Car Audio Amplifier Monoblock in Auburn, AL
When you are seeking Car Audio Amplifier Monoblock in Auburn, AL, you should consider our car audio store. One of the reasons a lot of audio enthusiasts visit electronics.net every year searching for things like car audio fabrication is not because we are the most popular but because DIY car stereo enthusiast knowt that Thunder Eletronics offers a wide selection of amplifiers, car stereo receivers, changers, digital media receivers, equalizers, satellite radio, speakers, and subwoofers plus great prices.
Don’t matter if you are searching for Car Audio Amplifier Monoblock Auburn, AL or Car Audio Speakers 4X6, 5X7, & 6X8 we are confident you’ll find our variety adequate. That is because at ThunderEletronics.Net we put a lot of effort researching the products we sell so that you have the easiest car stereo installation experience and a competition ready car audio system you can be proud of and your friends would want to purchase. So, tell all your friends for Car Audio Amplifier Monoblock in Auburn, AL visit Thunder Eletronics for great prices and up to date for Car Audio Amplifier Monoblock in Auburn, AL or 15-Inch Car Subwoofer we’re sure you’ll happy with the seletion at our website. For the best prices on dash camera for car and fast expedited shipping, and misleading advertising you can count on Thunder Electronics…
Best Selling Car Audio Amplifier Monoblock Near Auburn, AL
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- By Orion High Performance Car Audio
- CBT4500.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
- Watts @ 1 Ohm Mono 14.4V: 1200W
- Max Music Peak Power: 4500W
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining...
- Small Footprint and Sturdy Design: Made it precision metal potentiometer for precise tuning and sturdy construction.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- MOSFET POWER SUPPLY: This powerful amplifier is outfitted with metal oxide semiconductor field-effect transistors that allow it to quickly switch from full to non-conduction operation for high efficiency...
- MAX POWER OUTPUT: 3000 watts into a single channel at 2 ohms. Maximum power output of 1250 watts into a single channel at 4 ohms. This amplifier is intended to power your subwoofer(s), giving them the...
- SLIM SIZE DESIGN: This amplifier has a slim design that makes it very convenient. It comes complete with all necessary mounting hardware for easy installation. This is very portable and lightweight to...
- VARIABLE BASS BOOST: Variable bass boost makes it easy to customize the low bass within the boost range to your preferences. Enhanced audio and bass, easy to use with user friendly controls. Reliable with...
- Ultra Compact MOSFET Monoblock Class D Car Amplifier
- RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
- Frequency Response: 15Hz - 270Hz
- Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
- PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
- MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
- SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
- Power: 1 Channel Monoblock amplifier delivers 5000 watts max power to a single channel. No need to bridge, this is done internally in this car amplifier. 2000 watts of RMS power to your subwoofers.
- Strapable Operation: You can double the load by strapping 2 of these monoblock amplifiers to double your power output. These amps are durable and built to deliver monster power to your speakers.
- Build Specs: The OD1-5000D is built with a Military Grade PCB and with a PWM mosfet power supply. This amp also comes with direct short, thermal, & overload circuit protection to make sure your amplifier...
- In the Box: In the mono amp packaging you will find mounting brackets, a manual, bass knob and cable and of course a monster of an amplifier. Power Acoustik recommends professional installation and solid...
- Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Last update on 2024-07-31 / Images Source Amazon Product API
Blog Related to Car Audio Amplifier Monoblock in Auburn, AL.
GMC & Chevy Truck Audio Systems Upgrade
If you commute to work, getting stuck in traffic at some point in time is almost unavoidable. As a matter of fact, [...]
BOSE Speakers SUCK! That’s Why Audiophiles Hate Them!
Before I got heavy into audio, or should I say, before I knew what audio was, I spent a lot of time at places [...]
Blaupunkt Car Stereo Amplifiers
As of late, we have started to see a lot more Blaupunkt car amps, speakers, and subwoofers online and at Walmart [...]
Is BOSE the Best Sound System for Cars?
When BOSE was made, it wasn’t just about making a quick buck and cashing out. It was about innovation and forming a community of real audiophiles who wanted to enjoy the best possible sounds. They are a well-known speaker company providing its listeners with immersive and enjoyable sounds. Their main aim is to make music sound like it was made just a few centimeters from them.
So, since we already know BOSE makes good speakers, how about their car speakers? Does it fit with everything that BOSE stands for, or is there still more that can be done? In this article, we will look at everything that BOSE car speakers can do for you, their features, and their drawbacks.
Features
BOSE car speakers are wonderful because they use active sound management and advanced sound tech to mask the sound of the vehicle. It does this by using harmonic cancellation to hide the engine sound. This is to improve your listening experience to the max and produce a very good sound quality. This doesn’t stop here, as further improvements are made to the sound quality of this music produced from the stereo itself.
The advanced sound technology that was mentioned earlier also helps the BOSE car speakers produce sounds that are more realistic to listeners. The BOSE car speakers are also power efficient, thus putting less strain on your car’s engine. The speakers are also placed strategically to ensure that the way the sound is reproduced creates a powerful musical experience. This is why they have created algorithms, software, and components specially for cars. They work hand-in-hand with the automotive manufacturers of these cars to make this a reality.
The BOSE QuietComfort Road Noise Control also finds a way to cancel out sounds created by issues such as poor road conditions and changes in engine lifespan. Additionally, the speakers work in such a way that a limited amount of power is taken from the engine.
All these features are in line with the main vision of BOSE industries which is all about creating experiences rather than just listening to music. This is shown in the investment of BOSE in research about the way our brains process sounds.
Drawbacks
As wonderful as these speakers are, they do have their drawbacks. One of the major drawbacks is that because of the perfected immersive experience they’re trying to create; their sound can be inauthentic. This will be an issue for serious audiophiles.
Additionally, BOSE speakers are tailor-made for your car. This way, you can’t make minor adjustments to the system without totally upgrading or changing it. This can be an issue if you want to only make a minor change.
Also, because these are custom-designed BOSE speakers, you will spend a lot. The special technologies for these speakers do not come cheap at all. From the speaker to the accessories to the installation and upgrades can be very expensive.
Conclusion
After all, is said and done, BOSE is still one of the best car speakers out there. This is because it is created to optimize sound from cars, specifically.
Popular Searches Related to Car Audio Amplifier Monoblock in Auburn, AL.
There is no doubt that when searching for Car Audio Amplifier Monoblock in Auburn, AL you have many options. Although, car manufactuerer’s like Bentley Motors are making a lot more difficult to install aftermarket car audio you can still have bass in your car, and we are positive that you can find a local car audio installation store Auburn, AL that it up to the task. We want to help you in this process be providing you the best deals on car stereo in or near Auburn, AL. From Dash Camera Installation to 8-Inch Car Subwoofer we have what you are looking for. It is often said that music is the best medicine there is and at ThunderEletronics.Net we want to be your go-to when searching for Car Audio Amplifier Monoblock in Auburn, AL!