Car Amplifier Sale in Enid, OK
If you’re seeking Car Amplifier Sale in Enid, OK, you should consider our car audio store. The main reason many car audio enthusiasts visit our website every year looking for things like car audio equalizer is not because we are the best known but because DIY car audio enthusiast knowt that ThunderEletronics.Net has a broad selection of everything from car speakers, car amps and car stereos to MP3 decks and subs with FREE shipping.
Don’t matter if you’re looking for Car Amplifier Sale Enid, OK or 15-Inch Car Subwoofer we are pretty sure you will find our selection adequate. That is because we go to great lengths researching the products we offer so that you have the easiest car stereo installation experience and a top notch car audio system you can be proud of and your friends will envi. So, tell all your friends for Car Amplifier Sale in Enid, OK check out ThunderEletronics.Net for great prices and best selling for Car Amplifier Sale in Enid, OK or Car Audio Battery we’re sure you’ll content with the options at Thunder Electronics. For the best selection on car stereo amplifier 5-channel and fast expedited shipping, and misleading advertising you can count on ThunderElectronics.Net…
Best Selling Car Amplifier Sale Near Enid, OK
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 4 channels x 375 watts @ 2 ohms
- 4 channels x 185 watts @ 4 ohms
- 2 channels x 750 watts (mono bridged) @ 4 ohms
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 2000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system; Gives you up to 2000W bridgeable output; Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss; The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience;...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection; Has been specially designed from the bottom up to provide safe...
- 2 Ohm Stable Operation & Soft Turn On Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Remote Turn-On / Turn-Off Circuit
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x...
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4...
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB...
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry....
- 🏝️【Compatible for】Fits for all of aftermarket Car Stereo receiver with Android system.
- 🏝️【Easy installation】Just plug and play on your Android Car Stereo receiver. No need complex connection, you can get clear and pleasant high-quality sound from this digital amplifier for cars
- 🏝️【Three volumn modulation】:Adjust the sound effect to the appropriate level based on your car audio receiver by button "Bass",MID","HIGH", you can get 5x improvement in sound power with this...
- 🏝️【Amplify Weak Signals】Android car stereo amplifier can boosts the weak signals from your audio source or pre-amplifier without compromising the audio quality, resulting in enhanced sound...
- 4000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Power - 450 Watts Max x 4 @2-Ohms, 225 Watts Max x 4 @4-Ohms, 900 Watts Max x 2 Bridged @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Mosfet Power Supply - A MOSFET is basically an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use...
- The Taramps DS line has Multichannel amplifiers, which are Full Range amplifiers with 2 or 4 channels, and also features high power and cost-benefit.
- The DS 440x4 has 440 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multi-channel amplifier features 4 channels with 110 Watts RMS each (440 watts RMS total) and also with high-level input and automatic activation.
- The Positive/Negative Power Cable is 9 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 50A.
- 4-Channel Class A/B Amp - Upgrade your car audio with a 4-channel amp for clearer sound. Customize your sound by connecting various speakers, balance audio between front and rear, and even add a subwoofer...
- Maximum Power Output – Power up your music. The GM-A6704 cranks out an impressive 1,000 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 4 at 4 ohms (190...
- Efficiency – The Pioneer GM-A6704 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- Digital Amplifier Technology
- Speaker Level Input w/ Signal Sensing Turn-on
- 2 Ohms Load Capability. High Pass Filter : 50Hz-200Hz, -12dB/oct (A/B)
- Power MOS-FET Switching Power Supply
Last update on 2024-12-06 / Images Source Amazon Product API
Blog Post Related to Car Amplifier Sale in Enid, OK.
Are 2 x 10-Inch Subs Louder Than 1 x 12?
In the world of car audio and home theater systems, the quest for powerful and impactful bass is a never-ending journey. Audiophiles [...]
Revealing the Secrets Of a Good Car Speaker
As we spend more time in our cars, the importance of a high-quality audio system becomes increasingly apparent. Whether you're a music [...]
Are Factory Premium Car Audio System Worth it?
Over the last few years, we have seen a trend emerge of mergers between car manufacturers and audio brands with a [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it’s now a leading face in a lot of areas. Kenwood started production in 1946 and established itself in Japan and later on in other countries. It has grown to become one of the most known brands of speakers for cars but has broadened its horizons towards home stereo units. So the question is, are Kenwood Speakers any good?
Well, let’s get into it.
Kenwood Speakers
Kenwood has a variety of speakers that you can pick from, such as high-power four-way speakers, two-way flush mount speakers, and three-way speakers. There are even five-way flush speakers.
These speakers have the capability to handle over 500 watts without blowing. The woofers are formed from polypropylene micro, which gives your music that boom bass. This way, you hear music free of distortion and background noise.
Performance
Kenwood usually has many speaker units with a range of features, such as butyl rubber, neodymium magnets, advanced crossover networks, and diamond array pattern diaphragms. These speakers allow for excellent power handling, and their sleek design gives them a very aesthetic look
Sound Quality
Another big deal for Kenwood Speakers is the sound quality. It offers Excelon that gives good sound range as well as sound quality. Note that these sound ranges differ according to the size and type of the speaker. Another thing that stands out is the durability of the speakers. You can be sure that you will go a very long time without changing any part of the speaker even if you live in harsh conditions.
Speaker Cone Construction
Kenwood was one of the first companies that started using urethane in speakers that optimizes cone movement when sound is getting reproduced. Additionally, the fiber-textured polypropylene is produced in such a way that they optimize strong lows and are great sounding.
There is also a speaker line produced by Kenwood with polypropylene mica composite cones and cloth edges. This is manufactured with a one-piece steel basket which means that durability is doubled because multiple pieces of steel wouldn’t loosen over time.
Compatibility and Pricing
One very nice thing about Kenwood Speakers is that it is made to be compatible with almost any car model. This way, any car amplifier will connect just fine to the speaker. This compatibility makes you able to connect your Kenwood Speaker to any system so far their OHMS and RMS ratings are compatible.
Additionally, their pricing is relatively affordable when compared to speakers of other brands, especially high-end brands. This way, you do not have to break the bank to enjoy the full range of Kenwood speakers’ capability. Also, like many speakers, Kenwood’s pricing is arranged according to frequency response and power handling.
Conclusion
To answer any extra questions, yes, Kenwood Speakers are good. Their sound production, durability, and price make them a good buy. They have been in the industry long enough and have truly made their mark.
Top Links Related to Car Amplifier Sale in Enid, OK.
Without a question that when looking for Car Amplifier Sale in Enid, OK you have many options. Even though, car manufactuerer’s like Mini are making a lot more difficult to install aftermarket car audio you can still have a good sound system in your vehicle, and we‘re confident that you can find a local car stereo installation shop Enid, OK that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car stereo in or near Enid, OK. From Car Stereo Amplifier 5-Channel to Car Audio Speaker 3.5 Inch we have what you are looking for. It is often said that music is life and at Thunder Eletronics we want to be your best option when searching for Car Amplifier Sale in Enid, OK!