Car Stereo Amplifier 5-Channel in Bloomington, IN
If you are seeking Car Stereo Amplifier 5-Channel in Bloomington, IN, you have to consider our car audio store. The main reason thousands of car audio enthusiasts visit our site every week looking for things like car stereo amplifier is not because we are the cheapest but because car stereo enthusiast into DIY car audio installation knowt that Thunder Eletronics offers a wide selection of car amplifier, sub enclosures, head units, and signal processors.
Don’t matter if you’re looking for Car Stereo Amplifier 5-Channel Bloomington, IN or Car Stereo Double DIN we are confident you’ll find our collection fulfilling. That is because at Thunder Eletronics we put a lot of effort cooshing the products we offer so that you have the easiest car audio installation experience and a competition ready car stereo system you can be proud of and your friends will wish they had. So, tell all your friends for Car Stereo Amplifier 5-Channel in Bloomington, IN take a look at Thunder Eletronics for great prices and up to date for Car Stereo Amplifier 5-Channel in Bloomington, IN or Car Audio Fabrication we are sure you will satisfied with the options at our website. For the best selection on 8-inch car subwoofer and fast expedited shipping, and no six for a nine games you can count on Thunder Electronics.
Best Selling Car Stereo Amplifier 5-Channel Near Bloomington, IN
- Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Specs - Dimensions: 17” x 10.31” x 2.25”, Weight: 12.53 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 103 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 40 Amp...
- Includes: Amplifier. Bass Remote. Birth sheet with tested power. Owner’s manual. Mounting Screws. Warranty.
- Rockville dB55 4000 Watt/2000 Watt RMS 5 Channel Amplifier. CEA Compliant Power Ratings (Rated at less than 1 % distortion) (Use these CEA ratings when matching and comparing with other CEA compliant...
- RMS Power Ratings: (Use these RMS ratings when comparing with great brands such as Hifonics, Earthquake, Soundstream, etc). 2 Ohm 240 Watts x 4 + 1000 Watts x 1. 4 Ohm: 160 Watts x 4 + 600 Watts x 1. Peak:...
- High-Speed MOSFET Power Supply. Rugged switching MOSFETs for Class D in CH5. Under Voltage Protection at 10V. Over Voltage Protection at 16V. Optical Coupler Class “AB” +“D” Technology....
- High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low...
- Output Coil with Magnetic Shield prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.
- Detachable sliding terminal cover offers a sleek design and easier installation.
- All terminals and connections are on one side for easier installation and a cleaner look.
- Rockville RXH-F5 3200 Watt Peak/1600w RMS 5 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 4 Ohms: 550 Watts (4 x 50 Watts + 1 x 350) at 4 ohms and 1% THD+N. 2
- Channels 1 through 4 are class A/B and channel 5 is mono class "D". High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover with Differential...
- CH3 & CH4 Low Pass 500Hz - 3KHz. CH5 Low Pass 50Hz - 250Hz. CH3 & CH4 High Pass 50Hz - 1KHz. High Level Input Auto Start Smart Turn-On. Full IC-Controlled Protection Circuitry. Remote Dashboard Subwoofer...
- 2 Ohm Stable Stereo. 4 Ohm Mono Bridgeable. 3 Channel Mixed-Mono Capable. Channel 5 - 2 Ohm Mono Capable. 2 CH / 4 CH / 5 CH Input Mode Selector.
- RMS Power: 60 watts x 4 chan. + 200 watts @ 4 ohms, 80 watts x 4 chan. + 350 watts @ 2 ohms, 160 x 2 chan. + 350 watts @ 4 ohms Bridged
- Total Peak Power: 640W
- Dash Mount Remote Bass Level Control Included
- Dimensions: 4.75"W x 10.3"L x 2"H
- Digital Class-D: Packs a powerful punch with high efficiency and an incredible small form factor.
- Small Footprint and Sturdy Design: Built to the highest standards for lasting reliability.
- Robust Unregulated Power Supplies: Designed to provide superior performance and unmatched efficiency.
- Designed with Advanced HEXFET Power MOSFET: Reduced on-resistance, faster switching speeds, and unparalleled reliability.
- Features: 5-channel car amplifier,
- 180 watts RMS x 2 bridged at 4 ohms + 300 watts RMS x 1 at 2 ohms
- includes hardware for vertical mounting
- preamp and speaker-level inputs
- Wired remote level control for subwoofer channel included, RCA inputs, MAXI Fuse rating: 100A, Dimensions: 8.25"W x 2"H x 13.50"L, 2-ohm Stereo & 4-ohm Bridged Impedance Stability
- Direct Short, Thermal, & Overload Circuits Protect Amplifier, Hybrid Aluminum Alloy Heatsink for Optimum Dissipation, 250mV - 8V High-Level Speaker Input or Low-Level RCA Input
- 5-channel Amplifier, Class-D Amplifier Technology, Front and Rear Channels: Variable high- and low-pass filters (50-4000K Hz, 12 dB/octave), Bandpass setting with a low-pass filter for Rear Only(250-4000...
