Car Stereo Amplifier 4-Channel
A 4-Channel Car Stereo Amplifier is the traditional way to upgrade a car stereo system. Today’s high-performing Class-D amplifiers are stable to extremely low loads, and many cases build to run this way. Some 4-Channel Car Stereo Amplifiers can be run not only in 4-channel mode but also as a 2, 3, 5, and even 6-channel using mixed mono configuration. Depending on your application, some of the features to look for on a 4-Channel Car Stereo Amplifier are line-level input, high and low pass crossover, subsonic filter (if adjustable even better), and pass-through for future expansion! Some people say that DSP is a must! I don’t think it is a deal-breaker, and while a nice feature to have, especially if controlled via Bluetooth unless you know what you are doing, tunning a DSP amplifier may be more than you are bargaining. Consider sticking to what works and 4-Channel Car Stereo Amplifier with good reviews from the DIY car audio market segment. Here are some of the best-selling 4-Channel Car Stereo Amplifiers so far this year.
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its...
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.09 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 15 Amp ATO Blade
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged...
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
- Ultra Compact MOSFET Full-Range 4-Channel Class D Car Amplifier
- RMS Power @ 2 Ohms: 140 Watts x 4 Channels (14.4v)
- RMS Power @ 4 Ohms: 100 Watts x 4 Channels (14.4v)
- Crossover Controls: HPF / Full-Range / LPF | Frequency Response: 10Hz - 40kHz
- Class D
- Small, Compact 4.75" Chassis
- Mosfet Pwm Power Supply
- High-level Input
- AMAZING POWER - Capable of 1,200 Watts Max with high efficiency in mind gives you the best of both worlds. You'll have all the power you need while utilizing state-of-the-art technology that requires less...
- WIDE RANGE OF APPLICATIONS - Ranging from 1-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp...
- FULL RANGE AMP - If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges, tweeters, drivers, or coaxial to this full range...
- NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
- Compact size 440 watts 4 channels 2 ohms
- Replaces TS400X4
Last update on 2024-08-03 / Images Source Amazon Product API
- 1000 watts Max power
- Automatic signal Sensing and turn-on
- Variable high Pass filter adjustable bass Boost
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Power - 100 Watts Max X 4 @2-Ohms, 50 Watts Max X 4 @4-Ohms
- Class A/B Topology - Class ‘A’ Amplifiers Have Enormous Amount Of Current Flowing Through Its Output Transistors With No Audio Signal. Class ‘B’ Amplifiers Have No Current Flowing Through Its...
- Full Range - With A Full Range Amplifier You Not Only Have The Option To Run Your Speakers, But Also Your Subwoofers
- Specs - Dimensions: 7.8” x 9” x 2”, Weight: 3.09 lbs., Speaker Impedance: 2 to 8 Ohm, THD @ RMS Output: 0.01%, S/N Ratio: 90 dB, Frequency Response: 12 Hz to 22 kHz, Fuse Quantity: 1 15 Amp ATO Blade
- Channel: 4 channel
- Input and Output Options: RCA input
- Power Output: 400 Watts RMS car audio amplifier
- Impedance Compatibility: 2 Ohm Stable, Full Range, Speakers & Subs
- 500-Watt MOSFET 4-Channel Class A/B Power Car Amplifier
- RMS Power at 2 Ohms: 125 Watts x 4 Channels
- RMS Power at 4 Ohms: 75 Watts x 4 Channel
- User Adjustable Controls: Gain, Variable LPF, HPF, Bass EQ Switch (0, +6, +12 dB)
- 1200 Watts RMS
- 4 channels
- 2 ohms stable
- Compact design
- 180 watts RMS x 2 bridged
- Class AB amp technology
- preamp and speaker-level inputs
- 4 channel amplifier car audio with 110 watts RMS at 2-ohm load x 4-channels (14.4v); 80 watts RMS power at 4-ohm load x 4-channels (14.4v); 160 watts RMS at 4-ohm bridged x 2-channels (14.4v)
- Small footprint and compact chassis makes this amplifier easy to install in any vehicle or 4ch amplifier car audio application; but don’t let the size fool you, this 4ch car amp produces amazing sound...
