Pioneer Subwoofers in Temple, TX
When you are looking Pioneer Subwoofers in Temple, TX, you have to consider our car audio store. The reason a lot of audio enthusiasts visit electronics.net every week looking for things like car stereo near me is not because we are the cheapest but because DIY car audio enthusiast knowt that ThunderEletronics.Net has a wide selection of low prices car subwoofers, car amplifiers, car speakers and electronics with FREE shipping.
Don’t matter if you are searching for Pioneer Subwoofers Temple, TX or Dash Camera Installation we are confident you’ll find our selection adequate. That is because at Thunder Eletronics we make a great effort selecting the products we offer so that you have the easiest car audio installation experience and a top of the line car audio system you can be proud of and your friends will wish they had. So, tell all your friends for Pioneer Subwoofers in Temple, TX visit ThunderEletronics.Net for great prices and top brands for Pioneer Subwoofers in Temple, TX or Car Sound Deadening we are sure you will fulfilled with the options at Thunder Electronics. For the best prices on car amplifier wiring kit and quick expedited shipping, and no six for a nine games you can count on Thunder Electronics.
Best Selling Pioneer Subwoofers Near Temple, TX
- injection-molded polypropylene/glass fiber/mica cone with elastic polymer/reinforced fiber surround
- power handling: 500 watts RMS (1600 watts peak)
- mounting depth: 6.22"
- Built-in 170 W Max (50 W RMS) Class D amplifier
- 8" x 5-1/4" Rectangular Subwoofer (7" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11" W x 7.87" D x 2.76" H)
- 8 in. subwoofer
- 700 watts max, 250 watts RMS
- Frequency response: 20 Hz to 1.4 kHz
- Unique design with just 2-5/8 in. mounting depth
- GENERAL || * Size : 12 inch || * Continuous Power Handling (RMS) : 600W || * Maximum Peak Power Handling : 2,000 Watt Max Power (600W Nom)|| * Impedance : Dual 4Ω Voice Coil || * Woofer Composition :...
- AUDIO || * Sensitivity (1W/1 m) : 78dB || * Frequency Range : 20 Hz - 4.7 kHz || BUTYL RUBBER SURROUND || Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the...
- ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP) || Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone – with low mass and high damping, PP...
- To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting...
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet
- Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
- Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
- Enclosure Features Carpet finish
- Pioneer TS-A250D4 10 Dual 4 ohms voice coil subwoofer
- 10" Glass fiber and mica interlaced injection molded polypropylene (IMPP) cone construction
- Butyl rubber surround and aramid Fiber spider for strength and linearity during high excursion
- Oversized 56 oz Double stacked magnet and vented pole yoke for increased power handling
- 1 100 watts Max power (300 watts nom )
- Built with high bandwidth high output and low distortion 300-watt class D amplifier
- Size 10" cone
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – 10-inch powerful pre-loaded subwoofer with sealed enclosure produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Butyl Rubber Surround - Butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in...
- Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) - The Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep,...
- Large Diameter Voice Coil and Double Stacked Magnets - The D-Series subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL...
- Dynamic Tornado Cone design for more stability during excursion
- Rubber surround
- 8-Gauge push terminals for easy connectivity
- 10 in.
- 1, 200w Max / 300w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- 3, 000W Max. 1, 000W Nom. Power (Sub)
- 1, 200W Max. 600W Nom. Power (Amp)
- Variable Bass Boost (0 to +12 dB, 40Hz to 100Hz)
- Dual Voice Coil
- 700w Max / 250w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – This powerful subwoofer and built-in amplifier, the subwoofer produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Amplified Design - All in one design simplifies installation and space, making it an ideal choice for vehicles with limited space. Built-in amplifier ensures optimal power delivery to the subwoofer,...
- Low-Pass Crossover - Adjusting the crossover point (50Hz – 125Hz), you can customize the subwoofer's output to match your preferences and the characteristics of your audio system. Enables you to achieve...
- Excellent Sound Reproduction - Its high-quality components and precise engineering, it delivers accurate and detailed sound. The design and construction minimizes distortion, for clean and crisp bass...
