10-Inch Car Subwoofer
Please look at our selection of car audio 10″ subwoofers from the most iconic name in car subwoofers. Although today’s 8-inch car subs are not to be taken lightly, a 10-inch subwoofer takes it up a notch over 8-inch subwoofers. Aside from the piston area advantages in the suitable subwoofer enclosure, a 10-inch sub can create a crisp, tight, punchy bass that makes you feel good about your car stereo system. We probably sell more 10 inch subwoofers than any other size because 10-inch subwoofers offer excellent installation flexibility and, in many cases, super small subwoofer boxes. Don’t matter if you are looking to build a bass reflex, sealed, or bandpass enclosure, you just can’t go wrong with any of the 10-inch subs we sell. Finding the perfect car audio 10-inch subwoofer comes down to three things the size of your vehicle, your bass needs, and your budget. For accuracy, the sealed box is going to give you the best result. These are relatively small and easy to build. Bass Reflex (or ported) enclosures are slightly louder by giving up a little bit of powered handling. Bandpass is a bit more complex yet even louder, but only for a narrow window in the bass region. Which one are you going to choose?
- Peak Power: 1, 600 Watts | RMS Power: 800 watts
- 2.6" (65.5mm) dual 4-ohm high temperature 4-layer copper Voice Coil
- Powerful high flux ferrite motor with advanced air Flow Cooling Design | Fs: 45 Hz
- Engineered for incredibly deep, dynamic, and powerful bass | Sensitivity: 83.5 dB
- 10 in. subwoofer
- 1,200 watts max, 300 watts RMS
- Frequency response: 20 Hz to 900 Hz
- Unique design with just 3-3/8 in. mounting depth
- 1000 WATT POWER: This high powered subwoofer system has a maximum power output of 1000 watt / 500watt RMS for full range surround stereo sound reproduction and impressive bass response so you can play your...
- BUILT TO LAST: Features non-fatiguing rubber suspension, specially designed rubber magnet boot, non-press cone, specially treated foam surround, along with bumped and vented motor construction that keeps...
- DUAL 4 OHM IMPEDANCE: The audio projection subwoofer has 90 dB and dual 4 ohm impedance rating that compensates the undersized wire found in many of today’s cars. It ultimately reduces distortion so you...
- DUAL VOICE COIL: This complete subwoofer features 50 oz magnet structure and 2 inch 4 layer dual voice coil to enhance its performance and can handle higher operating temperatures. it also has spring...
- New for 2017!
- Injection-Molded Polypropylene Cone
- Perimeter Venting for Thermal Management
- Ribbed Polyurethane Surround
- High-Quality Polypropylene Cone. High-Density Foam Surround
- 2" High-Temperature Aluminum Voice Coil
- Power Output (RMS): 300 Watts. Power Output (Peak): 600 Watts
- Frequency Response: 35Hz ~ 2KHz. Impedance: 4 Ohm. Sensitivity: 88dB, 1W/M
- ULTRA-POWERFUL SUBWOOFER FOR CAR & MARINE - The Polk DB1042 DVC 10" Marine Certified Subwoofer is a space-saving sub with 1050W peak power and features a polypropylene woofer cone & a durable Santoprene...
- HARD-HITTING BASS FOR YOUR CAR AUDIO - With Dynamic Balance Technology, a Polk Audio proprietary, this marine subwoofer uses laser imaging to identify the best combination of speaker materials, ensuring...
- SPLASH-PROOF SOUND SYSTEM - Polk DB+ series speakers give thunderous sonic output in freshwater boats, motorcycles, ATVs, and others, as they have IP56 marine certification with coated steel baskets. They...
- WALLET-FRIENDLY POLK AUDIO SUBWOOFER - Experience powerful and smooth bass like never before with this compact subwoofer. Designed with cutting-edge technology and premium materials, this affordable sub is...
