Car Amplifier Sale in Harrisonburg, VA
If you’re looking Car Amplifier Sale in Harrisonburg, VA, you need to consider our car audio store. One of the reasons many car audio enthusiasts visit our site every day searching for things like car stereo with bluetooth is not because we are the largest but because car audio enthusiast into DIY car stereo installation knowt that Thunder Eletronics offers a broad selection of car audio and eletrconics plus great prices.
Whether you’re looking for Car Amplifier Sale Harrisonburg, VA or Car Audio Capacitor we know you’ll find our offerings fulfilling. That is because at Thunder Eletronics we go to great lengths cooshing the products we sell so that you have the easiest car stereo installation experience and a top of the line car audio system you will be happy with and your friends would want to purchase. So, tell all your friends for Car Amplifier Sale in Harrisonburg, VA check out Thunder Eletronics for great prices and lastest technology for Car Amplifier Sale in Harrisonburg, VA or Car Audio Fabrication we’re sure you’ll satisfied with the variety at Thunder Electronics. For the best prices on preloaded subwoofer boxes and fast expedited shipping, and misleading advertising you can count on Thunder Electronics!
Best Selling Car Amplifier Sale Near Harrisonburg, VA
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 4 channels x 375 watts @ 2 ohms
- 4 channels x 185 watts @ 4 ohms
- 2 channels x 750 watts (mono bridged) @ 4 ohms
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 2000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system; Gives you up to 2000W bridgeable output; Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss; The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience;...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection; Has been specially designed from the bottom up to provide safe...
- 2 Ohm Stable Operation & Soft Turn On Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Remote Turn-On / Turn-Off Circuit
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x...
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4...
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB...
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry....
- 🏝️【Compatible for】Fits for all of aftermarket Car Stereo receiver with Android system.
- 🏝️【Easy installation】Just plug and play on your Android Car Stereo receiver. No need complex connection, you can get clear and pleasant high-quality sound from this digital amplifier for cars
- 🏝️【Three volumn modulation】:Adjust the sound effect to the appropriate level based on your car audio receiver by button "Bass",MID","HIGH", you can get 5x improvement in sound power with this...
- 🏝️【Amplify Weak Signals】Android car stereo amplifier can boosts the weak signals from your audio source or pre-amplifier without compromising the audio quality, resulting in enhanced sound...
- 4000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use...
- The Taramps DS line has Multichannel amplifiers, which are Full Range amplifiers with 2 or 4 channels, and also features high power and cost-benefit.
- The DS 440x4 has 440 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multi-channel amplifier features 4 channels with 110 Watts RMS each (440 watts RMS total) and also with high-level input and automatic activation.
- The Positive/Negative Power Cable is 9 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 50A.
- 4-Channel Class A/B Amp - Upgrade your car audio with a 4-channel amp for clearer sound. Customize your sound by connecting various speakers, balance audio between front and rear, and even add a subwoofer...
- Maximum Power Output – Power up your music. The GM-A6704 cranks out an impressive 1,000 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 4 at 4 ohms (190...
- Efficiency – The Pioneer GM-A6704 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- Digital Amplifier Technology
- Speaker Level Input w/ Signal Sensing Turn-on
- 2 Ohms Load Capability. High Pass Filter : 50Hz-200Hz, -12dB/oct (A/B)
- Power MOS-FET Switching Power Supply
Last update on 2024-12-06 / Images Source Amazon Product API
Blog Post Related to Car Amplifier Sale in Harrisonburg, VA.
How do I know what speakers to get for my car?
People always ask, How do I know what speakers to get for my car? The car audio experience has evolved significantly over [...]
Beginners Guide To Car Audio Systems
There's nothing like good music on a cool day while driving your car. Music can improve your day, and it is suitable for [...]
A Comprehensive Guide: Choosing Car Speakers
Introduction People always ask, How do I know what speakers to get for my car? The car audio experience has evolved significantly [...]
Clarion DSP a Full Digital Sound system
The car audio industry is a constantly changing tech environment, and to be honest, I am not as into car audio as I used to. Clarion was an okay brand back in the day but never an over-the-top leader in technology. While looking for pricing on getting my windows tinted at several audio shops near me, I kept running into Clarion products, some of which are pretty techie and advanced for a brand of such low profile.
One of the most amazing models is the Clarion’s NX706 navigation receiver. Not only does it have a huge and colorful 7-inch touchscreen, but the fact that it has very few buttons around makes it look even bigger. The built-in navigation software powered by iGo Primo gives those with entry-level vehicle navigation maps for most of North America, including Canada as well as Puerto Rico. Unlike cell phone-based navigation be iGo Primo system has over 11 million points of interest, along with 3D mapping that allows realistic views of the terrain you are driving, including buildings and landmarks for many metropolitan areas.
Digital Sound system
Things got pretty interesting when the salesperson approached me and labeled this head unit an audiophile-quality piece! I said to myself this guy is just trying to sell me a radio. He went on to explain that the Clarion NX706 is one of the few head units in the market with a digital optical output. He also explained that you can now build an entire 100% digital sound system with Clarion products.
The way it will work is with the Clarion NX706 as the foundation or a piece and the addition of Clarion’s other digital lineup consisting of a DSP module, self-powered tweeters, self-powered 6 1/2, as well as a self-power 10-inch subwoofer. I said wait a minute. If they are self-powered, they’re not digital. Somewhere along the line, you have to add an amplifier. At this point, I must have looked pretty dumb because the guy looked at me and smiled. He asked to give him a minute as he went to the back and pulled out some literature on the Clarion Z-System.
As he opened the literature, he explained that they are no analog amplifiers but rather a concept developed by Intel called large-scale integration or LSI chip. Each of the six speakers has one of these chips, along with an extremely efficient six-voice coil motor. Furthermore, he went on to show that the only thing connecting the speakers to the DSP module is a twisted 18-gauge cable. Each of the five speakers in the system uses a 100% digital signal to modulate the power supply voltage, which drives the speakers. In effect, the same twisted pair of cables carry the DC voltage along with the digital information. The digital signal is combined directly with the voltage by the LSI chip, and it drives the speaker.
Trending Searches Related to Car Amplifier Sale in Harrisonburg, VA.
There is no doubt that if searching for Car Amplifier Sale in Harrisonburg, VA you have many options. Even though, car manufactuerer’s like Polestar are making a lot more difficult to upgrade your car stereo you can still have a better than OEM car audio system in your car, and we are sure that you can find a local car stereo installation place Harrisonburg, VA that it up to the task. We want to help you in this process be offering you the best deals on car stereo in or near Harrisonburg, VA. From Car Stereo Double DIN to Car Audio Capacitor we got you covered. Many will tell you that music is the best medicine there is and at Thunder Eletronics we want to be your first choice if looking for Car Amplifier Sale in Harrisonburg, VA…