- Built-in 250 W Max (100 W RMS) Class D amplifier
- 9" x 5-1/2" Rectangular Subwoofer (8" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11.75" W x 7.875" D x 3.875" H)
- Passive (non-amplified) design provides system flexibility
- 4ohm Single Voice Coil (SVC)
- Voice Coil Cooling System (VCCS)
- Extended magnet pole for improved linearity
- Pioneer TS-WX130DA Compact 8" x 5. 25" 160-Watt Active Subwoofer with Built-in Amp 8" x 5. 25" woofer ; 160W max
- 50W nominal; Aluminum cone; Urethane surround; Built-in Class D amp; Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes; Gain
- LPF
- phase & bass modes controllable at remote; Freq resp
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Car-SUV-Truck Amplified Underseat Subwoofer 160W
- Flat active subwoofer
- Easy to install for example under the seat
- Frequency response 40 to 200 Hz
Last update on 2024-08-03 / Images Source Amazon Product API
Article Related to Pioneer Subwoofers in Temple, TX.
Is Soundstage & Imaging in a Vehicle Possible?
Although not easy, the answer to that is a resounding YES! I personally have owned several car stereo systems that rival [...]
Clarion DSP a Full Digital Sound system
The car audio industry is a constantly changing tech environment, and to be honest, I am not as into car audio as I [...]
What Subwoofer Box Design Has Best Sound Quality?
I have been attracted to audio and music reproduction since I was a teenager. When my parents purchased a new stereo system for [...]
Are Kenwood Speakers Any Good?
Kenwood is known for a lot of things, and thanks to how good the company has become, it’s now a leading face in a lot of areas. Kenwood started production in 1946 and established itself in Japan and later on in other countries. It has grown to become one of the most known brands of speakers for cars but has broadened its horizons towards home stereo units. So the question is, are Kenwood Speakers any good?
Well, let’s get into it.
Kenwood Speakers
Kenwood has a variety of speakers that you can pick from, such as high-power four-way speakers, two-way flush mount speakers, and three-way speakers. There are even five-way flush speakers.
These speakers have the capability to handle over 500 watts without blowing. The woofers are formed from polypropylene micro, which gives your music that boom bass. This way, you hear music free of distortion and background noise.
Performance
Kenwood usually has many speaker units with a range of features, such as butyl rubber, neodymium magnets, advanced crossover networks, and diamond array pattern diaphragms. These speakers allow for excellent power handling, and their sleek design gives them a very aesthetic look
Sound Quality
Another big deal for Kenwood Speakers is the sound quality. It offers Excelon that gives good sound range as well as sound quality. Note that these sound ranges differ according to the size and type of the speaker. Another thing that stands out is the durability of the speakers. You can be sure that you will go a very long time without changing any part of the speaker even if you live in harsh conditions.
Speaker Cone Construction
Kenwood was one of the first companies that started using urethane in speakers that optimizes cone movement when sound is getting reproduced. Additionally, the fiber-textured polypropylene is produced in such a way that they optimize strong lows and are great sounding.
There is also a speaker line produced by Kenwood with polypropylene mica composite cones and cloth edges. This is manufactured with a one-piece steel basket which means that durability is doubled because multiple pieces of steel wouldn’t loosen over time.
Compatibility and Pricing
One very nice thing about Kenwood Speakers is that it is made to be compatible with almost any car model. This way, any car amplifier will connect just fine to the speaker. This compatibility makes you able to connect your Kenwood Speaker to any system so far their OHMS and RMS ratings are compatible.
Additionally, their pricing is relatively affordable when compared to speakers of other brands, especially high-end brands. This way, you do not have to break the bank to enjoy the full range of Kenwood speakers’ capability. Also, like many speakers, Kenwood’s pricing is arranged according to frequency response and power handling.
Conclusion
To answer any extra questions, yes, Kenwood Speakers are good. Their sound production, durability, and price make them a good buy. They have been in the industry long enough and have truly made their mark.
Top Searches Related to Pioneer Subwoofers in Temple, TX.
There is no doubt that if searching for Pioneer Subwoofers in Temple, TX you have many options. Even though, car manufactuerer’s like Genesis are making a lot more difficult to upgrade your car stereo you can still have an audiophile sound system in your vehicle, and we are certain that you can find a local car stereo installation place Temple, TX that it up to the task. We want to make this process easier be offering you the best deals on car stereo in or near Temple, TX. From Better Car Stereo Single DIN to Car Audio Speaker 6X9 we got you covered. It is often said that music is life and at ThunderEletronics.Net we want to be your best option if searching for Pioneer Subwoofers in Temple, TX.