Car Audio Amplifier Monoblock in Logan, UT
If you’re looking Car Audio Amplifier Monoblock in Logan, UT, you should consider our car audio store. The main reason thousands of audio enthusiasts visit our site every day looking for things like car audio RCA cables is not because we are the largest but because car stereo enthusiast into DIY car audio installation knowt that our car audio shop offers a wide selection of everything from car speakers, car amps and car stereos to MP3 decks and subs.
Whether you’re looking for Car Audio Amplifier Monoblock Logan, UT or 12-Inch Car Subwoofer we are sure you’ll find our collection adequate. That is because at ThunderEletronics.Net we put a lot of effort selecting the products we sell so that you have the easiest car stereo installation experience and a top notch car audio system you will love and your friends would want to buy. So, tell all your friends for Car Audio Amplifier Monoblock in Logan, UT check out Thunder Eletronics for great prices and top brands for Car Audio Amplifier Monoblock in Logan, UT or 10-Inch Car Subwoofer Box we’re sure you’ll happy with the seletion at ThunderElectronics.Net. For the best prices on car audio crossovers and quick expedited shipping, and no games you can count on ThunderElectronics.Net!
Best Selling Car Audio Amplifier Monoblock Near Logan, UT
- MINI Monoblock Amplifier - 1 Channel 2600 watts at 1 Ohm TRUE RMS certified at full range output Digital Class D Brazilian Technology
- A small footprint mini heavy duty heatsink make this micro amplifier easy to install anywhere in vehicles, motorcycles, 4-wheelers: Sizing: 8.50″ Width x 5.90″ Length x 2.60″ Height.
- Its wide frequency response allows you to use it in many different applications, such as subwoofers, midbass, midrange, full range speakers, phenolic drivers, titanium drivers, and super tweeters, among...
- The MDX2500.1 Amplifier is ideal for motorsport applications such as custom motorcycles, ATVs and Slingshots!
- Features 12dB/Oct High Pass 20Hz-80Hz 12dB/oct Low Pass 80Hz-20kHz Heavyweight DD Aluminum Chassis Set Screw Power and Speaker Terminals Remote Gain Control 0 AWG Power Terminals
- Specifications Operating Voltage: 9 - 16 Test Voltage: 14.4 Input Channel(s): 2 Output Channel(s): 1 Continuous Wattage @2ohm: 2200 Continuous Wattage @1ohm: 3000
- Max Current Draw (Amps): 300 RCA Input Voltage Sensitivity: 6 - 0.25 RCA Input S/N: >95 Damping Factor: >100 THD:
- Frequency Response (Hz): 20 - 20k Sub-Sonic Filter: 20 - 80 Low-Pass Filter: 80 - 20k Remote Control: Remote Included in Box Power Wire Gauge: 0 Speaker Wire Gauge: 4
- 1 ohm minimum impedance Class D monoblock operation
- 1,600 watts max power
- 350 watts RMS x 1 at 4 ohms
- 600 watts RMS x 1 at 2 ohms
- Monoblock class A/B, MOSFET power supply
- High and low level inputs
- Variable low pass crossover, switchable bass boost
- Include remote subwoofer control
- Max Output Power: 1500W
- RMS Power 4 Ohms: 120W x 1
- RMS Power 2 Ohms: 200W x 1
- Signal to Noise Ratio: 10 Hz-180 kHz
- Class D Full Range Amplifier
- Hybrid Aluminum Alloy Heatsink for Optimum Dissipation
- 2-ohm Stereo & 4-ohm Bridged
- MOSFET Power Supply with Audiophile Grade IR Transistors
- The Big Boss Bass line features Multi-Impedance amplifiers with 108 RGB LED effects, exclusive technology, and operates between 0.5~2 Ohms.
- The Big Boss 5 Bass has 5,000 Watts RMS rated at 0.5~2 Ohms, in addition to being a monoblock amplifier, this product contains Taramps' exclusive Smart Technology.
- The Positive/Negative power supply cable is 2x 2/0 AWG. The output cables wire gauge are 7 AWG and the remote cable is 18 AWG. 230A circuit breaker or a fuse is recommended.