- Subwoofer channel: Variable low-pass filter (30-150 Hz, 12 dB/octave), Variable bass boost (0-12 dB at 45 Hz)
- Ultra Compact MOSFET 5-Channel Class D Car Amplifier
- RMS Power @ 2 Ohm: 85 Watts x 4 + 450 Watts x 1 (14. 4v)
- Frequency Response: 10Hz - 20kHz for CH 1-4 & 10Hz - 500Hz for CH 5
- Crossover Control: HPF / Full-Range / LPF | Built In 4-Way Protection Circuitry
- Power - 300 max x 4 @2-Ohms plus 5th channel 600 watts max x 1 @2-Ohms, 150 max x 4 @4-Ohms plus 5th channel 300 max x 1 @-4-Ohms, 600 max x 2 bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss &...
- Class A/B full-range channels
- Class D bass channel included for one amp to run an entire system
- Three-second turn-on/off delay to eliminate unwanted interference
- Variable 12dB crossovers provides control to dial in perfect sound
- High Efficiency Class D Full Range Amplifiers
- Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- 2-ohm Stereo & 4-ohm Bridged Class D Full Range
- Monoblock Bridging Capability for Double Amplifier Application
- 3000W RMS / 6000W MAX POWER: The Lanzar 6000 watt 2 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 3000W x 2 output at 4 ohms or 6000W x 1 bridged...
- FULL RANGE CROSSOVERS: This product features a low / high pass variable crossover for versatility and precise control by being able to fine tune your music. The speaker / subwoofer terminals are to...
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 2 ch amp is also equipped with a 2x40 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- ADVANCED TECHNOLOGY: The professional series amplifiers are designed to incorporate DC to DC switching power supplies that provide headroom for even the most demanding peaks and dynamic ranges found in...
- INTELLIGENT DESIGN: The car audio amplifier features include power and protection LED indicators; soft turn-on/off; and advanced protection circuitry.
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest. Silver RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier and...
- RCA JACKS: The line-out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal. This makes it easier to bring one set into the first amp, then use...
- Features: Power Acoustik RE5-3000D 3000 Watt 5-Channel Car Amplifier. 5 Channel Full Range Operation 2-Ohm Stable Class A/B Amplifier. MAX Power: 3000 Watts
- 4 Ohm RMS: 100 Watts x 4 + 350 Watts x 1. 2 Ohm RMS: 150 Watts x 4 + 500 Watts x 1. 4 Ohm RMS Bridged: 300W x 2 + 500 Watts x 1. Direct Short, Thermal, & Overload Circuits Protection
- 200mV-6V High Level or Low Level RCA Input. Tri-Mode Capable. Variable 12dB High, Low, & Subsonic Crossovers. Variable 12dB Band-Pass Crossovers. Direct Wire 4ga. Power & 12ga Speaker Terminals
- Dash Mounted Remote Gain Control. Product Dimensions (L x W x H): 15" x 8.5" x 2.2" inches
- RMS Power @ 4 Ohms: 60 Watts x 4 + 200 Watts x 1
- RMS Power @ 2 Ohms: 90 Watt x 4 + 300 Watts x 1
- 4-Way Built-in Protection Circuitry: Thermal, Voltage, Speaker, DC
- LPF/HPF/Bass Boost Controls
- With Bluetooth 5.0 and 3.5mm AUX audio input, achieving more stable and faster transmission. Compatible with most common audio device such as iPod, Phone, MP3, computer, TV, CD players, or Streaming Media...
- Adopting 2PCS classical TPA3116D2 chip with AM interference suppression function, max output power can reach 100W*2, easily to drive most home desktop/bookshelf/floor-standing speakers.
- Adding filter and red ring inductance, the sound is clear, sweet, mellow and full, no pop sound when skipping or pausing songs, and no audible noise even at high power output.
- Mini size and higher playability, easy to assemble and install. With protective case, reverse connection / over-voltage / under-voltage and over-heat / short-circuit protection. Its wide working voltage DC...
- Built-in Bluetooth for Wireless Music Streaming (Works with All Your Favorite Devices)
- 4 X 250W + 1 X 650W RMS @ 4 Ohms - 2 Ohm Stereo Stable - Bass Boost Circuitry - Chrome RCA inputs
- 4 X 350W + 1 X 1,500W RMS @ 2 Ohms - Stereo Line Outputs for L/R Channels - Low & High Pass Filter Controls
- 2 X 1,000W MAX @ 4 Ohms Bridged - (Bridgeable @ 4 Ohms Mono) - Fuse: 30A X 3 - Soft Turn On/Turn Off
- MOSFET POWER SUPPLY: A MOSFET is a type of electrical switch that permits current to flow through it. It precisely controls the output voltage and current by eliminating all secondary feedback circuitry...
