Car Audio Tweeters in Macon-Bibb County, GA
If you’re looking Car Audio Tweeters in Macon-Bibb County, GA, you have to consider our car audio store. One of the reasons many car stereo enthusiasts stop by our website every day searching for things like car stereo bluetooth is not because we are the biggest but because car stereo enthusiast into DIY car audio installation knowt that our car audio store offers a broad selection of stereos, speakers, subs, and amps plus great prices.
Whether you’re searching for Car Audio Tweeters Macon-Bibb County, GA or 8-Inch Car Subwoofer Box we know you’ll find our selection adequate. That is because at Thunder Eletronics we go to great lengths cooshing the products we sell so that you have the easiest car stereo installation experience and a competition ready car audio system you will be happy with and your friends would want to purchase. So, tell all your friends for Car Audio Tweeters in Macon-Bibb County, GA check out Thunder Eletronics for great prices and latest selection for Car Audio Tweeters in Macon-Bibb County, GA or Car Sound Deadening we are sure you will happy with the inventory at our website. For the best selection on car audio equalizer and quick expedited shipping, and no six for a nine games you can count on ThunderElectronics.Net!
Best Selling Car Audio Tweeters Near Macon-Bibb County, GA
- High-Performance Component Tweeter System - 2 Tweeters Included
- Max Power: 240 Watts (pair) | RMS Power: 80 Watts (pair)
- Powerful Neodymium Magnet | Sensitivity: 92 dB
- Premium Silk Dome Design Allows For Extreme Sound Clarity | Frequency Response: 2.0 KHz - 20 KHz
- 20mm polyimide (PI) hard dome tweeter
- Included multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
- Inline high-pass network for simple installation
- 3.5-inch High Compression Titanium Bullet Super Tweeters
- Max Power: 500 Watts
- RMS Power: 300 Watts
- The Max power rating, for each tweeter is 250 Watts, for a total of 500 Watts.
- The Prime R1T-S is a 1” tweeter kit featuring a 0.5” voice coil and mylar dome, allowing you to easily add on additional highs with natural sound reproduction
- The R1T-S 4-Ohm black tweeters come as a pair, with a power handling of 40 Watts RMS/80 Watts Max and include integrated high-pass crossovers
- This low distortion material allows accurate reproduction of high frequencies for an open sound stage
- Multiple tweeter mounting configurations allows for you to choose between flush, surface and angle configurations (Tweeter Mounting Depth: 0.76" Flush Mount / 1.06" Surface-Angle Mount
- High Performance 1-inch Aluminum Dome Component Tweeters with Silk Edge
- Peak Power: 320 Watts (Pair) | RMS Power: 80 Watts (pair)
- Sensitivity: 92 dB, Impedance: 4 Ohms
- Sold as a Pair - Includes x2 Tweeters and x2 Crossovers
- 1.8-inch High Compression Aluminum Bullet Super Tweeters
- Max Power: 400 Watts (Pair)
- RMS Power: 200 Watts (Pair)
- Frequency Response: 3.0 kHz - 20 kHz | Sensitivity: 100dB
- 1-3/8" Silk Dome Component Tweeters - 2 Pairs
- HIGH PERFORMANCE - 500 Watts, 4 Ohm Mini Tweeter Piezo Electric Super high frequency
- SOLID STRUCTURE – These Dome Tweeters are made of high quality material that provides long lasting play in any environment!
- ALL YOU NEED TO MOUNT – Flush or surface mount. Surface mounting with a double-faced adhesive tape for simple, quick, effective mounting anywhere in the vehicle.
- Dome Component Tweeter - Elevate your car audio with this high-frequency speaker. Its dome diaphragm ensures wide sound dispersion, delivering crystal-clear and precise sound reproduction.
- Power Handling - Maximum power handling of 450 watts and a continuous power handling of 100 watts, this speaker delivers dynamic sound. Experience crisp, high notes with clarity and accuracy.
- Frequency Response – Tweeter car audio speaker contains a narrow, high audio frequency response for accurate sound reproduction, with a range of 1800 Hz to 58 kHz.
- Sensitivity - The sensitivity rating of 90 dB ensures that the speakers can produce clear and loud sound even with lower power inputs. This means you can enjoy your music without distortion, even at higher...
