Car Audio Amplifier Monoblock in Kent, OH
If you are seeking Car Audio Amplifier Monoblock in Kent, OH, you should consider our car audio store. One of the reasons a lot of car audio enthusiasts stop by our site every day looking for things like car audio bargain is not because we are the best known but because car stereo enthusiast into DIY car stereo installation knowt that Thunder Eletronics has a broad selection of everything from car speakers, car amps and car stereos to MP3 decks and subs with FREE shipping.
Don’t matter if you’re looking for Car Audio Amplifier Monoblock Kent, OH or Car Stereo Double DIN & Backup Cam we are confident you will find our offerings impressive. That is because at ThunderEletronics.Net we put a lot of time and effort selecting the products we sell so that you have the easiest car stereo installation experience and a competition ready car stereo system you will be happy with and your friends would want to buy. So, tell all your friends for Car Audio Amplifier Monoblock in Kent, OH take a look at Thunder Eletronics for great prices and up to date for Car Audio Amplifier Monoblock in Kent, OH or Car Sound Deadening we are sure you’ll happy with the variety at Thunder Electronics. For the best prices on car audio midrange & midbass and fast expedited shipping, and misleading social media ads you can count on Thunder Electronics!
Best Selling Car Audio Amplifier Monoblock Near Kent, OH
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- 1 channel x 3,500 watts @ 1 ohm
- 1 channel x 1,750 watts @ 2 ohms
- 1 channel x 875 watts @ 4 ohms
- Operates in mono mode only
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 1000 Watts MAX x 1 @1-Ohm, 500 Watts RMS x 1 @1-Ohm, 350 Watts RMS x 1 @2-Ohms,200 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE500.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono...
- This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is...
- The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is...
- The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
- The HD line offers Monoblock amplifiers that operate at 1, 2, or 4 Ohms, making them perfect for a variety of setups, from subwoofers to tweeters.
- The Taramps HD 3000 delivers 3000 Watts RMS. This monoblock amp offers exceptional flexibility and now includes compatibility with Monitor Level Remote.
- The Positive/Negative Power Cable is 4 AWG | The Output Cables Wire Gauge is 9 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 150A.
- Perfect for various car audio setups, this perfect amplifier comes equipped with a Crossover, Input/Output settings and a precise Level Control.
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- Power - 2000 Max x 1 @2 Ohms, 1000 Max x 1 @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- 2Ω stable; PWM MOSFET Power supply
- RCA and speaker level inputs
- Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
- Full range or LPF mode switch
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Last update on 2024-12-18 / Images Source Amazon Product API
Blog Post Related to Car Audio Amplifier Monoblock in Kent, OH.
How Reasonable is AudioControl?
AudioControl has existed for up to 40 years and has been a leading brand in car audio. They were the pioneers of The [...]
Tell-Tell Signs of a Good Sounding Car Speaker
When it comes to car audio and car audio speakers, one should never consider buying them without listening to them. Preferably in a [...]
Perfect Speaker for Your Car
Your car's audio system plays a crucial role in enhancing the overall driving experience. A key component of this system is the [...]
Top Links Related to Car Audio Amplifier Monoblock in Kent, OH.
Without a question that if searching for Car Audio Amplifier Monoblock in Kent, OH you have many options. Even though, car manufactuerer’s like Mazda are making a lot more difficult to upgrade your car stereo you can still have bass in your vehicle, and we are confident that you can find a professional car audio installation shop Kent, OH that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car stereo in or near Kent, OH. From Car Audio Amplifier Monoblock to Car Audio Capacitor we have what you are looking for. It is often said that music is life and at Thunder Eletronics we want to be your go-to if searching for Car Audio Amplifier Monoblock in Kent, OH!