- FLEXIBLE FULL RANGE: You can use Full Range amplifier to power not just your speakers but also your subwoofers. The gain control isn't used to change the volume. It simply regulates the quantity signal...
- CLEVER AND COOL DESIGN: The power and protection LED indications, gentle turn-on/off, and thermal, overload, and speaker-short protection are all included in this audio amplifier's 6 channel safety...
- POWERED WITH BLUETOOTH: You'll be able to wirelessly stream audio from any Bluetooth device thanks to the built-in Bluetooth. Stream your favorite songs directly from your smartphone or tablet, or from...
Last update on 2024-08-01 / Images Source Amazon Product API
Post Related to Car Stereo Amplifier 5-Channel in Bloomington, IN.
How Good are Kinetik Batteries?
Kinetik started its journey with two men trying to build professional systems in a car garage. It was their love for music, sound production, [...]
Do Aftermarket Stereos Void Vehicle’s Warranty?
After reading more than one article and dozens of erroneous responses at quora.com, I felt compelled to write this blog and address the [...]
Is Skar a Good Car Audio Brand?
If you are into car stereo, you just can't ignore Skar Audio. Although this is a relatively young company, since launching its first [...]
DSP For Your Car Stereo System
After acquiring my new GMC Denali, I have to admit that I was extremely disappointed and frustrated with the way the factory car stereo system sounded. I found out that I was not alone when looking online for solutions. It appears that many of the so-called “premium” factory sound systems lack not only features but often had serious limitations in the sound quality department.
Since high school, I have always been a fan of Alpine car stereo products, and when looking to upgrade my GMC Denali, I was almost sure I wanted to have an Alpine head unit. The advantage of having an Alpine radio is that you can always integrate with their PXA-H800, a digital DSP and graphic equalizer guarantee to fix any acoustic problems with a car audio system.
When Alpine designed the PXA-H800 digital sound processor they had one goal in mind: to deliver pristine sound to aftermarket amps, speakers, and subs. The unit stays in complete control over your sound system and manages the way it sounds before you send the signal to the amplifier. Unlike other DSP boxes on the market which rely on a bus network cable and can only be controlled via an aftermarket head unit of the same brand the Alpine PXA-H800 also features line-level inputs allowing it to be inserted behind any factory OEM car stereo.
After hearing about the new Clarion Z3, my plans for an all Alpine got completely sidetracked. So happens that Clarion has managed to develop a 100% digital car audio system before anybody including Alpine. The new system consists of a DSP module called the Z3 (the brains of the system), a pair of balance aluminum dome tweeters, capable of playing north of 50,000 Hz, two 6 1/2 inch midbass drivers (model number Z7), and a 10-inch server control 100% digital subwoofer (model Z25W).
At first glance, it appears that all Clarion did was move the amplifier to the speakers but if one takes a second, look there are no heatsinks on the speaker modules, and there is like an 18 gauge cable going to the speakers. Believe it or not, that is all that is needed. The Clarion Z3 system uses a technology consisting of LSI chip technology and the signal feed to them is a mixture of digital and voltage. Each of the speakers has six super-efficient voice coils. I read somewhere this system is rated at around 10-15 watts RMS, but if you listen to it, it sounds louder than your average 100-watt amplifier. The actual revolutionary part of this system is its control. This system is completely adjusted via a SmartPhone app available for both Android and iPhone.
The level of customization of this system puts every else on the market to shame. Ideally, you want to use the Clarion NX706 Audiophile Grade Automotive Head Unit because the NX706 is the only head unit in the market today with a fiber optic line out. In case you don’t want to go there, you can always connect your factory head unit via its high-level inputs.
If you are looking for a real audiophile quality sound system in a car before you go anywhere else take a look at the Clarion Z3 system at Thunder Electronics your car audio headquarters.
Popular Searches Related to Car Stereo Amplifier 5-Channel in Bloomington, IN.
There is no doubt that when looking for Car Stereo Amplifier 5-Channel in Bloomington, IN you have many options. Although, car manufactuerer’s like Jaguar are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your car, and we‘re confident that you can find a professional car stereo installation place Bloomington, IN that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car audio in or near Bloomington, IN. From Car Stereo Double DIN & Backup Cam to Bandpass Subwoofer Boxes we got you covered. It is often said that music is the best medicine there is and at ThunderEletronics.Net we want to be your first choice when searching for Car Stereo Amplifier 5-Channel in Bloomington, IN!