- CRYSTAL CLEAR HIGHS: These tweeters are capable of generating extremely loud volume you need to keep up in the high SPL environment
- BUILT IN CROSSOVER: A capacitor that eliminates out all low end frequencies that might otherwise harm the super tweeters
- SHALLOW PROFILE: Featuring a sleek PRO Audio faceplate design this high performance 3.75 inch round tweeters, only have 1.59 inches of mounting depth.
- Dimensions: 7 x 7 x 3 inches, Impedance: 4 ohms, Mounting Depth: 2.25 inches
- Mounting Hole: 5.63 inches, Item Weight: 3.55 Lbs. (pair), Frequency Response: 65 Hz to 20 KHz
- Sensitivity: 90 dB @ 1 watt/1 meter, Poly Injection Cone, Rubber Surround, Cast Basket
- 1 Inch Voice Coil, 0.75 inch Mylar Come Tweeter x 2, 1.25 inch Mylar Cone Midrange
- Speaker type: tweeters for car audio, Impedance per speaker: 4 Ohm, Power per tweeter: 25W RMS | 50W MAX, Power per tweeter set: 50W RMS | 100W MAX
- 25 mm silk-dome tweeters that feature a CCAW voice coil and neo magnet which allow the car tweeters to recreate vocals and other high frequencies like never heard before
- Custom engineered 1 inch tweeters that feature a voice coil suspended in ferrofluid which provide an accurate reproduction of your favorite tracks
- The tweeters for car audio are housed in a brushed aluminum flush mount bracket to keep your ride looking sharp
- ULTRA SLIM: Not only does this driver look as good as it sounds these bullet tweeters are easy to mount on you car door or anywhere!! The TW350Ti-4 SLIM is a small tweeters speakers for car with a mounting...
- DESIGNED FOR EFFICIENCY: Add crystal clear sparkle to any speaker with PRV Audio’s TW350Ti-4 SLIM titanium bullet tweeter! These super tweeters for car audio offers a smooth response and extremely high...
- LIGHTWEIGHT & DURABLE: This 3.5 inch twiter is built with a titanium diaphragm on a light, thin, and durable Kapton former for long play applications. Weighing only 1.14 pounds each tweeter
- SOLID STRUCTURE: A titanium super bullet tweeter designed with cast aluminum frame to ensure a quality sound and long lasting play in most environment.
- 1.75” Single 4-Ohm Super Tweeters | Sold as a Pair
- Power Per Tweeter: 120W RMS | 240W MAX
- Power Per Pair: 240W RMS | 480W MAX
- Sensitivity: 104 dB | Frequency Response: 3 kHz - 20 kHz
- TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look
- POWER YOU CAN COUNT ON - PRO-TW120B ferrite tweeter delivers out-of-this-world power, at 120 watts RMS and 240 watts Max at 4 ohms with build in capacitor filter
- HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies
- TAKE YOUR SYSTEM TO THE NEXT LEVEL - Get the most out of your system by upgrading to a super tweeter that gives you everything you're missing from your stock stereo. Discover what a high-end tweeter can do...
- HIGH EFFICIENCY - Loud and clear even when hooked up to your factory radio. 200 Watts Max - 50 Watts RMS
- ANGLE/FLUSH/SURFACE MOUNT - Multiple options INCLUDED IN THE BOX for ultra versatillity, can be installed in almost any ride. Mounting depth 0.71-in. Cutout Diameter 2-in.
- LOW IMPEDANCE - Four-ohms 0.5-in. KSV Coil speakers compensate for the undersized wires found in many of today's cars and make the most of every watt your car stereo can deliver
- MATERIAL & SIZE - 1.38" inches PEI Dome for lightweight, shape-retaining properties, and high-temperature handling. Ferrite Magnet made to handle high temperatures 80-250 C
- TOP OF THE LINE TWEETERS - Professional grade super tweeters that can handle high frequencies with ease. DS18 meticulously designed these tweeters to sound as good as they look.
- POWER YOU CAN COUNT ON - PRO-TWX1ferrite tweeter delivers out-of-this-world power, at 120 watts RMS and 240 watts Max at 4 ohms with build in capacitor filter.
