Pioneer Subwoofers in Temple, TX
When you are looking Pioneer Subwoofers in Temple, TX, you have to consider our car audio store. The reason a lot of audio enthusiasts visit electronics.net every week looking for things like car stereo near me is not because we are the cheapest but because DIY car audio enthusiast knowt that ThunderEletronics.Net has a wide selection of low prices car subwoofers, car amplifiers, car speakers and electronics with FREE shipping.
Don’t matter if you are searching for Pioneer Subwoofers Temple, TX or Dash Camera Installation we are confident you’ll find our selection adequate. That is because at Thunder Eletronics we make a great effort selecting the products we offer so that you have the easiest car audio installation experience and a top of the line car audio system you can be proud of and your friends will wish they had. So, tell all your friends for Pioneer Subwoofers in Temple, TX visit ThunderEletronics.Net for great prices and top brands for Pioneer Subwoofers in Temple, TX or Car Sound Deadening we are sure you will fulfilled with the options at Thunder Electronics. For the best prices on car amplifier wiring kit and quick expedited shipping, and no six for a nine games you can count on Thunder Electronics.
Best Selling Pioneer Subwoofers Near Temple, TX
- injection-molded polypropylene/glass fiber/mica cone with elastic polymer/reinforced fiber surround
- power handling: 500 watts RMS (1600 watts peak)
- mounting depth: 6.22"
- Built-in 170 W Max (50 W RMS) Class D amplifier
- 8" x 5-1/4" Rectangular Subwoofer (7" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11" W x 7.87" D x 2.76" H)
- 8 in. subwoofer
- 700 watts max, 250 watts RMS
- Frequency response: 20 Hz to 1.4 kHz
- Unique design with just 2-5/8 in. mounting depth
- GENERAL || * Size : 12 inch || * Continuous Power Handling (RMS) : 600W || * Maximum Peak Power Handling : 2,000 Watt Max Power (600W Nom)|| * Impedance : Dual 4Ω Voice Coil || * Woofer Composition :...
- AUDIO || * Sensitivity (1W/1 m) : 78dB || * Frequency Range : 20 Hz - 4.7 kHz || BUTYL RUBBER SURROUND || Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the...
- ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP) || Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone – with low mass and high damping, PP...
- To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting...
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet
- Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
- Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
- Enclosure Features Carpet finish
- Pioneer TS-A250D4 10 Dual 4 ohms voice coil subwoofer
- 10" Glass fiber and mica interlaced injection molded polypropylene (IMPP) cone construction
- Butyl rubber surround and aramid Fiber spider for strength and linearity during high excursion
- Oversized 56 oz Double stacked magnet and vented pole yoke for increased power handling
- 1 100 watts Max power (300 watts nom )
- Built with high bandwidth high output and low distortion 300-watt class D amplifier
- Size 10" cone
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – 10-inch powerful pre-loaded subwoofer with sealed enclosure produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Butyl Rubber Surround - Butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in...
- Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) - The Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep,...
- Large Diameter Voice Coil and Double Stacked Magnets - The D-Series subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL...
- Dynamic Tornado Cone design for more stability during excursion
- Rubber surround
- 8-Gauge push terminals for easy connectivity
- 10 in.
- 1, 200w Max / 300w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- 3, 000W Max. 1, 000W Nom. Power (Sub)
- 1, 200W Max. 600W Nom. Power (Amp)
- Variable Bass Boost (0 to +12 dB, 40Hz to 100Hz)
- Dual Voice Coil
- 700w Max / 250w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – This powerful subwoofer and built-in amplifier, the subwoofer produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Amplified Design - All in one design simplifies installation and space, making it an ideal choice for vehicles with limited space. Built-in amplifier ensures optimal power delivery to the subwoofer,...
- Low-Pass Crossover - Adjusting the crossover point (50Hz – 125Hz), you can customize the subwoofer's output to match your preferences and the characteristics of your audio system. Enables you to achieve...
- Excellent Sound Reproduction - Its high-quality components and precise engineering, it delivers accurate and detailed sound. The design and construction minimizes distortion, for clean and crisp bass...