- MOSFET pulse width modulated power supply, premium components, and proprietary heat dissipation design will ensure the four channel car amplifier runs cool for even the most demanding playlists
- 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection for your car stereo power amplifier
- Premium 4-channel Class A/B amplifier for car audio and stereo systems for powerful speaker performance
- Features remote bass control for customized equalization on playback and precise sound mixing within your system
- Frequency response of 40 hertz, 2 Ohm stable, with a low pass filter of 40250 hertz and high pass filter of 505000 hertz
- Bass boost at 0, 6, and 12 hertz for a rich, deep sound and perfectly balanced levels within your speaker system
- 1000W RMS / 2000W MAX POWER: The Lanzar 2000 watt 4 channel high power MOSFET amplifier is perfect for your car stereo entertainment system. It can give 500 W x 4 output at 4 ohms or 1000 W x 2 bridged...
- MOSFET POWER SUPPLY: This powerful amplifier is equipped with metal oxide semiconductor field-effect transistors to quickly switch from full to non-conduction for high efficiency output
- SHORT CIRCUIT PROTECTION: This 4 ch amp is also equipped with a 2x30 amp maxi type fuse to protect the amplifier and the electrical system of your car from thermal / overload / short circuit conditions
- SLIM SIZE DESIGN: Measuring only 10.63'' W, 1.78'' H, and 14.02'' L, this amplifier has a slim size design and comes complete with all required mounting hardware for easy installation
- 1500W Maximum Power Full-Range Amplifier
- Optimized 150-watt RMS output and a max power output of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying while on the road
- This slim amplifier fits perfectly into any trunk so you can easily connect it to your stereo system
- Our compact (1.5" x 4.25" x 6.75") PBR400X4D is small enough to fit in just about any application but packs a Punch with 400 Watts RMS of power!
- Versatile design can be used in either 2 or 4 channel configurations (RMS Power Output: 50 Watts x 4 @ 4-Ohm or 100 Watts x 4 @ 2-Ohm or 200 Watts x 2 @ 4-Ohm Bridged)
- Ultra efficient Class D full range design produces maximum power with minimal strain on the vehicle's electrical system. A great choice for both mobile installs as well as motorcycles and recreational...
- High level inputs with auto-on feature as well as differential RCA inputs along with selectable fixed 12dbB/Octave Butterworth Crossovers make the PBR400X4D amp compatible with just about any installation
- Ultra Compact MOSFET Full-Range 4-Channel Class D Car Amplifier
- RMS Power @ 2 Ohms: 140 Watts x 4 Channels (14.4v)
- RMS Power @ 4 Ohms: 100 Watts x 4 Channels (14.4v)
- Crossover Controls: HPF / Full-Range / LPF | Frequency Response: 10Hz - 40kHz
- Crunch PX 1000.4 amplifier is ideal for multi-channel systems because it can operate on 4, 3, or 2 channels; Employs Class A B technology to provide greater audio performance
- Powerful vehicle amp with 1000W power output for your car entertainment system; 2 Ohms, 4 by 250 watts 4 Ohms 4 by 125 watts Mono Bridged At 4 Ohms 2 by 5000 watts, Bridgeable at 4 ohms
- Enhance your setup with multiple arms by utilizing the Preamp RCA outputs, allowing you to daisy chain multiple arms effortlessly for an expanded and dynamic audio experience
- Specifications encompass a Pulse Width Modulated power supply, a Slow unmute soft start turn-on, Speaker level inputs, and a Variable high pass filter at 120
- Class D
- Small, Compact 4.75" Chassis
- Mosfet Pwm Power Supply
- High-level Input
- Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply,...
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b...
- Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance...
- Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 875 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part...
- 1,600 watts x 4 channels max power output
- 55 watts RMS x 4 channels at 4 ohms
- 79 watts RMS x 4 channels at 2 ohms
- Designed to power vehicle’s speakers
- AMAZING POWER - Capable of 1,200 Watts Max with high efficiency in mind gives you the best of both worlds. You'll have all the power you need while utilizing state-of-the-art technology that requires less...
- WIDE RANGE OF APPLICATIONS - Ranging from 1-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp...
- FULL RANGE AMP - If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges, tweeters, drivers, or coaxial to this full range...
- NEVER STOP INNOVATING ATTITUDE - DS18 stands out from other brands with our progressive designs and unwavering commitment to delivering the most technologically up-to-date products on the market.
- Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply,...
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b...
- Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance...
- Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 875 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part...
- Compact size 440 watts 4 channels 2 ohms
- Replaces TS400X4
- 520 Watts Max Power
- Automatic signal sensing and Turn-On
- Variable high pass filter
- Speaker level inputs
- Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply,...
- Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b...
- Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance...
- Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 875 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part...
Last update on 2024-07-29 / Images Source Amazon Product API
Here are Additional Information Related to Car Audio Capacitor