Car Amp Sale in Beaumont, TX
When you are seeking Car Amp Sale in Beaumont, TX, you have to consider our car audio store. One of the reasons a lot of stereo enthusiasts stop by electronics.net every week searching for things like extreme car audio is not because we are the biggest but because car stereo enthusiast into DIY car audio installation knowt that Thunder Eletronics offers a wide selection of car audio and eletrconics plus great prices.
Whether you are searching for Car Amp Sale Beaumont, TX or Dash Camera For Car Front And Rear we are confident you’ll find our selection impressive. That is because we go to great lengths selecting the products we sell so that you have the easiest car stereo installation experience and a top notch car stereo system you will love and your friends would want to buy. So, tell all your friends for Car Amp Sale in Beaumont, TX stop by Thunder Eletronics for great prices and top brands for Car Amp Sale in Beaumont, TX or Car Stereo Single DIN we are sure you’ll fulfilled with the options at ThunderElectronics.Net. For the best prices on 10-inch car subwoofer and fast expedited shipping, and no games you can count on Thunder Electronics…
Best Selling Car Amp Sale Near Beaumont, TX
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- 4 channels x 375 watts @ 2 ohms
- 4 channels x 185 watts @ 4 ohms
- 2 channels x 750 watts (mono bridged) @ 4 ohms
- Operates in 4-channel stereo, dual stereo bridged, stereo + bridged mono, or dual bridged mono
- 1400 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 1400W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- GOLD-PLATED RCA PORTS: The RCA ports are gold-plated for eliminating signal loss. A subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality audio....
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean, distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Wiring Kit - 30 Ft Speaker Wire, 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable, Competition Quality Fuse Holder with AGU Fuse
- Wiring Kit Continued - 10 5/16" and 1/4" Ring Terminals, 6 ft. Split Loom Tubing, 3 Rubber Grommets, 20 4" Wire Ties, 20 ft. High Performance blue RCA (TRCA) Interconnect
- Amplifier Power - 1100 Watts Max x 1 @2-Ohms, 550 Watts Max x 1 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 4 Channel, strong power dynamic voice restores high degree of sound.
- Aluminium alloy drawing process, slim design, easy to install.
- Great heat dissipation performance, safe and stable.
- Energetic, strong power, easy to promote sub woofer. Nondestructive amplifier installation, 360°round sound.
- 2 Ohm Stable Operation & Soft Turn On Circuit
- Thermal and Speaker Short Protection Circuitry
- Heavy-Duty Aluminum Alloy Heatsink | Class A-B Operation
- Remote Turn-On / Turn-Off Circuit
- 2000 WATT POWER: The Pyle 4 Channel Car Amplifier is perfect for your vehicle's sound system; Gives you up to 2000W bridgeable output; Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss; The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience;...
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection; Has been specially designed from the bottom up to provide safe...
- Power - 50 Watts Max x 2 @4-Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Variable Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- High & Low Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- 4000 WATT POWER: The Pyle Dual Channel Car Amplifier is perfect for your vehicle's sound system. Gives you up to 4000W bridgeable output. Features switchable bass boost, variable gain control, configurable...
- SILVER-PLATED RCA PORTS: The RCA ports are silver-plated for eliminating signal loss. The subsonic filter allows low-end interference to be cut so your speakers will always deliver the highest quality...
- MOSFET PULSE: The MOSFET pulse width modulation power supply allows for a clean distortion-free signal to your compact speakers providing you with crisp and clear audio for an outstanding music experience....
- THERMAL PROTECTION: To keep both your car and the stereo amp safe, this model is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe...
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x...
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4...
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB...
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry....
- 1,700 Peak Amps; 425 Cranking Amps
- Clore PROFORMER Battery Technology
- 68" 2 AWG Welding Cable Leads
- Heavy Duty Powerjaw Clamps
- POWER - 1500 Watts Max x 1 @2-Ohms, 750 Watts Max x 1 @4-Ohms
- MOSFET POWER SUPPLY: A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage and current precisely by removing the output current sensing loss &...
- CLASS A/B TOPOLOGY: Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- VARIABLE LOW-PASS CROSSOVER: Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- The Taramps DS line has Multichannel amplifiers, which are Full Range amplifiers with 2 or 4 channels, and also features high power and cost-benefit.
- The DS 440x4 has 440 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multi-channel amplifier features 4 channels with 110 Watts RMS each (440 watts RMS total) and also with high-level input and automatic activation.
- The Positive/Negative Power Cable is 9 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 50A.
- AUDIO EVOLUTION: This amplifier car audio features excellent frequency response rates and crossover network that place these amps in a class of their own
- SOUND SPECIALIZATION: This high-powered Power Amplifier is cutting edge technology at its finest Nickel-plated RCA connectors and speaker screw-down terminals ensure a secure connection between amplifier...
