Way Component Speakers System
- Handles up to 80 watts RMS (160 watts peak power)
- sensitivity: 89 dB at 2.83 V
- frequency response: 50-20,000 Hz
- 6-1/2" 3-Way Component Speakers
- Peak: 1200 watts per pair / 600 watts each | RMS: 280 watts per pair / 140 watts each
- Impedance: 4 Ohm | Frequency Response: 35Hz - 25,000Hz | Sensitivity: 91 dB
- CDM700 3.5" Midranges | MT300 1.8" Tweeters | MXR300.4 Crossovers
- Maximo Ultra 692 Coax - Morel 6" x 9" 100W RMS Maximo Ultra Series 2-Way Coaxial Speakers
- sensitivity: 92 dB at 2.83 V
- treated paper composite woofer cone with butyl rubber surround
- soft dome textile tweeter
- 5.25-inch two-way component speaker system with external crossover and 160 watts maximum power handling
- Woofers feature ferrite magnet and proprietary Acudamp cone coating for clean, linear response and increased bass dynamics
- 1-inch soft dome tweeters with EVC technology and neodymium magnet; installation kit for flush and various surface angle mounts
- Outboard 12 dB/octave crossover network with high-quality film capacitors and large-gauge inductors
- Power Handling 40 Wrms / 80 Watts Peak Power
- Sensitiity (2.83V/1M)(dB)
- FREQUENCY RANGE (Hz) 300 - 19,000
- Crossover High-pass i350Hz
Last update on 2024-07-31 / Images Source Amazon Product API
Blog Post Related to Morel Car Speakers in Pine Hills, FL.
Is Soundstage & Imaging in a Vehicle Possible?
Although not easy, the answer to that is a resounding YES! I personally have owned several car stereo systems that rival [...]
Do aftermarket stereos add value to your car?
In the car world, people always want to make their driving experience better. One way they do this is by changing the [...]
Is Jensen a Good Car Audio Brand
The right automotive audio equipment is crucial for a pleasurable driving experience, whether commuting to work or on a road trip. Jensen may [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it’s now a leading face in a lot of areas. Kenwood started production in 1946 and established itself in Japan and later on in other countries. It has grown to become one of the most known brands of speakers for cars but has broadened its horizons towards home stereo units. So the question is, are Kenwood Speakers any good?
Well, let’s get into it.
Kenwood Speakers
Kenwood has a variety of speakers that you can pick from, such as high-power four-way speakers, two-way flush mount speakers, and three-way speakers. There are even five-way flush speakers.
These speakers have the capability to handle over 500 watts without blowing. The woofers are formed from polypropylene micro, which gives your music that boom bass. This way, you hear music free of distortion and background noise.
Performance
Kenwood usually has many speaker units with a range of features, such as butyl rubber, neodymium magnets, advanced crossover networks, and diamond array pattern diaphragms. These speakers allow for excellent power handling, and their sleek design gives them a very aesthetic look
Sound Quality
Another big deal for Kenwood Speakers is the sound quality. It offers Excelon that gives good sound range as well as sound quality. Note that these sound ranges differ according to the size and type of the speaker. Another thing that stands out is the durability of the speakers. You can be sure that you will go a very long time without changing any part of the speaker even if you live in harsh conditions.
Speaker Cone Construction
Kenwood was one of the first companies that started using urethane in speakers that optimizes cone movement when sound is getting reproduced. Additionally, the fiber-textured polypropylene is produced in such a way that they optimize strong lows and are great sounding.
There is also a speaker line produced by Kenwood with polypropylene mica composite cones and cloth edges. This is manufactured with a one-piece steel basket which means that durability is doubled because multiple pieces of steel wouldn’t loosen over time.
Compatibility and Pricing
One very nice thing about Kenwood Speakers is that it is made to be compatible with almost any car model. This way, any car amplifier will connect just fine to the speaker. This compatibility makes you able to connect your Kenwood Speaker to any system so far their OHMS and RMS ratings are compatible.
Additionally, their pricing is relatively affordable when compared to speakers of other brands, especially high-end brands. This way, you do not have to break the bank to enjoy the full range of Kenwood speakers’ capability. Also, like many speakers, Kenwood’s pricing is arranged according to frequency response and power handling.
Conclusion
To answer any extra questions, yes, Kenwood Speakers are good. Their sound production, durability, and price make them a good buy. They have been in the industry long enough and have truly made their mark.
Popular Links Related to Morel Car Speakers in Pine Hills, FL.
Without a question that when looking for Morel Car Speakers in Pine Hills, FL you have many options. Although, car manufactuerer’s like Lotus are making a lot more difficult to install aftermarket car audio you can still have a good sound system in your vehicle, and we‘re sure that you can find a professional car stereo installation shop Pine Hills, FL that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car audio in or near Pine Hills, FL. From Car Audio Equalizer to 10-Inch Car Subwoofer Box we got you covered. It is often said that music is life and at ThunderEletronics.Net we want to be your best option when looking for Morel Car Speakers in Pine Hills, FL…