Car Audio Amplifier Monoblock Euless, TX2024-01-25T10:23:39-04:00

Car Audio Amplifier Monoblock in Euless, TX

Stereo Sales | Car Audio Sales & Installation

If you are seeking Car Audio Amplifier Monoblock in Euless, TX, you need to consider our car audio store. One of the reasons many audio enthusiasts stop by our website every year searching for things like car stereo on amazon is not because we are the largest but because DIY car audio enthusiast knowt that our car audio store offers a broad selection of amplifiers, car stereo receivers, changers, digital media receivers, equalizers, satellite radio, speakers, and subwoofers with FREE shipping.

Whether you are searching for Car Audio Amplifier Monoblock Euless, TX or Car Audio Capacitor we are confident you’ll find our variety adequate. That is because we put a lot of effort selecting the products we sell so that you have the easiest car audio installation experience and top rated car audio system you will love and your friends would want to purchase. So, tell all your friends for Car Audio Amplifier Monoblock in Euless, TX visit Thunder Eletronics for great prices and lastest technology for Car Audio Amplifier Monoblock in Euless, TX or Better Car Stereo Single DIN we are sure you will happy with the options at Thunder Electronics. For the best prices on 12-inch car subwoofer and quick expedited shipping, and no six for a nine games you can count on Thunder Electronics