- Designed for subwoofers, this amplifier offers excellent low-frequency performance and includes features like Crossover, Input/Output settings, Gain Control, Bass Boost, and compatibility with the Taramps...
- Under or In-Dash mountable.
- Adjusts two seperate amplifier's output level at the same time from one control knob.
- The Taramps Bass line amplifiers was developed to provide outstanding power and efficiency for subwoofers. These monoblock amplifiers was engineered to enhance sub-bass and bass frequencies.
- The Bass 1200 amplifier offers exceptional performance and versatility, with an impressive 1200 Watts RMS output power at 1, 2, or 4 Ohms. Its compact design includes both RCA and High-level inputs.
- The Positive/Negative power supply cable is 5 AWG. The output cables wire gauge are 11 AWG and the remote cable is 18 AWG. 65A circuit breaker or a fuse is recommended.
- Designed for subwoofers, this amplifier offers excellent low-frequency performance and includes features like Crossover, Input/Output settings, Gain Control, Bass Boost, and compatibility with the Taramps...
- The Taramps Bass line amplifiers was developed to provide outstanding power and efficiency for subwoofers. These monoblock amplifiers was engineered to enhance sub-bass and bass frequencies.
- The Bass 1200 amplifier offers exceptional performance and versatility, with an impressive 1200 Watts RMS output power at 1, 2, or 4 Ohms. Its compact design includes both RCA and High-level inputs.
- The Positive/Negative power supply cable is 5 AWG. The output cables wire gauge are 11 AWG and the remote cable is 18 AWG. 65A circuit breaker or a fuse is recommended.
- Designed for subwoofers, this amplifier offers excellent low-frequency performance and includes features like Crossover, Input/Output settings, Gain Control, Bass Boost, and compatibility with the Taramps...
- F1-5000 does 5000 watts RMS @ 1 Ohm
- F1-5000 does 3600 watts RMS @ 2 Ohm
- High Output Full Bridge Amplifier
- BASS KNOB purchased SEPARATELY
- Powerful Subwoofer Amplifier: The RX2 250.1 monoblock amplifier delivers a clean 250 watts of power to your subwoofer with efficiency.
- Built to Last: Featuring heavy-duty heatsinks, robust unregulated power supplies, and oversized direct input power and speaker terminals for legendary reliability.
- Convenient Bass Control: Includes an RX2 bass knob for easy adjustment of your subwoofer's output level.
- Flexible Installation: The removable and rotatable name plate allows for orientation adjustment to suit your installation needs.
- Digital Class-D Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 12 dB/Octave - Variable Low Pass Filter
- Digital Class-D Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 12 dB/Octave - Variable Low Pass Filter
- Digital Class-D Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 12 dB/Octave - Variable Low Pass Filter
- Digital Class-D Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 12 dB/Octave - Variable Low Pass Filter
- Digital Class-D Mono Block Amplifier
- Dual MOS-FET PWM Power Supply
- 1 Ohm Stable Load
- 12 dB/Octave - Variable Low Pass Filter
- Ultra-Efficient Class D Design
- Mono-Block Amplifier Capable of 1,500 Watts RMS & 2500 Watts RMS Dynamic Power
- Real Marine ABYC/NMMA-Compliant Power Connections & Conformal-Coated Circuit Board
- KMBLC Remote Level Control Included
- WIDE RANGE OF APPLICATIONS: Our car amplifier is designed for various car audio systems, enhancing the performance of car speakers. It offers convenience and enjoyment by boosting the audio quality in your...
- HIGH EFFICIENCY: This amplifier minimizes power loss, ensuring it operates efficiently. It stores excess energy until needed, preventing unnecessary heat generation. This feature helps in maintaining the...
- ACCURATE MANUFACTURING: Crafted with precision manufacturing techniques and exquisite workmanship, this amplifier guarantees stable performance and high reliability. Its build quality ensures it can...
- DETAILED SPECIFICATIONS: The frequency response of this car audio amplifier ranges from 10HZ to 300HZ. It boasts a signal-to-noise ratio greater than 90dB and a sensitivity between 0mV and 6V. For optimal...