- HIGH-QUALITY ALUMINUM FRAME AND DIAPHRAGM - If you like your highs crisp, bright, and loud, aluminum tweeters are exactly what you need. It's light, strong, and produces a bright sound at high frequencies.
- TAKE YOUR SYSTEM TO THE NEXT LEVEL - Get the most out of your system by upgrading to a super tweeter that gives you everything you're missing from your stock stereo. Discover what a high-end tweeter can do...
- Upgrade your vehicle or sound system with the new TW150SD-4 Soft Dome Tweeter pair, delivering remarkable clarity and exceptional response above 2Khz. Great small PRV tweeters.
- Experience ultra-high sensitivity of 94dB and a power handling of 240 Watts with the TW150SD-4 neodymium magnet 2 inch tweeters - dome tweeters for car audio.
- Easily installable in tight spaces with a shallow profile, the TW150SD-4 is a great drop-in upgrade to vehicles with standard 2" factory tweeters 2 inch.
- The built-in inline capacitor smooths down low frequencies, allowing for clean and detailed high frequencies.
- Elite TX Series Component Tweeter System - 2 Tweeters Included
- Peak Power Handling - 240 Watts (Pair) | RMS Power Handling - 120 Watts (Pair)
- Powerful Neodymium Magnet | Sensitivity: 93 dB
- Premium Silk Dome Design Allows For Extreme Sound Clarity | Frequency Response: 1.6 kHz - 20 kHz
- Recoil High Compression Bullet Super Tweeters are designed to generate extremely loud volume to keep up in the high SPL environment.
- Max Power: 400 Watts (Pair) | RMS Power: 200 Watts (Pair)
- The 1-Inch high temperature Kapton voice coil and aluminum diaphragm are engineered to take the power needed to keep up and maintain crystal clarity.
- Recoil super tweeters are designed with die cast aluminum frame to ensure a quality sound and long lasting play in most any environment.
Last update on 2024-07-31 / Images Source Amazon Product API
Blog Post Related to Car Audio Tweeters in Macon-Bibb County, GA.
Is Jensen a Good Car Audio Brand
The right automotive audio equipment is crucial for a pleasurable driving experience, whether commuting to work or on a road trip. Jensen may [...]
Revealing the Secrets Of a Good Car Speaker
As we spend more time in our cars, the importance of a high-quality audio system becomes increasingly apparent. Whether you're a music [...]
How are JBL Car Speakers?
If you are a real music lover, there's almost no way you have not heard of JBL speakers. They are some of the [...]
Precision Power Car Audio Amplifiers Still Any Good?
I was browsing around AMAZON during PRIME day. I was pleasantly surprised to find an ad and product by the renowned car audio amplifier – Precision Power or, as I grew up knowing it, PPI. After visiting the website, I learned that a marketing group now owns the company. As is often the case, when marketing companies such as Black & Decker acquire a brand like Delta, you can almost always see the end. That is because the goal is to milk the brand’s reputation is lowering the quality of the products, maintaining the pricing, and cashing in. The company denies this, and the website’s about us page states that its ” mission is to lift the brand’s image beyond consumer’s expectations.”
Furthermore, they are claiming that their engineering will set new standards for Car Audio” Well, that is still to be seen. I remain an optimist. I won my first car audio competition with a PPI AMP. To this day, I reminisce about that since I was pretty reluctant to use Precision Power Car Audio Amplifiers. Back in the day, they were known for extravagant designs consisting of odd shapes and loud multi-color graphics. Without a doubt, you knew it was a Precision Power Car Audio Amplifier by just looking at it!
The NEW Precision Power
A quick look at the company’s website [precisionpower.com] reveals it offers four product categories. These are Amplifiers, Subwoofers, Speakers, and Signal processors. Here is a quick look at the new lineup broken down by class and series.
Precision Power Amplifiers
The Precision Power Amplifier lineup for 2023 consists of four distinctive lines. Those are the PowerClass, ATOM Series, iON Series, and the Black Ice series.
