Car Audio Amplifier Monoblock in Broken Arrow, OK
If you are seeking Car Audio Amplifier Monoblock in Broken Arrow, OK, you need to consider ThunderEletronics.Net. One of the reasons hundreds of car stereo enthusiasts visit our site every day searching for things like car audio repair near me is not because we are the most popular but because DIY car audio enthusiast knowt that ThunderEletronics.Net has a broad selection of stereos, speakers, subs, and amps with FREE shipping.
Don’t matter if you are looking for Car Audio Amplifier Monoblock Broken Arrow, OK or 10-Inch Car Subwoofer we are confident you’ll find our offerings impressive. That is because at ThunderEletronics.Net we go to great lengths researching the products we sell so that you have the easiest car stereo installation experience and a top notch car audio system you will be happy with and your friends will wish they had. So, tell all your friends for Car Audio Amplifier Monoblock in Broken Arrow, OK visit Thunder Eletronics for great prices and top brands for Car Audio Amplifier Monoblock in Broken Arrow, OK or Car Audio Midrange & Midbass we’re sure you’ll satisfied with the options at Thunder Electronics. For the best selection on car amplifier wiring kit and fast expedited shipping, and no games you can count on Thunder Electronics!
Best Selling Car Audio Amplifier Monoblock Near Broken Arrow, OK
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
- By Orion High Performance Car Audio
- CBT4500.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
- Watts @ 1 Ohm Mono 14.4V: 1200W
- Max Music Peak Power: 4500W
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining...
- Small Footprint and Sturdy Design: Made it precision metal potentiometer for precise tuning and sturdy construction.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- MOSFET POWER SUPPLY: This powerful amplifier is outfitted with metal oxide semiconductor field-effect transistors that allow it to quickly switch from full to non-conduction operation for high efficiency...
- MAX POWER OUTPUT: 3000 watts into a single channel at 2 ohms. Maximum power output of 1250 watts into a single channel at 4 ohms. This amplifier is intended to power your subwoofer(s), giving them the...
- SLIM SIZE DESIGN: This amplifier has a slim design that makes it very convenient. It comes complete with all necessary mounting hardware for easy installation. This is very portable and lightweight to...
- VARIABLE BASS BOOST: Variable bass boost makes it easy to customize the low bass within the boost range to your preferences. Enhanced audio and bass, easy to use with user friendly controls. Reliable with...
- Ultra Compact MOSFET Monoblock Class D Car Amplifier
- RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
- Frequency Response: 15Hz - 270Hz
- Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- 2000 W MAX Power @ 2 Ohm x 1 Channel
- 1000 W MAX Power @ 4 Ohm x 1 Channel
- High and Low Level Inputs
- Variable Low Pass Crossover, Variable Bass Boost
- Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
- PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
- MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
- SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
- Power: 1 Channel Monoblock amplifier delivers 5000 watts max power to a single channel. No need to bridge, this is done internally in this car amplifier. 2000 watts of RMS power to your subwoofers.
- Strapable Operation: You can double the load by strapping 2 of these monoblock amplifiers to double your power output. These amps are durable and built to deliver monster power to your speakers.
- Build Specs: The OD1-5000D is built with a Military Grade PCB and with a PWM mosfet power supply. This amp also comes with direct short, thermal, & overload circuit protection to make sure your amplifier...
- In the Box: In the mono amp packaging you will find mounting brackets, a manual, bass knob and cable and of course a monster of an amplifier. Power Acoustik recommends professional installation and solid...
- Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
- Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Last update on 2024-07-31 / Images Source Amazon Product API
Blog Post Related to Car Audio Amplifier Monoblock in Broken Arrow, OK.
Do aftermarket stereos add value to your car?
In the car world, people always want to make their driving experience better. One way they do this is by changing the [...]
Cars With The Best Factory Sound Systems
Gather all audio enthusiasts and audiophiles; we are about to dive into some cars with the best factory sound systems. Usually, most car [...]
Blaupunkt Car Stereo Amplifiers
As of late, we have started to see a lot more Blaupunkt car amps, speakers, and subwoofers online and at Walmart [...]
How Good are Kinetik Batteries?
Kinetik started its journey with two men trying to build professional systems in a car garage. It was their love for music, sound production, and perfectionism that pushed them to build the high-end stereos that the Kinetik industries are known for. They started with a speaker box designed for trucks and cars, and from then, their business blew up! There are a lot of products that they’ve produced, such as the Outdoor Speakers, Microfit and Flow In-Ear Headsets, and Hideaway Powered Subwoofer.
However, for the entirety of this article, we will focus on the Kinetik Battery. The Kinetik battery has a high-watt system that provides energy for trucks, SUVs, and many vehicles with strong energy demands.
Kinetik Batteries
First off, this battery can be used in place of the battery in your vehicles as well as a supplementary battery for other audio speakers with high performance. There are different types of Kinetik batteries, such as the 700 cca battery, perfect for four-cylinder engines, and the 1000 cca, perfect for eight-cylinder engines. Additionally, the Kinetik batteries are quite easy to install; all you need to do is take the old battery out and secure the new one.
The Kinetik batteries are manufactured with AGM technology which means that they can withstand strong temperatures. The batteries are also easy to maintain as you don’t have to bother yourself about putting water in the cells or checking the level of fluids. One thing that stands out for the Kinetic battery is that it can maintain a perfect voltage for a very long while due to its reserve capacity. This makes it one of the best batteries on the market.
The average lifespan of batteries in the market is around five years, but the Kinetik battery lasts for eight years! It also has good power efficiency, which is a testament to how long it can last; it can be recharged at least 60 times before any change in the power comes on. The size is very portable and can be easily carried in the trunk of your car with no issue.
The AGM technology used to produce these batteries means it will work better than most in the market. This makes it about 15 times more durable because it is resistant to vibrations.
Standout Features
These amazing audio batteries are designed by those who understand that you cannot build an audio system without power; it is the key element. This is why they are made in the USA from 99.9% pure lead and a casing with reinforced material. It also produces more current than batteries that have power cells more than twice their size. This makes the Kinetik battery small but mighty.
The array of models ranges from high-end batteries that are relatively expensive and suitable for energy-demanding cars and speakers to low-cost batteries that still give your money’s worth.
Conclusion
Kinetik batteries are built to last, and if you get them, you will be making a good investment.
Trending Searches Related to Car Audio Amplifier Monoblock in Broken Arrow, OK.
Without a question that if looking for Car Audio Amplifier Monoblock in Broken Arrow, OK you have many options. Although, car manufactuerer’s like Bentley Motors are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your car, and we‘re certain that you can find a professional car audio installation place Broken Arrow, OK that it up to the task. At Thunder Electronics we want to help you in this process be providing you the best deals on car audio in or near Broken Arrow, OK. From Car Stereo Double DIN & Backup Cam to Car Audio Capacitor we got you covered. Many will tell you that music is the best way to change you mood and at Thunder Eletronics we want to be your best option if looking for Car Audio Amplifier Monoblock in Broken Arrow, OK!