Car Audio Amplifier Monoblock in Bloomington, IN
When you are looking Car Audio Amplifier Monoblock in Bloomington, IN, you should consider ThunderEletronics.Net. The reason many car audio enthusiasts visit electronics.net every day looking for things like car audio online is not because we are the cheapest but because stereo enthusiast who like to work in his/hers vehicle knowt that our car audio shop has a broad selection of stereos, speakers, subs, and amps plus fast shipping.
Don’t matter if you’re searching for Car Audio Amplifier Monoblock Bloomington, IN or Car Audio Capacitor we know you will find our collection impressive. That is because we put a lot of effort researching the products we sell so that you have the easiest car audio installation experience and a top notch car stereo system you will love and your friends would want to purchase. So, tell all your friends for Car Audio Amplifier Monoblock in Bloomington, IN stop by ThunderEletronics.Net for great prices and lastest technology for Car Audio Amplifier Monoblock in Bloomington, IN or Car Audio Battery we are sure you’ll content with the seletion at our site. For the best selection on car audio fabrication and fast expedited shipping, and misleading social media ads you can count on Thunder Electronics…
Best Selling Car Audio Amplifier Monoblock Near Bloomington, IN
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- By Orion High Performance Car Audio
- CBT4500.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
- Watts @ 1 Ohm Mono 14.4V: 1200W
- Max Music Peak Power: 4500W
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining...
- Small Footprint and Sturdy Design: Made it precision metal potentiometer for precise tuning and sturdy construction.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- MOSFET POWER SUPPLY: This powerful amplifier is outfitted with metal oxide semiconductor field-effect transistors that allow it to quickly switch from full to non-conduction operation for high efficiency...
- MAX POWER OUTPUT: 3000 watts into a single channel at 2 ohms. Maximum power output of 1250 watts into a single channel at 4 ohms. This amplifier is intended to power your subwoofer(s), giving them the...
- SLIM SIZE DESIGN: This amplifier has a slim design that makes it very convenient. It comes complete with all necessary mounting hardware for easy installation. This is very portable and lightweight to...
- VARIABLE BASS BOOST: Variable bass boost makes it easy to customize the low bass within the boost range to your preferences. Enhanced audio and bass, easy to use with user friendly controls. Reliable with...
- Ultra Compact MOSFET Monoblock Class D Car Amplifier
- RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
- Frequency Response: 15Hz - 270Hz
- Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
- PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
- MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
- SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
- Power: 1 Channel Monoblock amplifier delivers 5000 watts max power to a single channel. No need to bridge, this is done internally in this car amplifier. 2000 watts of RMS power to your subwoofers.
- Strapable Operation: You can double the load by strapping 2 of these monoblock amplifiers to double your power output. These amps are durable and built to deliver monster power to your speakers.
- Build Specs: The OD1-5000D is built with a Military Grade PCB and with a PWM mosfet power supply. This amp also comes with direct short, thermal, & overload circuit protection to make sure your amplifier...
- In the Box: In the mono amp packaging you will find mounting brackets, a manual, bass knob and cable and of course a monster of an amplifier. Power Acoustik recommends professional installation and solid...
- Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Last update on 2024-07-31 / Images Source Amazon Product API
Blog Related to Car Audio Amplifier Monoblock in Bloomington, IN.
Perfect Speaker for Your Car
Your car's audio system plays a crucial role in enhancing the overall driving experience. A key component of this system is the [...]
What is an Audiophile Car Stereo System?
Before we dive into what makes an audiophile car audio system, I think we need to define what an audiophile is. [...]
How do I know what speakers to get for my car?
People always ask, How do I know what speakers to get for my car? The car audio experience has evolved significantly over [...]
Are JL Subwoofers Any Good?
JL Audio is one of the most notable names in the audio business. You can’t escape them. They make amplifiers, subwoofer systems, OEM interfaces, subwoofer drivers, enclosed systems, and in-wall subwoofers. Doing this, they have been serving different kinds of customers worldwide since 1975, from audiophiles to DJs and music producers. JL Audio is seen as the foremost manufacturer of high-performing audio products for boat, car, and campervan owners.
However, what truly stands out for this brand are its subwoofers. For decades now, it’s been seen as something of a standard in the industry. Flexing its engineering achievement is especially seen in the VXi amplifiers, which are known to combine digital signal processing and high-performance speakers. JL Subwoofers have ranked among the best subwoofers one can get, no matter the price, since their first sojourn into the market with the Fathom and Gotham subwoofers.
JL Subwoofer
There are a lot of subwoofers to pick from, depending on the strength of your pocket. There are the budget-friendly ones that give you more quality for your money and the high-end ultra sleek ones that audiophiles would love. So let us look at some of the best subwoofers that JL has to offer.
The most popular sizes for the JL subwoofers are between 8 to 12 inches and are usually made with three things in mind: space, budget, and bass needs. There are other things such as price and ease of installation, but here we will be focusing on the initial three we mentioned. For the most part, JL Subwoofers really focus on sound quality so much so that no matter how loud you like your music, it would always sound crisp and clean with no distortion. The other thing is the bass. The bass will make you change the way you listen to music forever.
Design
The JL Subwoofers integrate a lot of technologies that have been refined over the years. This is why you would see the subwoofers carry some designs with names such as VRC (Vented Reinforcement Collar), Engineered Lead-Wire System, DMA (Dynamic Motor Analysis), and FCAM (Floating Cone Attach Method). The drivers of the subwoofers usually come with a sealed design and a deep depth. This makes the driver quite massive, almost filling up the cabinet because of the deep motor structure.
The JL subwoofers are also designed to be able to analyze the forces of the driver taking into account the behavior of the system under different power inputs. This way, the performance of the subwoofers is optimized no matter the power input. Additionally, when the sound system in JL Subwoofers are designed, they use the FEA system for good surround geometry for the custom driver.
Installation
JL Subwoofers are known to be quite easy to install, which is why most of their models come with high-value features such as a ground lift switch, 24 dB/octave high-pass filter, and removable plugs.
Conclusion
Most of their products are quite expensive depending on how you look at them, but you will always get your money’s worth.
Top Links Related to Car Audio Amplifier Monoblock in Bloomington, IN.
There is no doubt that when searching for Car Audio Amplifier Monoblock in Bloomington, IN you have many options. Even though, car manufactuerer’s like Plymouth are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your vehicle, and we are positive that you can find a local car audio installation shop Bloomington, IN that it up to the task. We want to help you in this process be offering you the best deals on car audio in or near Bloomington, IN. From Car Audio Equalizer to Car Audio Battery we got you covered. Many will tell you that music is the best medicine there is and at ThunderEletronics.Net we want to be your first choice when searching for Car Audio Amplifier Monoblock in Bloomington, IN.