- INTELLIGENT DESIGN: The amplifier monoblock features include power and protection LED indicators; soft turn-on/off; and 1 channel amp design
- RCA JACKS: The Line-Out jacks allow you to build multiple amplifier systems without having to use splitter cords to distribute the signal This makes it easier to bring one set into the first amp, then use...
- Powerful Performance: The Schumacher SC1361 delivers a 50 cranking amps engine start with a 10-amp boost and 6-amp2-amp charge/maintain modes, which is strong enough to charge car, SUV, truck, and other...
- Microprocessor Controlled: After gathering information from the connected battery, the microprocessor adjusts the charge, allowing fast charging without negatively impacting battery capacity and longevity
- Boost Battery Health: The SC1361 Jump Starter and Battery charger features multi-stage charging and float mode monitoring for optimum battery health and extended battery life
- Advanced Charging Algorithm: Multi-stage charging employs an advanced charging algorithm to maximize battery charge, battery health, and the lifespan of your battery
- Each pack contains 2 units of "For Sale" sign made of plastic
- Size of each sign is 9" x 12"
- Each sign has two lines on it for additional description
- Bright color labels draw customer's eye so that improve selling efficiency
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
Last update on 2024-12-06 / Images Source Amazon Product API
Blog Article Related to Car Amp Sale in Beaumont, TX.
A Comprehensive Guide: Choosing Car Speakers
Introduction People always ask, How do I know what speakers to get for my car? The car audio experience has evolved significantly [...]
Precision Power Car Audio Amplifiers Still Any Good?
I was browsing around AMAZON during PRIME day. I was pleasantly surprised to find an ad and product by the renowned car audio [...]
Do Aftermarket Car Stereos Sound Better?
Car manufacturers give their stereos a limited amount of power. Adding an amplifier can dramatically improve the head unit's output to the [...]
Are JL Subwoofers Any Good?
JL Audio is one of the most notable names in the audio business. You can’t escape them. They make amplifiers, subwoofer systems, OEM interfaces, subwoofer drivers, enclosed systems, and in-wall subwoofers. Doing this, they have been serving different kinds of customers worldwide since 1975, from audiophiles to DJs and music producers. JL Audio is seen as the foremost manufacturer of high-performing audio products for boat, car, and campervan owners.
However, what truly stands out for this brand are its subwoofers. For decades now, it’s been seen as something of a standard in the industry. Flexing its engineering achievement is especially seen in the VXi amplifiers, which are known to combine digital signal processing and high-performance speakers. JL Subwoofers have ranked among the best subwoofers one can get, no matter the price, since their first sojourn into the market with the Fathom and Gotham subwoofers.
JL Subwoofer
There are a lot of subwoofers to pick from, depending on the strength of your pocket. There are the budget-friendly ones that give you more quality for your money and the high-end ultra sleek ones that audiophiles would love. So let us look at some of the best subwoofers that JL has to offer.
The most popular sizes for the JL subwoofers are between 8 to 12 inches and are usually made with three things in mind: space, budget, and bass needs. There are other things such as price and ease of installation, but here we will be focusing on the initial three we mentioned. For the most part, JL Subwoofers really focus on sound quality so much so that no matter how loud you like your music, it would always sound crisp and clean with no distortion. The other thing is the bass. The bass will make you change the way you listen to music forever.
Design
The JL Subwoofers integrate a lot of technologies that have been refined over the years. This is why you would see the subwoofers carry some designs with names such as VRC (Vented Reinforcement Collar), Engineered Lead-Wire System, DMA (Dynamic Motor Analysis), and FCAM (Floating Cone Attach Method). The drivers of the subwoofers usually come with a sealed design and a deep depth. This makes the driver quite massive, almost filling up the cabinet because of the deep motor structure.
The JL subwoofers are also designed to be able to analyze the forces of the driver taking into account the behavior of the system under different power inputs. This way, the performance of the subwoofers is optimized no matter the power input. Additionally, when the sound system in JL Subwoofers are designed, they use the FEA system for good surround geometry for the custom driver.
Installation
JL Subwoofers are known to be quite easy to install, which is why most of their models come with high-value features such as a ground lift switch, 24 dB/octave high-pass filter, and removable plugs.
Conclusion
Most of their products are quite expensive depending on how you look at them, but you will always get your money’s worth.
Trending Searches Related to Car Amp Sale in Beaumont, TX.
There is no doubt that when looking for Car Amp Sale in Beaumont, TX you have many options. Although, car manufactuerer’s like Dodge are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your vehicle, and we‘re confident that you will be able to find a local car stereo installation store Beaumont, TX that it up to the task. At Thunder Electronics we want to make this process easier be providing you the best deals on car stereo in or near Beaumont, TX. From Car Audio Amplifier 2-Channel to Car Audio Speakers 6X8 we have what you are looking for. Many will tell you that music is the best way to change you mood and at Thunder Eletronics we want to be your first choice when searching for Car Amp Sale in Beaumont, TX!