10-Inch Car Subwoofer Box
So you want to add a little bass to your car stereo system but don’t want to have to deal with the bass box building process, no problem here is a selection of the top reviewed 10-inch subwoofer enclosure from across the internet. If you are buying an empty 10-inch subwoofer box, make sure to check the documentation provided with your sub regarding air space needed! No, not all speakers can play in ported, sealed, or free-air applications. Overall the rules are pretty simple. If you are looking for tight, accurate bass, a sealed box is what you will need.
On the other hand, if you are looking for louder, more boomy bass, a bass reflex or ported enclosure is probably what you want to use. If you are new at this, we recommend buying a pre-loaded 10-inch subwoofer enclosure. When you buy a pre-loaded 10-inch subwoofer enclosure, the math has been done for you. All you have to do is plug it in and play! As you get more into car audio, you will be able to make more technical choices, but overall, you can’t go wrong when choosing a 10-inch subwoofer enclosure from a well-known manufacturer like Kicker, Rockford, or Alpine.
- Compatible with 2009 2017 Ford F 150 Super Crew and 2017 Ford F 250 and F 350 Super Duty
- Underseat downfire design saves space
- Finished with durable bed liner
- Air space: 1.0 cubic foot (per sub)
- Competition Grade EVL Series 10-Inch Dual 4-ohm Loaded Subwoofer Enclosure
- Peak Power: 4,000 Watts | RMS Power: 2,000 Watts
- Subwoofers Come Mounted and are Pre-Wired Internally for a 1-ohm Final Impedance Load at the Terminals
- Premium Vented Enclosure Made of High Strength MDF and Finished in Black Carpeting
- Active thin-mount CompRT Subwoofer paired with passive ReFLEX sub for deep bass
- CompRT features Forced-Air Cooling - 20% cooler for increased reliability
- Compact enclosures with tough MDF construction for behind or under the seat
- New for 2017!
- Genuine CompC Subwoofer
- Custom Port Design
- Made Of Heavy MDF
- Model: OutRage100 | Dual 10 Inch 1600 Watt Car Audio Subwoofer Box
- Rear Vented Design for Maximum Bass Output | Power Rating: 2 x 800 Watts Max Power | 1600 Watts Total
- High Powered 10 inch Woofers with a Non-Pressed Paper Cone and Specially Treated Foam Surround with Rubber Edge Suspension | Smooth Carpet Finish
- Voice Coil: 2 inch 4 Layer Dual Voice Coil each woofer | Impedance: 2 Ohms | Magnet: 2 x 40 Ounce each woofer
- Power Rating: 400 Watts RMS / 1200 Watts Max
- Cone Material: Spun Aluminum Cone | Surround Material: High Strength Rubber EPDM Enhanced Surround
- Final Impedance: 4-Ohm | Copper Wound Kapton Voice Coil | Push Type Terminals
- Sensitivity: 95dB | Frequency Response: 30Hz - 500Hz
- SEALED SINGLE 10" WOOFER CAR BOX - Just connect your wires and drop in your woofer and you're ready to roll! The front (where you load your woofer) is flat and the back is slanted
- UNIVERSAL FIT - Measure the space in your vehicle, this box size is (H x L x D) 13" x 14" x 13", 10" woofer hole is 9.125" in diameter and mounting depth is 9.625", enclosure volume is .85 cubic feet
- BUILT TOUGH - High Quality CARB Compliant MDF wood cabinet with .75" think face, black aviation grade carpet, gold binding post, positive and negative, raw wire input connections and arrives Fully...
- SYSTEM REQUIREMENTS - Complete car audio wired system ready for a passive enclosure and raw speaker wire to connect to your woofer
- DUAL 10 INCH SEALED SUBWOOFER ENCLOSURE: The Bbox 10 inch dual sealed Accu-Tuned subwoofer box enclosure is designed for optimum bass response and low frequency reproduction which is ideal for lower...
- SPECIAL FORMULA: We use Aliphatic wood glue on our 10" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 10 inch subwoofer box also gets a second application of glue around all...
- HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable MDF that is 3/4" thick for solid frequency response and accurate music reproduction and we use a CNC Miter to ensure an airtight fit...
- AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying...
- 700 WATT POWER: This high-powered audio projection subwoofer system has a maximum power output of 500-watt peak power / 250-watt RMS so you can play your favorite tracks as loud as you want and with style
- 10" SUBWOOFER: This bandpass automotive speaker enclosure system is equipped with a 10" high power 4-ohm subwoofer for full range stereo sound reproduction and impressive bass response and a blue...
- 2” ALUMINUM VOICE COIL: This car speaker has a 2” high-temperature aluminum voice coil and a 4-ohm impedance rating that compensates for the undersized wire found in most cars. Ultimately reduces...
- RUBBER EDGE SUSPENSION: The high-performance car woofer speaker has a specially treated black rubber edge suspension so the only vibrations you'll hear will come from your music. Completes your existing...