- 10-Inch Dual 4 ohm Shallow Mount Subwoofer
- Peak Power: 800 Watts | RMS Power: 500 Watts
- Shallow Mount Design - Mounting Depth: 4.41"
- High Performance Pressed Paper Cone Stitched to Premium Foam Surround
- 10-Inch Dual 4-ohm Car Subwoofer
- Peak Power: 1,200 Watts | RMS Power: 600 watts
- 2.5" 4-Layer High Temperature Copper voice Coil
- High Roll Foam Surround and Competition Grade Pressed Paper Cone
- 10 in. subwoofer
- 1,200 watts max, 300 watts RMS
- Frequency response: 20 Hz to 900 Hz
- Unique design with just 3-3/8 in. mounting depth
- Dynamic Tornado Cone design for more stability during excursion
- Rubber surround
- 8-Gauge push terminals for easy connectivity
- 10 in.
- Car Audio Fanatics wanting big bass can rely on the Rockford Fosgate Prime R2D2-10 Dual Voice Coil Subwoofer
- This 10" Prime Subwoofer rocks 250 Watts RMS / 500 Watts Max power handling and the 2-ohm dual voice coils provide awesome installation flexibility
- The mica injected polypropylene cone, and their stamp-cast baskets with spider venting - typically reserved for more expensive models - keeps the motor running cool while pumping out the bass
- These R2 subwoofers are optimized for sealed and vented enclosures with a required mounting depth of 4.319 inches and a cutout diameter of 9.125 inches
- SUBWOOFER: The Prime R2SD2-10 is a shallow 10" subwoofer, designed for spaces where traditional sized woofers will not fit, but delivers full size bass
- WATTAGE: This 10” subwoofer handles 200 Watts RMS / 400 Watts Max and the 2-Ohm Dual Voice Coil design lets you to wire them in various configurations
- FEATURES: Featuring a shallow motor assembly for tight spaces, injection molded cone for deep bass, dual 12 AWG compression terminals, and an integrated PVC trim ring
- SPECIFICATIONS: SPL (dB @ 1w/1m): 83; Magnet weight: 45 ounce; CEA 2013 compliant
- Dimensions: 11 x 11 x 4 inches
- Impedance: 4 ohms
- Mounting Depth: 4.6 inches, Mounting Hole: 9.2 inches
- Item Weight: 5.7 Lbs.
- The Rockford Fosgate P3S series shallow mount subwoofers deliver Punch, designed to deliver big bass in a tight space, with its low profile mounting depth design
- The Punch P3SD4-10 is a slim 10” 4-Ohm DVC (dual voice coil) subwoofer with 300 Watts RMS / 600 Watts Max power handling and custom 10-AWG nickel plated push terminals
- Featuring anodized aluminum cones and dustcaps, with a unique spider venting design to keep the motor cooler and a new hybrid stamp-cast basket providing super strength while minimizing weight and...
- Optimized for both sealed and vented enclosures {Sealed (Vb): 0.5 cu. ft. (14.1 Liters) / Vented (Vb): 1.0 cu. ft. (28.3 Liters)/ Mounting Depth: 3.50 in. (89.0 mm) / Cutout Diameter: 9.06 in. (230.0 mm)}
- SOLD INDIVIDUALLY | GREAT SOUND BUILT FOR COMPETITION: With a 350oz Double Stack Strontium Magnet Structure, Heavy Duty, Rugged Industrial Textured Cast Aluminum Basket, Over Sized Mirror Image Dual Poly /...
- HIGH PERFORMANCE CAR AUDIO SUBWOOFER: The HIPPOXL104 Subwoofer features Dual Impedance Black Anodized Voice Coil Former with Kevlar Spunlace, Kevlar Fiber Reinforced Non-Pressed Paper Cone with Industrial...
- AMAZING DEEP BASS FOR ITS SIZE: This 10-Inch Subwoofer handles 2000 Watts RMS Dual 4 Ohm to 4000 Watts MAX, 3 Inch Voice Coils. It's truly a Great car Subwoofer at an affordable price!
- CRANK UP THE VOLUME: Are you looking to upgrade your Factory Subwoofer? With our Black Anodized One Piece Pole-Plate for Added Motor Force, Heavy Duty Direct Input Wires Connection to Voice Coils,...
Last update on 2023-12-10 / Images Source Amazon Product API