Best Selling Car Audio Amplifier Monoblock Near Euless, TX

SaleBestseller No. 1
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote
249 Reviews
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote...
  • Blaupunkt 1500 Watt Monoblock Amplifier
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
  • Total Harmonic Distortion:
Bestseller No. 2
Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo
85 Reviews
Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo...
  • Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
  • To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
Bestseller No. 3
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W...
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
SaleBestseller No. 4
Blaupunkt AMP3000D AMP3000D 3,000-Watt-Max Monoblock Class D Amp...
  • 3,000 watts x 1 channel max power output
  • 198 watts RMS x 1 channel at 4 ohms
  • 396 watts RMS x 1 channel at 2 ohms
  • Designed to power vehicle subwoofer
Bestseller No. 5
Alpine S-A60M S-Series Class D Mono Amplifier
370 Reviews
Alpine S-A60M S-Series Class D Mono Amplifier...
  • 330 watts RMS x 14 ohms
  • preamp and speaker-level inputs
  • variable bass boost
  • The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
SaleBestseller No. 6
Blaupunkt AMP4000D AMP4000D 4,000-Watt-Max Monoblock Class D Amp with Bass Remote
207 Reviews
Blaupunkt AMP4000D AMP4000D 4,000-Watt-Max Monoblock Class D Amp with Bass Remote...
  • 4,000 watts x 1 channel max power output
  • 2,800 watts RMS x 1 channel at 1 ohm
  • 2,000 watts RMS x 1 channel at 2 ohms
  • 1,000 watts RMS x 1 channel at 4 ohms
SaleBestseller No. 7
BOSS Audio Systems R1100M Monoblock Car Amplifier - 1100 High Output, 2-8 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, MOSFET Power Supply...
  • DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
  • SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
  • INPUTS/OUTPUTS: RCA & Speaker Level Inputs
Bestseller No. 8
Crunch Ground Pounder GP-3500.1D 3500 Watt Monoblock Amplifier
106 Reviews
Crunch Ground Pounder GP-3500.1D 3500 Watt Monoblock Amplifier...
  • 1 channel x 3,500 watts @ 1 ohm
  • 1 channel x 1,750 watts @ 2 ohms
  • 1 channel x 875 watts @ 4 ohms
  • Operates in mono mode only
SaleBestseller No. 9
STINGER Audio MT15001 Monoblock 1500 Watt RMS Car Audio Subwoofer Amplifier with Remote Subwoofer Level Control Bass Knob, Class D, Hexfet Mosfet, Subsonic Filter, Low-Pass Filter, Bass Boost Q
65 Reviews
STINGER Audio MT15001 Monoblock 1500 Watt RMS Car Audio Subwoofer Amplifier with Remote Subwoofer Level Control Bass Knob, Class D, Hexfet Mosfet, Subsonic Filter, Low-Pass Filter, Bass Boost Q...
  • Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
  • Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
  • Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
  • Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Bestseller No. 10
BLAUPUNKT 1501PRO Car Audio Monoblock 1 Channel 2 Ohm Stable Amp Amplifier 1500 Watts Max | Slim and Compact...
  • Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
  • Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
  • High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Bestseller No. 11
Car Audio Amplifier ZE500.1 1000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo...
  • Power - 1000 Watts MAX x 1 @1-Ohm, 500 Watts RMS x 1 @1-Ohm, 350 Watts RMS x 1 @2-Ohms,200 Watts RMS x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
  • To keep both your car and the stereo amp safe, this ZE500.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
Bestseller No. 13
Orion Cobalt CBA2000.1D Monoblock 1-Channel Class D Amplifier for Car Subwoofer, 2000W, 2/4 Ohm Stable, Adjustable Low Pass & Subsonic Filter with Bass Boost, MOSFET Power Supply, Bass Knob Included
40 Reviews
Orion Cobalt CBA2000.1D Monoblock 1-Channel Class D Amplifier for Car Subwoofer, 2000W, 2/4 Ohm Stable, Adjustable Low Pass & Subsonic Filter with Bass Boost, MOSFET Power Supply, Bass Knob Included...
  • This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono...
  • This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is...
  • The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is...
  • The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
Bestseller No. 14
Taramps HD 3000 1 Ohm 1 Channel 3000 Watts RMS MAX, Full Range Car Audio, Monoblock, LED Monitor Indicator, Class D Amplifier, Crossover, White 3k amp
301 Reviews
Taramps HD 3000 1 Ohm 1 Channel 3000 Watts RMS MAX, Full Range Car Audio, Monoblock, LED Monitor Indicator, Class D Amplifier, Crossover, White 3k amp...
  • The HD line offers Monoblock amplifiers that operate at 1, 2, or 4 Ohms, making them perfect for a variety of setups, from subwoofers to tweeters.
  • The Taramps HD 3000 delivers 3000 Watts RMS. This monoblock amp offers exceptional flexibility and now includes compatibility with Monitor Level Remote.
  • The Positive/Negative Power Cable is 4 AWG | The Output Cables Wire Gauge is 9 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 150A.
  • Perfect for various car audio setups, this perfect amplifier comes equipped with a Crossover, Input/Output settings and a precise Level Control.
Bestseller No. 15
Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier
595 Reviews
Skar Audio RP-800.1DM 800 Watt Monoblock Class D Marine Subwoofer Amplifier...
  • Marine Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
  • Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
Bestseller No. 16
Amplifier car Audio Monoblock Class D Compact Subwoofer Amplifier, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply...
  • Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
  • 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
Bestseller No. 17
Planet Audio PL2000.1M Monoblock Car Amplifier - 2000 High Output, Low/High Level Inputs, Low Pass Crossover, MOSFET, Hook Up to Subwoofer for Bass...
  • Power - 2000 Max x 1 @2 Ohms, 1000 Max x 1 @4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
SaleBestseller No. 18
OceanAudio OAE-170.1 Car Audio Subwoofer Amplifier - Monoblock, Class A/B, 2/4 Ohm Stable, Mosfet Power Supply Max Power 340W...
  • 2Ω stable; PWM MOSFET Power supply
  • RCA and speaker level inputs
  • Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
  • Full range or LPF mode switch
Bestseller No. 20
STINGER Audio MT20001 Monoblock 2000 Watt RMS Car Audio Subwoofer Amplifier with Remote Subwoofer Level Control Bass Knob, Class D, Hexfet Mosfet, Subsonic Filter, Low-Pass Filter, Bass Boost Q
179 Reviews
STINGER Audio MT20001 Monoblock 2000 Watt RMS Car Audio Subwoofer Amplifier with Remote Subwoofer Level Control Bass Knob, Class D, Hexfet Mosfet, Subsonic Filter, Low-Pass Filter, Bass Boost Q...
  • Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
  • Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
  • Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
  • Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.

Last update on 2024-12-18 / Images Source Amazon Product API

Article Related to Car Audio Amplifier Monoblock in Euless, TX.

FOR SALE - Chevy Silverado Audio Systems & Electronics

How Can I Improve The Sound In My Car?