The PowerClass – has the catch line “Vertical Stance, Innovative Generation” if that does not tell you anything, you need to know that these amps stand vertically! I am unsure about this from a practical point of view since it utilizes a standard PC board with output transistors on the two outer edges. In other words, the lower rail is transferring heat into the amp! Aside from mounting vertically, it is also wedge, with the top thinner than the bottom! Unless this thing sounds incredible, the design is incredibly impractical.
ATOM Series – Finest Class-D Performance & Reliability. According to the website, the ATOM amplifier series adopts the Class D performance, reliability, and footprint of the original ATOM and iOn platforms. The ATOM series is also available on marine models. The main external distinction is that one is black, while the marine series is a clear anodized aluminum finish. I like how these amps look. They have a distinctive high-end look and feel, and all the connectivity is on one side, which is very reminiscent of old-school SoundStrem.
iON Series – Unique Small Footprint, Packs Punch, the tag line for this iON series say it all! These highly efficient full-range amps employ Class D topology and SMT technology for an excellent size-to-power ratio. The fix 80hz crossover is a little disappointing but more than adequate for 90% of the applications.
Black Ice -Double-Sided PCB, BOLD Power. Reading through the description, one of the biggest takeaways from the Back Ice series is that they accept a balanced signal for the purest sound. Put that together with double-sided PC boards, surface mount technology, and over-compensated high headroom power supplies capable of producing more than conventional power gain. You have a recipe for an excellent sound car stereo amplifier.
Precision Power Subwoofers
The NEW Precision Power subwoofers come in two flavors, those are The ATOM Series and the Phantom Series. These car audio subwoofers offered outstanding performance and modern venting and were designed to cover a wide range of applications from SPL competition to SQ competition and everything in between.
Precision Power ATOM Series Subwoofers – You don’t have to be an expert to know that these subs are quite unique by just looking at them! Aside from the odd-looking fins on the cone, which are an extension of the cast aluminum dust cap and are designed to provide strength and rigidity to the cone while functioning as a heatsink to help absorb and dissipate heat directly from the voice coil. Other things are not quite as obvious, for example, dual poly-cotton suspension for the magnetic gap to help dampen violent accelerations and improve diaphragm alignment to the hot-forged one-piece t-yoke with center pole and back venting – According to Precession Power, venting into the yoke and backplate removed by convention transfer. Undoubtedly, a unique technological approach to car stereo subwoofer design.
Precision Power Phantom Series Subwoofers – Flat woven fiberglass composite cones are not new to PPI or the car audio industry in general. Still, what’s under the hood is impressive about the Precision Power Phantom Series Subwoofers. All Phantom subwoofers use a flat fiberglass stranding woven together for strength and rigidness. The sonic qualities of pulp paper backing have proven themselves worthy of any system, especially after a heavy soaking in epoxy resin. The specially formulated polyurethane foam surround is more commonly used in the manufacturing of industrial gasket and insulation products than speaker manufacturing because of its adhesive bonding properties. The polyurethane surround support extended excursion, strength, and flexibility during extreme movement.
Precision Power Speakers
The NEW Precision Power speakers are a combination of the good, the bad, and the ugly! At least they are not calling “Pro Audio Drivers and Niobium Tweeters” car stereo speakers! The NEW PPI lineup is broken down into four series: The PowerClass, ATOM Series, Sedona Series, and Tweeters/Pro. There is a little bit here for everyone and every budget, so let’s discuss it. But this time around, let’s go in a reverse order starting with the UGLY!
Tweeters/Pro Audio – Seem that everyone nowadays is selling pro audio bullet tweeters for car stereo applications, and I am not talking about fleamarket brands like BOSS Audio, Pyramid, and Pyle. I am talking about the Pioneer TS-B400PRO and others. IMO – these types of tweeters have no place in car audio or any nearfield application since they cause extreme early hearing fatigue and eventually loss of hearing in the upper treble. But if you listen exclusively to RAP music, I guess that is more than adequate. Although I have to say, the Precision Power PT.4 Tweeters look very interesting for a high-end home audio project!
