Car Audio Amplifier Monoblock in St. Petersburg, FL
When you are looking Car Audio Amplifier Monoblock in St. Petersburg, FL, you should consider our car audio store. One of the reasons hundreds of car stereo enthusiasts stop by electronics.net every day searching for things like car audio online is not because we are the cheapest but because car stereo enthusiast into DIY car stereo installation knowt that our car audio outlet offers a wide selection of low prices car subwoofers, car amplifiers, car speakers and electronics with FREE shipping.
Whether you are searching for Car Audio Amplifier Monoblock St. Petersburg, FL or Preloaded Subwoofer Boxes we are pretty sure you will find our selection fulfilling. That is because we put a lot of time and effort selecting the products we sell so that you have the easiest car audio installation experience and a top of the line car audio system you can be proud of and your friends would want to purchase. So, tell all your friends for Car Audio Amplifier Monoblock in St. Petersburg, FL take a look at Thunder Eletronics for great prices and best selling for Car Audio Amplifier Monoblock in St. Petersburg, FL or Car Audio Fabrication we’re sure you will happy with the options at Thunder Electronics. For the best prices on car audio speaker 3.5 inch and fast expedited shipping, and no games you can count on ThunderElectronics.Net…
Best Selling Car Audio Amplifier Monoblock Near St. Petersburg, FL
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- By Orion High Performance Car Audio
- CBT4500.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
- Watts @ 1 Ohm Mono 14.4V: 1200W
- Max Music Peak Power: 4500W
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining...
- Small Footprint and Sturdy Design: Made it precision metal potentiometer for precise tuning and sturdy construction.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- MOSFET POWER SUPPLY: This powerful amplifier is outfitted with metal oxide semiconductor field-effect transistors that allow it to quickly switch from full to non-conduction operation for high efficiency...
- MAX POWER OUTPUT: 3000 watts into a single channel at 2 ohms. Maximum power output of 1250 watts into a single channel at 4 ohms. This amplifier is intended to power your subwoofer(s), giving them the...
- SLIM SIZE DESIGN: This amplifier has a slim design that makes it very convenient. It comes complete with all necessary mounting hardware for easy installation. This is very portable and lightweight to...
- VARIABLE BASS BOOST: Variable bass boost makes it easy to customize the low bass within the boost range to your preferences. Enhanced audio and bass, easy to use with user friendly controls. Reliable with...
- Ultra Compact MOSFET Monoblock Class D Car Amplifier
- RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
- Frequency Response: 15Hz - 270Hz
- Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
- PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
- MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
- SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
- Power: 1 Channel Monoblock amplifier delivers 5000 watts max power to a single channel. No need to bridge, this is done internally in this car amplifier. 2000 watts of RMS power to your subwoofers.
- Strapable Operation: You can double the load by strapping 2 of these monoblock amplifiers to double your power output. These amps are durable and built to deliver monster power to your speakers.
- Build Specs: The OD1-5000D is built with a Military Grade PCB and with a PWM mosfet power supply. This amp also comes with direct short, thermal, & overload circuit protection to make sure your amplifier...
- In the Box: In the mono amp packaging you will find mounting brackets, a manual, bass knob and cable and of course a monster of an amplifier. Power Acoustik recommends professional installation and solid...
- Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Last update on 2024-07-31 / Images Source Amazon Product API
Article Related to Car Audio Amplifier Monoblock in St. Petersburg, FL.
Is Skar a Good Car Audio Brand?
If you are into car stereo, you just can't ignore Skar Audio. Although this is a relatively young company, since launching its first [...]
How Can I Improve The Sound In My Car?
It is 2022, and nowadays, we can choose from a wide range of electric cars and even self-driving cars. Nevertheless, the [...]
What is a Good Single DIN Car Radio?
Over the last decade, the single DIN radio has faded as more vehicles feature or switch to info-centers. These are the touch screen [...]
Do Aftermarket Car Stereos Sound Better?
