Car Amp Sale in Sandy Springs, GA
When you are seeking Car Amp Sale in Sandy Springs, GA, you should consider our car audio store. One of the reasons thousands of car audio enthusiasts visit our site every year looking for things like car stereo walmart is not because we are the cheapest but because car stereo enthusiast into DIY car stereo installation knowt that ThunderEletronics.Net offers a wide selection of everything from car speakers, car amps and car stereos to MP3 decks and subs with FREE shipping.
Don’t matter if you are looking for Car Amp Sale Sandy Springs, GA or Dash Camera For Car we are confident you will find our inventory fulfilling. That is because we make a great effort cooshing the products we offer so that you have the easiest car audio installation experience and top rated car audio system you will love and your friends would want to buy. So, tell all your friends for Car Amp Sale in Sandy Springs, GA stop by ThunderEletronics.Net for great prices and up to date for Car Amp Sale in Sandy Springs, GA or Car Audio Midrange & Midbass we are sure you will happy with the inventory at ThunderElectronics.Net. For the best selection on preloaded subwoofer boxes and fast expedited shipping, and no six for a nine games you can count on ThunderElectronics.Net.
Best Selling Car Amp Sale Near Sandy Springs, GA
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 4 channels x 375 watts @ 2 ohms
- 4 channels x 185 watts @ 4 ohms
- 2 channels x 750 watts (mono bridged) @ 4 ohms
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 4 Channel, strong power dynamic voice restores high degree of sound.
- Aluminium alloy drawing process, slim design, easy to install.
- Great heat dissipation performance, safe and stable.
- Energetic, strong power, easy to promote sub woofer. Nondestructive amplifier installation, 360°round sound.
- 2 Ohm Stable Operation & Soft Turn On Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Remote Turn-On / Turn-Off Circuit
- 2000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system; Gives you up to 2000W bridgeable output; Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss; The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience;...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection; Has been specially designed from the bottom up to provide safe...
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- 4000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x...
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4...
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB...
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry....
- 1,700 Peak Amps; 425 Cranking Amps
- Clore PROFORMER Battery Technology
- 68" 2 AWG Welding Cable Leads
- Heavy Duty Powerjaw Clamps
- POWER - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss &...
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- The Taramps DS line has Multichannel amplifiers, which are Full Range amplifiers with 2 or 4 channels, and also features high power and cost-benefit.
- The DS 440x4 has 440 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multi-channel amplifier features 4 channels with 110 Watts RMS each (440 watts RMS total) and also with high-level input and automatic activation.
- The Positive/Negative Power Cable is 9 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 50A.
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use...
- Powerful Performance: The Schumacher SC1361 delivers a 50 cranking amps engine start with a 10-amp boost and 6-amp2-amp charge/maintain modes, which is strong enough to charge car, SUV, truck, and other...
- Microprocessor Controlled: After gathering information from the connected battery, the microprocessor adjusts the charge, allowing fast charging without negatively impacting battery capacity and longevity
- Boost Battery Health: The SC1361 Jump Starter and Battery charger features multi-stage charging and float mode monitoring for optimum battery health and extended battery life
- Advanced Charging Algorithm: Multi-stage charging employs an advanced charging algorithm to maximize battery charge, battery health, and the lifespan of your battery
- Each pack contains 2 units of "For Sale" sign made of plastic
- Size of each sign is 9" x 12"
- Each sign has two lines on it for additional description
- Bright color labels draw customer's eye so that improve selling efficiency
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
Last update on 2024-12-06 / Images Source Amazon Product API
Article Related to Car Amp Sale in Sandy Springs, GA.
Is an Aftermarket Car Stereo Worth It?
In the world of automotive customization, the car stereo system holds a special place, acting as the auditory gateway to a driver's world. [...]
Buick Grand National Car Stereo System
Since I was in high school, I always wanted to have a Buick Grand National. Maybe it is just me, but I always [...]
Choosing the Right Car Audio Crossover
When you hear people talk about car audio, you often hear about head units, amplifiers, speakers, subwoofers, and even car audio batteries and [...]
How Much Should I Pay For a Car Stereo?