How to Improve your Car Stereo System

It is 2022, and nowadays, we can choose from a wide range of electric cars and even self-driving cars. Nevertheless, the sound system of many vehicles today is still is not great. Sure, many late-model vehicles have component speakers and information head units, but as a whole, with no exceptions, the sound quality is elementary to mediocre. And what about cars with premium stereo systems like Bang & Olufsen, Harman Kardon, and Bose, well to that, I say, have you listened to them? And because I know somebody is going to say, how about the 2022 Acura MDX, which features a 25-speaker “Signature Edition” ELS Studio 3D premium audio system with more than 1,000 watts of power! To that, I once again say, have you listened to it? Please know that the 2022 Acura MDX splits its 1000 watts of power into  22 discrete channels or about 45 watts per channel. Six of those channels are used for mini speakers embedded in the headliner. Although I have not measured it, it is safe to say that the Acura MDX audio system would struggle to reach 100 dbs. The system also uses heavy DSP processing with multiple simulation modes, which goes against every grain of an audiophile car stereo system.

Then there is the matter of cost! For a fraction of the cost of what many premium sound systems are demanding, you can upgrade your basic factory stereo system using aftermarket equipment and have money left.

How to Improve your Car Audio System?

The Head Unit: The first thing we need to look at is features. Does your basic OEM head unit has all the features you are seeking? If your factory radion does not have Apple Car Play, Android Auto, Rearview camera, or Bluetooth for hands-free calling, you need to consider upgrading or changing the OEM unit. Another feature that is starting to catch traction once again is satellite radio, although if you have Apple Car Play or Android Auto in some cases, you can get around this by using an APP. And no, changing your factory radio does not void your warranty, as long as it is installed correctly.

The Speakers: If your vehicle’s head unit meets your requirement from a feature standpoint, the next logical step is to upgrade your factory speakers. You need to be honest with yourself and clear about your expectations and budget when doing this. You don’t want to buy aftermarket speakers that would have to be upgraded if you install an amp later. You also don’t want to blow your entire car stereo system budget on speakers like Morel or Focal and not have any money left for an amplifier and subwoofer.

The Amplifier: With all of your factory speakers upgraded, we need to talk about power, and by powered, I mean amplification power. Despite popular belief, you don’t need 1000 watt amplifiers to have an excellent sounding car audio system. We also need to keep the electrical supply capabilities of the vehicle in mind. The electrical system in means of battery and alternator of a basic Honda Civic, Toyota Tercel, and or Nissan Sentra is going to struggle to keep up with a car stereo system requiring more the 50 amps of current. Nevertheless, you have many options with today’s very affordable and efficient Class-D Amplifiers. But if you are on a budget, your best bet is to look for a 4-channel amplifier with at least 100 watts per channel of RMS power and bass level control! Why four-channel if, in theory, most car stereo systems have at least five? Studies have shown that 99.9% of drivers don’t use the fader feature in their car radios. So, if front to rear fader is not on your list of required features, consider buying a Class-D 4-channel amplifier with built-in crossover and bass control. An amp like this will allow you to run the front and rear speaker parallel on channels one and two and bridge channels three and four to a subwoofer. In this configuration, your amplifier will be running a 2-Ohm load, the desired load for a Class-D amp.

The Subwoofer: If the Class-D 4-channel amplifier running is in 3-channel mode sounds attractive to you, the impedance of your subwoofer has to keep in check! It is best to run no more than a 4-ohm load when an amp is bridged. That does not mean you have to give up bass or SPL! Two 12 Inch DVC subwoofers with 4-Ohm coils running in series/parallel will, without a dought, give nice tight bass without overheating your amplifier or stressing your car’s electrical system. However, budget permitting, consider a Class-D 5-channel amplifier with bass control. That will give you front-to-read fade control and independent subwoofer level control. Here are some recommendations.

Popular Links Related to Car Audio Amplifier Monoblock in Euless, TX.

Without a question that if searching for Car Audio Amplifier Monoblock in Euless, TX you have many options. Even though, car manufactuerer’s like Honda are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your vehicle, and we‘re confident that you can find a professional car stereo installation shop Euless, TX that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car stereo in or near Euless, TX. From Car Stereo Amplifier 4-Channel to Car Audio Speaker 6X9 we have what you are looking for. Many will tell you that music is life and at Thunder Eletronics we want to be your go-to if looking for Car Audio Amplifier Monoblock in Euless, TX.