Last update on 2024-08-01 / Images Source Amazon Product API
Post Related to Car Audio Amplifier Monoblock in Logan, UT.
Is DS18 Audio a Good Brand?
Over the years, DS18 has grown from a small distribution center to a multinational company worth millions of dollars. They've done this by [...]
GMC & Chevy Truck Audio Systems Upgrade
If you commute to work, getting stuck in traffic at some point in time is almost unavoidable. As a matter of fact, [...]
How Reasonable is AudioControl?
AudioControl has existed for up to 40 years and has been a leading brand in car audio. They were the pioneers of The [...]
What is an Audiophile Car Stereo System?
Before we dive into what makes an audiophile car audio system, I think we need to define what an audiophile is. Audiophile is the term used to describe high-fidelity sound reproduction enthusiastic seeking to reproduce the sound of the original performance. To achieve that, the audio system needs to have a good phase correlation between the drivers, low distortion, and a flat frequency response that covers the entire human hearing spectrum of 20 Hz to 20,000 Hz.
However, the audio system may NOT be considered an audiophile quality even when these things are present. That is the case for many premium car stereo systems. Yes, they have lower distortion than the base models. Yes, they play from 20 Hz to 20,000 Hz. Nevertheless, they almost always seem to lack the ability to reproduce a realistic soundstage and image. That is because better speakers can improve the overall performance of the sound system, but they can’t make up for bad speaker location. Whether it is a base system or a premium one, automakers will use the exact speaker location, and this, my friends, is usually to blame for the lack of a realistic soundstage and imaging.
An audiophile car stereo system does not have to be loud despite popular beliefs! In fact, when you listen to music really loud, your ears will start to shout down, and you will not be able to hear small details in the recording. On the other hand, accurate is one thing an audiophile car stereo system is! This is why driver selection is so crucial in car stereo and DIY home audio as well!
An Audiophile Car Stereo System
There are few audiophile car stereo systems around because even though they are not impossible, it is not easy to build and design one. A lot has to do with the consumer’s lack of education and demand. If automakers can get away with $5 Chinese speakers, why would they opt for a $50 German or Japanese one? Another myth is that an audiophile car audio system needs to have 15 to 30 speakers, as seen in the new DSP system found on the new Acura NSX. Nothing could be further from the truth. In fact, the new Acura NSX system is TRUE garbage if you ask me! DSP reverb and over accentuated decays are as far from audiophile car stereo systems as you can get!
A top-notch audiophile car stereo system can have as little as six speakers, as demonstrated by Richard Clark and Dave Navone on the seven-time world champion SpeakerWorks Buick Grand National. The sound system I am building on my 2022 Ford Maverick will have two dual concentric drivers, two midbass drivers, and one sub! The vehicle has two waveguided midrange tweeters, two midbass drivers, and one subwoofer. That is all that is needed to achieve audiophile sound quality in a car stereo system.
The key to this sound system is the custom build, fiberglass, kick panel speaker pods. By placing the midrange and tweeter in the kick panel area, I am able to equalize the distance between the left and right channel, therefore reproducing a more accurate and realistic soundstage and imaging. I will be documenting the process on a YouTube video. Stay tuned for that. In the meantime, remember that more is not necessarily better when it comes to audio, especially car stereo!
Trending Links Related to Car Audio Amplifier Monoblock in Logan, UT.
There is no doubt that when looking for Car Audio Amplifier Monoblock in Logan, UT you have many options. Even though, car manufactuerer’s like Land Rover are making a lot more difficult to install aftermarket car audio you can still have a good sound system in your car, and we are confident that you will be able to find a professional car stereo installation place Logan, UT that it up to the task. At Thunder Electronics we want to help you in this process be offering you the best deals on car stereo in or near Logan, UT. From Better Car Stereo Single DIN to Car Sound Deadening we got you covered. It is often said that music is life and at Thunder Eletronics we want to be your first choice when looking for Car Audio Amplifier Monoblock in Logan, UT.