A car stereo is an important part of your music system, and it can have a big impact on the sound quality. The best stereos offer crisp sounds, adjustability for tone and balance, and extra channels to add speakers and amplifiers. Look for a car stereo with smartphone mirroring or Apple Car Play and Android Auto compatibility. These systems allow you to control music playback and make hands-free calls.
Sound quality
The sound quality of a car stereo depends on many factors, including the type and quality of speakers. It is also important to consider the head unit, which controls all other system components. The head unit can be single-DIN or double-DIN, and some kits can fit it into a smaller space.
The best car stereos feature high-quality built-in DECs, which reduce digital noise and distortion. They can also support more advanced digital audio control features, such as digital time correction and parametric equalization. This helps to ensure that your music sounds crisp and clean.
If you want a new stereo with advanced technology, you should look for one that supports Apple CarPlay or Android Auto. These systems allow you to use your smartphone’s navigation, calling, news, audible and voice-texting, and podcast apps. Some also have a touchscreen and integrate your steering wheel controls. It is also important to choose a stereo that has a USB port that can accommodate your iDevice.
Frequency response
Car stereos are a key component of your vehicle’s sound system. They play music, control your navigation system and allow you to make phone calls. They also transmit audio signals to the amplifier, which creates the overall sound. If your car stereo sounds flat or has a low frequency response, you may want to consider having it fixed. This can be a costly endeavor, but it can improve the quality of your audio system.
The cost of a new car stereo can vary depending on the type of head unit and your vehicle’s features. A simple single-DIN radio fitting a 2×8-inch opening can be less than $50, while a high-quality JVC, Kenwood, Pioneer or Sony model with a large touchscreen display can cost $150 to $200. Some models offer unique, personalized features, such as multicolored displays that match your music mixtures or dash lighting. You can also install a premium subwoofer to enhance the sound.
Start up time
If you’re looking to upgrade your car’s audio system, there are many options. You can choose between a simple head unit or a more advanced stereo that features a CD player and a touchscreen display. You can also add a subwoofer and an amplifier to your system for more bass and sound quality.
Whether you’re installing a new head unit or adding speakers, it’s always wise to have a professional install your car stereo. These professionals have low overhead so that they can offer affordable rates. Some even offer a warranty on their work.
Car stereo installation businesses are typically run as a sole proprietorship or LLC. These businesses often pay self-employment taxes and may have seasonal slow periods. This can make the business more unpredictable than other types of small businesses. However, if you’re committed to your passion and have the right marketing strategies, this business can be profitable. The car stereo is the heart of your vehicle’s entertainment system, and it’s important to keep it running at its best.
Bluetooth calling
A good stereo system has a subwoofer and amp that will allow you to play your music files at a higher volume without losing depth and sound quality. This system is a must-have for anyone who wants to crank up their music at a higher volume and experience booming bass. However, installing this system in your vehicle will increase the cost as it requires a more complicated installation with technical specifications.
The most requested feature is Apple Car Play or Android Auto, which allows you to integrate your iPhone or smartphone into the stereo for navigation, core streaming apps (like Pandora, heartrending, and Spottily), or handling calls and texts safely and conveniently. These systems are more expensive than standard stereos, but they’re worth the price if you want to maximize your stereo’s capabilities.
You should also keep in mind that not every Bluetooth stereo supports all protocols. Check out ThunderEletrconics.Net list of compatible Bluetooth protocols to find the stereo that’s right for you.
Trending Searches Related to Car Amp Sale in Sandy Springs, GA.
Without a question that when looking for Car Amp Sale in Sandy Springs, GA you have many options. Even though, car manufactuerer’s like Subaru are making a lot more difficult to install aftermarket car audio you can still have a better than OEM car audio system in your car, and we are confident that you will be able to find a local car stereo installation store Sandy Springs, GA that it up to the task. We want to help you in this process be offering you the best deals on car stereo in or near Sandy Springs, GA. From Car Audio Crossovers to Car Audio Speaker 5.250 Inch we have what you are looking for. It is often said that music is the best medicine there is and at ThunderEletronics.Net we want to be your go-to when looking for Car Amp Sale in Sandy Springs, GA…