- Universal Fit - Dual Chamber 10" Ported Subwoofer Enclosure
- Competition Grade, High Performance Subwoofer Box | Engineered to Sound Incredible
- Kerf (Rounded) Port Design - Allows for Deep, Accurate, and Responsive Bass
- Internal Volume: 2.70 ft³ | Tuned @ 34 Hz
- Universal Fit 10" Ported Subwoofer Enclosure with Three Independent Subwoofer Chambers
- Each Subwoofer Chamber Features an Advanced Slot Port for Maximum Bass
- Angled, Rear-Firing Design | Gross Internal Volume: 4. 80 ft³
- Ports Located on Bottom of Each Subwoofer Chamber | Tuned at 38 Hz
- Built-in Amplifier - With a MOSFET power supply you get improved switching speeds, better performance with less power from the driver, lower gate-to-drain feedback capacitance, lower thermal impedance for...
- Variable Low-Pass Filter - A low-pass filter is an electronic circuit that removes all the notes above the filter's frequency setting. You will use the Low-pass filter to primarily keep high notes out of...
- High Level Inputs - Speaker level inputs are commonly referred to as high-level inputs. It will be used to connect the LOPRO10 to your factory radio or an aftermarket radio that does not have low-level...
- Low-Level Inputs - Line level inputs (RCA inputs / low-level inputs) use RCA interconnect cables to link the LOPRO10 with the source unit. Most aftermarket radios have multiple pairs of RCA outputs that...
- The Punch P300-10 is a self-contained all-in-one solution featuring a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier
- The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving – Dimensions (Wedge H x W x D1 x D2): 13.3” x 18” x 8.9” x 5.9”
- Featuring an adjustable 12db/Octave low pass crossover, built-in adjustable bass EQ, built-in 0°/180° phase switch and Remote bass level control included
- Closed-loop design ensures optimum performance between woofer, amplifier and enclosure with easy integration in aftermarket or OEM audio systems using RCA or speaker level signals
- Single Vented Chamber Design: QPower's 10 inch subwoofer that ensures easy integration into any sound system; Ideal 10 inch sub box for an amplified car audio experience
- Superior Bass Performance: Designed and Built for the Deepest amplified subwoofer Bass; Media enclosure that provides the most output for your money and space inside your vehicle
- Quality Speaker Box Enclosure: Finished with a black bedliner spray for increased sound box durability, this subwoofer box can withstand the daily wear and tear while maintaining its aesthetic appeal
- Spacious Tough Box Air Space: Features 1.4 cubic feet of air space; Provides the ideal environment for your 10 inch sub or 10 inch subwoofer shallow mount; Allows them to deliver their best performance...
- Compatible with 2002-2012 Dodge Ram Quad Cab trucks, this custom single 10" subwoofer enclosure
- Mounting Depth: 6"
- Air Space: 0.50 Cubic Feet
- Dimensions: Width 19-1/2" x Height 7-1/2" x Depth 13-1/2"
- The High-Amplitude Multi Roll Surround Design allows for extreme excursions without sacrificing valuable cone area.
- More Bass, Less Space - With a compact wedge-style design and shallow mount, the SBT-S10V is a perfect fit for truck applications, with a design that works in small spaces.
- The Alpine logos on the front and the bottom offer convenient visibility options when mounted horizontally or vertically.
- Big Output in a Compact Package with 4 Unique Alpine Subwoofer Technologies
- Kicker 10-Inch 600 watt vented thin profile subwoofer enclosure
- RMS power: 300 watts
- Max power: 600 watts
- Impedance: 4 ohm
- Peak Power Handling: 1000W
- RMS Power Handling: 500W
- Final Impedance: 2 ohms
- Sensitivity (dB 1w/1m) - 85.98
- SINGLE 10 INCH VENTED SUBWOOFER ENCLOSURE: The Bbox 10 inch single vented Pro-Tuned subwoofer box enclosure is designed for optimum bass response and low frequency reproduction which is ideal for lower...
- SPECIAL FORMULA: We use Aliphatic wood glue on our 10" subwoofer enclosures to ensure an airtight seal between all MDF parts. Each 10 inch subwoofer box also gets a second application of glue around all...
- HIGH GRADE MDF: Our subwoofer box enclosures are built with a durable & thick MDF for solid frequency response and accurate music reproduction. Our construction offers a precision fit for our car subwoofer...
- AIRTIGHT RECESSED SIDE PANELS: We use quality materials like our special aliphatic resin wood glue and brad nails from a pneumatic nail gun to create a tight hold on the MDF parts during the glue drying...
- 10-inch subwoofer pre-loaded into a sealed, custom-fit enclosure
- Designed to be pressure fit under the front passenger’s seat rails, no mounting hardware is required
- Trail Ready - Rated at IP66 for protection against total dust ingress and water from any direction
- OEM-grade weather resistant Molex 2-pin connector with pigtail wire harness
- PREMIUM CRAFTSMANSHIP: The ASC DTB2X10-QUAD-UP-RL sub box enclosure showcases premium craftsmanship with meticulous attention to detail. Each element of this enclosure is expertly designed and constructed,...
- SEAMLESS FIT: This enclosure offers versatility in its application, making it suitable for various Dodge Ram models from 2002 to 2015, including Quad and Crew trucks. Its adaptable design allows you to...
- ENHANCED SOUND EXPERIENCE: Engineered to perfection, this Rhino-coated enclosure is tailored to deliver an enhanced sound experience. Its precisely tuned design maximizes the potential of your dual 10"...
- DIMENSIONS: 55 x 15 x 8 Inches
Last update on 2023-12-27 / Images Source Amazon Product API
Here are More Information Related to Car Stereo with Backup Camera