Sedona Series – The Precision Power Sedona series are ideal for OEM replacement speakers or a small, moderate-power system if you cross the mids and highs at 80hz or higher. With that said, the only component set in the series, the SC.65, looks very attractive. However, the electrolytic caps on the crossover are a big disappointment. Nevertheless, it reminds me of the old-school MB Quarts Autobon series, that is, before MQ Quart became a Chinese product!
ATOM Series – The ATOM Series speakers are nothing to write home about. Nevertheless, they feature a pulp paper speaker cone for a more natural sound compared to many of the polypropylene units in the market today. As well as a specially contoured Teteron dome tweeter to reduce distortion. Teteron® is a durable polyester and rayon synthetic material formed into its dome shape. Although it is easy to see that these are better drives, the presence of an iron-core inductor, sand cast resistors, and electrolytic capacitor in the passive crossover of the AS.65C2 Components is a letdown.
PowerClass – The PowerClass Series speakers are the best Precision Power offers nowadays! The coaxial does not do any for me since they are not dual concentric. However, the P.65C3 Three Way Components did catch my eye. The P.65C3 Components consist of an Air Motion Transformer tweeter capable of playing up to 40khz., a 3″ midrange driver, and a 6.5″ midbass woofer featuring a die-cast aluminum frame, inverted surround, strontium magnets, and natural fiber composite cone. But as with everything else in the speaker line, some things leave much to be desired. For example, PVC “sealer” integrated trim ring grill, integrated nickel plated spring terminals, and a passive crossover litter with cheap components such as sand cast receiver, electrolytic caps, and iron core inductors. I would like to hear these with discrete power and a nice DSP crossover in front of it.
Precision Power Signal processors
Not much to see here! I am not sure that the PPI team is in touch with today’s car audio installation trends, but half-din EQs and Epic Center wanting to be processors is just not going to cut. There are four SKUs in the Precision Power Signal processors line, and they are as follows:
- The E-5V – 5-Band Parametric Equalizer w/ LED Display, Bass Before Amp Restoration Processor/Maximizer, high voltage (up to 8.5V) pre-amp, and front independent volume control the front, rear, and subwoofer.
- DZ – 3 and/or 4 Band Dual-Zone Equalizer – This 1/2 DIN 3 or 4 bands dual-zone equalizer features two sets of RCA inputs (main and a selectable auxiliary input). High voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels with independent master volume, subwoofer level, and fader controls to maintain your highs and lows in balance.
- 7 – 5-Band Dual Zone Parametric Equalizer & Bass Processor w/ LED Display and Auxiliary Input. Features high voltage (up to 7V max) pre-amp RCA outputs for the Front, Rear, and Subwoofer channels as the other models. Variable 15-50Hz 12dB subsonic filter and variable 30-300Hz subwoofer low-pass filter.
- 8 – Bass Before Amp Restoration Processor/Maximizer maximizes the ultra-low bass on all types of recorded material. The processor detects bass harmonics, then digitally recreates the original essentials for live music’s incredible punch and impact. There is a selectable “center frequency,” which can be as low as 27Hz or 63Hz, and Q.
I remember also hearing about a NEW DSP processor in the works, but at the time of this post, it was not listed on the website. That being the DSP-88R – a 31-Band DSP (Digital Signal Processor). The DSP-88R was designed to be a user-friendly DIY DSP that offers the features and performance you need.
Conclusion:
I genuinely hope Precision Power (PPI) gets it together under new management and ownership. That is because after all the consolidation we have seen in the last few years, car audio enthusiasts like myself are finding it more and more challenging to find genuine audiophile quality components for car audio.
Popular Links Related to Car Audio Tweeters in Macon-Bibb County, GA.
Without a question that if looking for Car Audio Tweeters in Macon-Bibb County, GA you have many options. Although, car manufactuerer’s like Saturn are making a lot more difficult to upgrade your car stereo you can still have bass in your vehicle, and we‘re positive that you will be able to find a local car stereo installation place Macon-Bibb County, GA that it up to the task. We want to help you in this process be providing you the best deals on car audio in or near Macon-Bibb County, GA. From Dash Camera For Car Front And Rear to Car Audio Speakers 5X7 we got you covered. It is often said that music is the best way to change you mood and at ThunderEletronics.Net we want to be your best option when searching for Car Audio Tweeters in Macon-Bibb County, GA!