- Built-in 250 W Max (100 W RMS) Class D amplifier
- 9" x 5-1/2" Rectangular Subwoofer (8" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11.75" W x 7.875" D x 3.875" H)
- Passive (non-amplified) design provides system flexibility
- 4ohm Single Voice Coil (SVC)
- Voice Coil Cooling System (VCCS)
- Extended magnet pole for improved linearity
- Pioneer TS-WX130DA Compact 8" x 5. 25" 160-Watt Active Subwoofer with Built-in Amp 8" x 5. 25" woofer ; 160W max
- 50W nominal; Aluminum cone; Urethane surround; Built-in Class D amp; Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes; Gain
- LPF
- phase & bass modes controllable at remote; Freq resp
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Car-SUV-Truck Amplified Underseat Subwoofer 160W
- Flat active subwoofer
- Easy to install for example under the seat
- Frequency response 40 to 200 Hz
Last update on 2024-08-03 / Images Source Amazon Product API
Article Related to Pioneer Subwoofers in Temple, TX.
Are 2 x 10-Inch Subs Louder Than 1 x 12?
In the world of car audio and home theater systems, the quest for powerful and impactful bass is a never-ending journey. Audiophiles [...]
Is Skar a Good Car Audio Brand?
If you are into car stereo, you just can't ignore Skar Audio. Although this is a relatively young company, since launching its first [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it's now a leading face in [...]
Clarion DSP a Full Digital Sound system
The car audio industry is a constantly changing tech environment, and to be honest, I am not as into car audio as I used to. Clarion was an okay brand back in the day but never an over-the-top leader in technology. While looking for pricing on getting my windows tinted at several audio shops near me, I kept running into Clarion products, some of which are pretty techie and advanced for a brand of such low profile.
One of the most amazing models is the Clarion’s NX706 navigation receiver. Not only does it have a huge and colorful 7-inch touchscreen, but the fact that it has very few buttons around makes it look even bigger. The built-in navigation software powered by iGo Primo gives those with entry-level vehicle navigation maps for most of North America, including Canada as well as Puerto Rico. Unlike cell phone-based navigation be iGo Primo system has over 11 million points of interest, along with 3D mapping that allows realistic views of the terrain you are driving, including buildings and landmarks for many metropolitan areas.
Digital Sound system
Things got pretty interesting when the salesperson approached me and labeled this head unit an audiophile-quality piece! I said to myself this guy is just trying to sell me a radio. He went on to explain that the Clarion NX706 is one of the few head units in the market with a digital optical output. He also explained that you can now build an entire 100% digital sound system with Clarion products.
The way it will work is with the Clarion NX706 as the foundation or a piece and the addition of Clarion’s other digital lineup consisting of a DSP module, self-powered tweeters, self-powered 6 1/2, as well as a self-power 10-inch subwoofer. I said wait a minute. If they are self-powered, they’re not digital. Somewhere along the line, you have to add an amplifier. At this point, I must have looked pretty dumb because the guy looked at me and smiled. He asked to give him a minute as he went to the back and pulled out some literature on the Clarion Z-System.
As he opened the literature, he explained that they are no analog amplifiers but rather a concept developed by Intel called large-scale integration or LSI chip. Each of the six speakers has one of these chips, along with an extremely efficient six-voice coil motor. Furthermore, he went on to show that the only thing connecting the speakers to the DSP module is a twisted 18-gauge cable. Each of the five speakers in the system uses a 100% digital signal to modulate the power supply voltage, which drives the speakers. In effect, the same twisted pair of cables carry the DC voltage along with the digital information. The digital signal is combined directly with the voltage by the LSI chip, and it drives the speaker.
Top Searches Related to Pioneer Subwoofers in Temple, TX.
There is no doubt that if searching for Pioneer Subwoofers in Temple, TX you have many options. Even though, car manufactuerer’s like Genesis are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your vehicle, and we are certain that you can find a local car stereo installation place Temple, TX that it up to the task. We want to make this process easier be offering you the best deals on car stereo in or near Temple, TX. From Better Car Stereo Single DIN to Car Audio Speaker 6X9 we got you covered. It is often said that music is life and at ThunderEletronics.Net we want to be your best option if searching for Pioneer Subwoofers in Temple, TX.