Car Audio Amplifier Monoblock in Stillwater, OK
If you are looking Car Audio Amplifier Monoblock in Stillwater, OK, you should consider ThunderEletronics.Net. The reason many audio enthusiasts visit our website every month looking for things like car audio battery is not because we are the most popular but because stereo enthusiast who like to work in his/hers car knowt that Thunder Eletronics has a broad selection of car amplifier, sub enclosures, head units, and signal processors.
Don’t matter if you are looking for Car Audio Amplifier Monoblock Stillwater, OK or Car Audio Tweeters we are sure you will find our variety suitable. That is because we put a lot of effort researching the products we sell so that you have the easiest car audio installation experience and a competition ready car audio system you will love and your friends will envi. So, tell all your friends for Car Audio Amplifier Monoblock in Stillwater, OK check out Thunder Eletronics for great prices and top brands for Car Audio Amplifier Monoblock in Stillwater, OK or Car Audio Midrange & Midbass we’re sure you will fulfilled with the variety at ThunderElectronics.Net. For the best prices on car stereo amplifier 4-channel and fast expedited shipping, and misleading social media ads you can count on ThunderElectronics.Net!
Best Selling Car Audio Amplifier Monoblock Near Stillwater, OK
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- 1 channel x 3,500 watts @ 1 ohm
- 1 channel x 1,750 watts @ 2 ohms
- 1 channel x 875 watts @ 4 ohms
- Operates in mono mode only
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 1000 Watts MAX x 1 @1-Ohm, 500 Watts RMS x 1 @1-Ohm, 350 Watts RMS x 1 @2-Ohms,200 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE500.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono...
- This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is...
- The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is...
- The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
- The HD line offers Monoblock amplifiers that operate at 1, 2, or 4 Ohms, making them perfect for a variety of setups, from subwoofers to tweeters.
- The Taramps HD 3000 delivers 3000 Watts RMS. This monoblock amp offers exceptional flexibility and now includes compatibility with Monitor Level Remote.
- The Positive/Negative Power Cable is 4 AWG | The Output Cables Wire Gauge is 9 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 150A.
- Perfect for various car audio setups, this perfect amplifier comes equipped with a Crossover, Input/Output settings and a precise Level Control.
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- Power - 2000 Max x 1 @2 Ohms, 1000 Max x 1 @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- 2Ω stable; PWM MOSFET Power supply
- RCA and speaker level inputs
- Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
- Full range or LPF mode switch
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Last update on 2024-12-18 / Images Source Amazon Product API
Blog Post Related to Car Audio Amplifier Monoblock in Stillwater, OK.
Clarion DSP a Full Digital Sound system
The car audio industry is a constantly changing tech environment, and to be honest, I am not as into car audio as I [...]
Perfect Speaker for Your Car
Your car's audio system plays a crucial role in enhancing the overall driving experience. A key component of this system is the [...]
Are 2 x 10-Inch Subs Louder Than 1 x 12?
In the world of car audio and home theater systems, the quest for powerful and impactful bass is a never-ending journey. Audiophiles [...]
How Good are Kinetik Batteries?
Kinetik started its journey with two men trying to build professional systems in a car garage. It was their love for music, sound production, and perfectionism that pushed them to build the high-end stereos that the Kinetik industries are known for. They started with a speaker box designed for trucks and cars, and from then, their business blew up! There are a lot of products that they’ve produced, such as the Outdoor Speakers, Microfit and Flow In-Ear Headsets, and Hideaway Powered Subwoofer.
However, for the entirety of this article, we will focus on the Kinetik Battery. The Kinetik battery has a high-watt system that provides energy for trucks, SUVs, and many vehicles with strong energy demands.
Kinetik Batteries
First off, this battery can be used in place of the battery in your vehicles as well as a supplementary battery for other audio speakers with high performance. There are different types of Kinetik batteries, such as the 700 cca battery, perfect for four-cylinder engines, and the 1000 cca, perfect for eight-cylinder engines. Additionally, the Kinetik batteries are quite easy to install; all you need to do is take the old battery out and secure the new one.
The Kinetik batteries are manufactured with AGM technology which means that they can withstand strong temperatures. The batteries are also easy to maintain as you don’t have to bother yourself about putting water in the cells or checking the level of fluids. One thing that stands out for the Kinetic battery is that it can maintain a perfect voltage for a very long while due to its reserve capacity. This makes it one of the best batteries on the market.
The average lifespan of batteries in the market is around five years, but the Kinetik battery lasts for eight years! It also has good power efficiency, which is a testament to how long it can last; it can be recharged at least 60 times before any change in the power comes on. The size is very portable and can be easily carried in the trunk of your car with no issue.
The AGM technology used to produce these batteries means it will work better than most in the market. This makes it about 15 times more durable because it is resistant to vibrations.
Standout Features
These amazing audio batteries are designed by those who understand that you cannot build an audio system without power; it is the key element. This is why they are made in the USA from 99.9% pure lead and a casing with reinforced material. It also produces more current than batteries that have power cells more than twice their size. This makes the Kinetik battery small but mighty.
The array of models ranges from high-end batteries that are relatively expensive and suitable for energy-demanding cars and speakers to low-cost batteries that still give your money’s worth.
Conclusion
Kinetik batteries are built to last, and if you get them, you will be making a good investment.
Popular Links Related to Car Audio Amplifier Monoblock in Stillwater, OK.
There is no doubt that when searching for Car Audio Amplifier Monoblock in Stillwater, OK you have many options. Even though, car manufactuerer’s like Audi are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your car, and we are positive that you will be able to find a local car stereo installation store Stillwater, OK that it up to the task. At Thunder Electronics we want to make this process easier be offering you the best deals on car stereo in or near Stillwater, OK. From Better Car Stereo Single DIN to 8-Inch Car Subwoofer Box we got you covered. Many will tell you that music is the best medicine there is and at Thunder Eletronics we want to be your first choice if looking for Car Audio Amplifier Monoblock in Stillwater, OK…