Car Audio Amplifier 2-Channel in Altamonte Springs, FL
When you are seeking Car Audio Amplifier 2-Channel in Altamonte Springs, FL, you have to consider ThunderEletronics.Net. The main reason thousands of car stereo enthusiasts stop by our website every week searching for things like car audio RCA cables is not because we are the cheapest but because DIY car stereo enthusiast knowt that our car audio store offers a wide selection of amplifiers, car stereo receivers, changers, digital media receivers, equalizers, satellite radio, speakers, and subwoofers with FREE shipping.
Whether you are looking for Car Audio Amplifier 2-Channel Altamonte Springs, FL or Car Audio Installation we are pretty sure you’ll find our inventory impressive. That is because at ThunderEletronics.Net we put a lot of effort researching the products we offer so that you have the easiest car audio installation experience and top rated car stereo system you will be happy with and your friends would want to buy. So, tell all your friends for Car Audio Amplifier 2-Channel in Altamonte Springs, FL check out ThunderEletronics.Net for great prices and latest selection for Car Audio Amplifier 2-Channel in Altamonte Springs, FL or 8-Inch Car Subwoofer we’re sure you will content with the inventory at our site. For the best selection on 15-inch car subwoofer and fast expedited shipping, and no six for a nine games you can count on ThunderElectronics.Net.
Best Selling Car Audio Amplifier 2-Channel Near Altamonte Springs, FL
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying
- 750 watt maximum power full-range amplifier Compactly built so this amplifier can fit perfectly into any trunk Blaupunkt 750 Watt Monoblock Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance of channel: 2/1 Channel
- Featuring 2-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150. Max. Output Power
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- COBALT SERIES: Introducing our Class A/B Amplifier CBA2500.2, boasting exceptional frequency response rates and a cutting-edge crossover, elevating its status among competitors. Its robust construction and...
- PERFORMANCE: Engineered to effortlessly power car speakers with a continuous 2/4 Ohm load, ensuring seamless performance devoid of overheating or extraneous noise. This amplifier is designed to power...
- QUALITY: The CBA2500.2 amplifier for car stereo speakers with a MOSFET power supply comes with Low/High-level inputs. A low-level (RCA) input is measured in voltages. A high-level (+/- wire) input is...
- FEATURES: The CBA2500.2 amplifier has features like - Frequency Response: 10~30kHz, Low Pass Filter, High Pass Filter, Bass Boost, and MOSFET Power Supply. The ultimate powerhouse for your audio needs.
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Textured aluminum heatsink
- High level inputs
- Selectable bass boost on all models
- Variable crossover network
- 2 channels x 750 watts @ 2 ohms
- 2 channels x 325 watts @ 4 ohms
- 1 channel x 1,500 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Power - 500 Watts Max x 2 @2-Ohms, 250 Watts Max x 2 @4-Ohms, 1000 Watts Max x 1 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss &...
- The Taramps TS line has Multichannel amplifiers, being Full Range amplifiers with 4 channels, and are also amplifiers with high power and cost-benefit
- The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with LED indicator and short-circuit protection
- The Positive/Negative Power Cable is 11 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 20A
- 4-Channel Amplifier
- 55 watts RMS x 4 at 4 ohms
- 80 watts RMS x 4 at 2 ohms
- 160 watts RMS x 2 bridged output at 4 ohms (4-ohm stable in bridged mode) CTA-2006 compliant
- 2000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 2000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you w/ crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- 2 channels x 1,000 watts @ 2 ohms
- 2 channels x 500 watts @ 4 ohms
- 1 channel x 2,000 watts (mono bridged) @ 4 ohms
- Operates in stereo, bridged mono, or stereo/bridged mono simultaneously
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- High Power Output: Delivers 2800W peak power, 700W RMS bridged at 4 ohms, and 350W RMS per channel at 2 ohms, providing robust and clear audio for your car's subwoofer system.
- Advanced Sound Control: Features fully adjustable 12dB/octave crossover, subsonic filter (15Hz-55Hz), and 12dB bass equalizer for precise audio tuning.
- Efficient MOSFET Technology: High-speed MOSFET power supply ensures stable and efficient performance, enhancing overall sound quality.
- User-Friendly Design: Includes remote dashboard subwoofer control, LED-illuminated logo, and RCA line input/output for flexible installation and easy operation.