Car manufacturers give their stereos a limited amount of power. Adding an amplifier can dramatically improve the head unit’s output to the speakers and make them sound louder and clearer. Start upgrading your car with a new aftermarket stereo. It will not only enhance your listening experience, but it can also increase the value of your vehicle when you sell it.
Speakers
Whether you want to boost the volume on your favorite tunes or watch videos while you drive, the speakers used in a replacement stereo have an impact on sound quality. Look for a pair with high sensitivity ratings and power-handling capabilities that match the output of your new head unit and amplifiers.
Factory stereos are designed with cost and commonality in mind, aiming to provide the average car owner with a decent audio experience. Aftermarket stereos use better components that offer superior built-in power and improved circuit design for cleaner, richer, more detailed audio.
Some aftermarket stereos come with extra features that make driving easier and more fun. For instance, a stereo that is compatible with phone operating systems like iOS and Android lets you use music apps and hands-free calling while on the road. Some even include GPS navigation that prevents you from getting lost while enjoying your favorite songs. Others have superb displays and changing light schemes that heighten the aesthetics of your vehicle’s interior.
Amplifier
For a great audio experience, stereos need to be paired with an amplifier. Look for one that has multiple channels for a more customizable sound and offers presets to help you adjust the audio settings. The amplifier also needs to be compatible with the vehicle to prevent damage.
Some aftermarket stereos include lighting that flashes to the beat, adding a fun and modern touch to the car interior. Others have high-tech displays with unique layouts that enhance the visual appeal of the device.
If you choose a touchscreen stereo, look for Apple CarPlay and Android Auto integration to bring your smartphone features into the vehicle. This allows you to use phone apps for navigation, music streaming, and hands-free calling while driving. Regardless of what type of stereo you choose, ensure the user interface is intuitive to keep you focused on the road. Look for buttons that are easy to press and have a good hand feel.
Subwoofers
Adding bass to your stereo with a subwoofer is a great way to bring more depth and clarity to your music. However, some factory stereos don’t come equipped with RCA pre-outs (the red and white inputs that rca jacks plug into to produce sound), so you can’t add an aftermarket subwoofer system.
Upgraded stereos can also include more advanced technology than your factory unit. You can find units with Bluetooth connectivity, compatibility for Apple CarPlay or Android Auto, and rearview camera integration. Some models even offer voice control.
You can find a good quality aftermarket stereo for about $100. Look for a single- or double-DIN receiver. You’ll also want to choose a model with a touchscreen. These are the best for connecting to your phone for music streaming and hands-free calling. Some models have GPS navigation, as well, which can help you avoid getting lost while driving. This feature is especially useful for drivers who commute long distances or frequently take new routes.
Display
In the past, upgrading your factory head unit was a common practice in search of greater sound power and quality. But the landscape of aftermarket car stereos is changing, and there are a few things to keep in mind before you make the upgrade.
In particular, removing your factory stereo can disable important features like steering wheel audio controls and integration with OEM telematics systems such as On Star. If you want to hang on to these features, be sure the new stereo can integrate with them by looking for compatibility info or purchasing a wireless adapter.
In addition to a stunning, interactive touchscreen display, the best aftermarket stereos feature built-in essentials like smartphone integration and voice control. Many of these units also fit dash openings that were previously too small for touchscreen receivers. If you’re ready to improve the experience in your vehicle, use our vehicle fit tool to explore your options. You can even find a model with built-in GPS navigation to help you get to your destination.
Top Links Related to Car Audio Amplifier Monoblock in St. Petersburg, FL.
Without a question that if looking for Car Audio Amplifier Monoblock in St. Petersburg, FL you have many options. Although, car manufactuerer’s like Karma are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your vehicle, and we are certain that you will be able to find a local car stereo installation place St. Petersburg, FL that it up to the task. At Thunder Electronics we want to help you in this process be providing you the best deals on car stereo in or near St. Petersburg, FL. From Car Stereo Amplifier 6-Channel to Car Audio Battery we got you covered. Many will tell you that music is the best medicine there is and at ThunderEletronics.Net we want to be your go-to when searching for Car Audio Amplifier Monoblock in St. Petersburg, FL…