- 4000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- Max Output Power : 1500 Watts / RMS Power (2 ohms) : 325 Watts X 2 / RMS Power (4 ohms) : 160 Watts X 2
- Engineered to be the most efficient car multichannel amplifier in its class so that you can get the most out of your vehicle’s electrical system
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 550 Max x 4 @2-Ohms, 275 Max x 4 @4-Ohms, 1100 Max x 2 Bridged @4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Specs - Dimensions: 17” x 10.31” x 2.25”, Weight: 12.53 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 103 dB, Frequency Response: 9 Hz to 50 kHz, Fuse Quantity: 2 40 Amp...
- Power – 500 Max x 2 @ 2 Ohms, 250 Max x 2 @ 4 Ohms, 1000 Max Bridged x 1 @ 4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
Last update on 2024-12-18 / Images Source Amazon Product API
Blog Related to Car Audio Amplifier 2-Channel in Altamonte Springs, FL.
Do aftermarket stereos add value to your car?
In the car world, people always want to make their driving experience better. One way they do this is by changing the [...]
Beginners Guide To Car Audio Systems
There's nothing like good music on a cool day while driving your car. Music can improve your day, and it is suitable for [...]
Are JL Subwoofers Any Good?
JL Audio is one of the most notable names in the audio business. You can't escape them. They make amplifiers, subwoofer systems, OEM [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it’s now a leading face in a lot of areas. Kenwood started production in 1946 and established itself in Japan and later on in other countries. It has grown to become one of the most known brands of speakers for cars but has broadened its horizons towards home stereo units. So the question is, are Kenwood Speakers any good?
Well, let’s get into it.
Kenwood Speakers
Kenwood has a variety of speakers that you can pick from, such as high-power four-way speakers, two-way flush mount speakers, and three-way speakers. There are even five-way flush speakers.
These speakers have the capability to handle over 500 watts without blowing. The woofers are formed from polypropylene micro, which gives your music that boom bass. This way, you hear music free of distortion and background noise.
Performance
Kenwood usually has many speaker units with a range of features, such as butyl rubber, neodymium magnets, advanced crossover networks, and diamond array pattern diaphragms. These speakers allow for excellent power handling, and their sleek design gives them a very aesthetic look
Sound Quality
Another big deal for Kenwood Speakers is the sound quality. It offers Excelon that gives good sound range as well as sound quality. Note that these sound ranges differ according to the size and type of the speaker. Another thing that stands out is the durability of the speakers. You can be sure that you will go a very long time without changing any part of the speaker even if you live in harsh conditions.
Speaker Cone Construction
Kenwood was one of the first companies that started using urethane in speakers that optimizes cone movement when sound is getting reproduced. Additionally, the fiber-textured polypropylene is produced in such a way that they optimize strong lows and are great sounding.
There is also a speaker line produced by Kenwood with polypropylene mica composite cones and cloth edges. This is manufactured with a one-piece steel basket which means that durability is doubled because multiple pieces of steel wouldn’t loosen over time.
Compatibility and Pricing
One very nice thing about Kenwood Speakers is that it is made to be compatible with almost any car model. This way, any car amplifier will connect just fine to the speaker. This compatibility makes you able to connect your Kenwood Speaker to any system so far their OHMS and RMS ratings are compatible.
Additionally, their pricing is relatively affordable when compared to speakers of other brands, especially high-end brands. This way, you do not have to break the bank to enjoy the full range of Kenwood speakers’ capability. Also, like many speakers, Kenwood’s pricing is arranged according to frequency response and power handling.
Conclusion
To answer any extra questions, yes, Kenwood Speakers are good. Their sound production, durability, and price make them a good buy. They have been in the industry long enough and have truly made their mark.
Popular Links Related to Car Audio Amplifier 2-Channel in Altamonte Springs, FL.
There is no doubt that when looking for Car Audio Amplifier 2-Channel in Altamonte Springs, FL you have many options. Even though, car manufactuerer’s like Subaru are making a lot more difficult to install aftermarket car audio you can still have a better than OEM car audio system in your vehicle, and we‘re confident that you will be able to find a local car stereo installation place Altamonte Springs, FL that it up to the task. At Thunder Electronics we want to help you in this process be providing you the best deals on car audio in or near Altamonte Springs, FL. From Dash Camera Installation to Car Audio Speaker 5.250 Inch we got you covered. Many will tell you that music is the best way to change you mood and at Thunder Eletronics we want to be your go-to when looking for Car Audio Amplifier 2-Channel in Altamonte Springs, FL…