Car Audio Amplifier 2-Channel
A Car Audio Amplifier with 2-Channel is a significant first step in upgrading your factory car audio system. That may sound strange to the uneducated eye since most high-performance car stereo systems consist of at least five channels- the left and right, front and rear, plus the sub. However, in the right hands and or with the proper guidance, a two-channel amplifier can power an entire system using a mix-mono configuration. You’ll need a 12mh inductor and two 200mf capacitors to accomplish this. At one time, there were several over-the-counter solutions for this, including the Soundstream PC100 Mixed Mono passive crossover, but over time they have gone away since they could present an unfriendly load to the amp. However, am I surprised that given the low impedance capabilities and efficiency of today’s Class-D car audio amplifiers, they have not made a comeback. With that said, buying a 2-Channel Car Audio Amplifier is still a valuable option to drive your mid and highs or as a bass amp that at a later day can be used to power your mids and highs.
- AMAZING POWER IN AN EFFICIENT PACKAGE - Capable of 1600 Watts Max Power. You'll have all the power you need while utilizing state-of-the-art technology that requires less energy.
- PROTECTION CIRCUITRY – Against Overload, Short Circuit, Thermal, Low Voltage, High Voltage and Reverse Polarity. These Protection Features Are Designed to Protect the Amplifier From Misuse, As Well As...
- PLATINUM FINISH CONNECTIONS – Ensure solid electrical connections that resist corrosion. Fully Variable crossovers promote installation ease and save the cost of outboard crossovers.
- FULL RANGE AMP - If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges, tweeters, drivers, or coaxial to this full range...
- 2-Channel Class A/B Amp – Elevate your car audio with the Pioneer GM-A3702 2-channel amp, delivering louder and clearer sound. Unleash increased power, transforming your listening experience beyond the...
- Maximum Power Output – Power up your music. The GM-A3702 cranks out a strong 500 watts of max power output creating dynamic and impactful sound reproduction, with 60 watts RSM x 2 at 2 ohms (190 watts...
- Efficiency – The Pioneer GM-A3702 boasts a Class AB design, balancing efficiency and performance, ensuring optimal power usage for a reliable audio experience without excessive heat generation.
- Low Distortion – With minimized crossover distortion, this amplifier guarantees a clean and distortion-free audio output, preserving the integrity of the source signal for high-quality sound...
- Optimized 563-watt RMS and a max output power of 1500 watts, you can give your music a huge boost in power that will have you and your passengers partying
- 750 watt maximum power full-range amplifier Compactly built so this amplifier can fit perfectly into any trunk Blaupunkt 750 Watt Monoblock Amplifier
- Stable at 1 ohm | Remote Subwoofer Level Control Included Highly Efficient Heatsink Design allows for Maximum Reliability & Performance of channel: 2/1 Channel
- Featuring 2-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150. Max. Output Power
- This Listing Includes: (1) Amplifier ST2.500D
- 2-ohm Minimum Impedance Operation
- RMS Power 4 Ohm: 75 x 2 RMS Power 2 Ohm: 125w x 2 500w Max Power
- Dimensions: 7-1/2"W x 1.5"H x 3-1/8"D
- 1000 Watts Max Power (240 Watts RMS x 2 @ 2 Ohms)
- Automatic signal sensing and Turn-On
- Adjustable bass boost
- Variable low pass filter
- Alpine 2-Channel Amplifier
- High Efficiency Digital Circuit Design
- Adaptive Feedback Global Modulation Topology
- Variable Bass EQ
- Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way protection, hi/low level inputs, Thermal Protection,...
- Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output...
- Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance...
- Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual channel amplifier for car speakers also provides a 2-way...
- Power - 400 Max x 2 @ 2 Ohms, 200 Max x 2 @ 4 Ohms, 800 Max Bridged x 1 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Power - 100 Max x 2 @ 2 Ohms, 50 Max x 2 @ 4 Ohms
- Full Range - With a Full Range amplifier you not only have the option to run your speakers, but also your subwoofers
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Input Gain Control - The gain control is not for adjusting volume. It simply adjusts the amount of signal that is coming from your receiver and going to your amplifier
- Rockville RXA-T1 1500 Watt Peak/750w RMS 2 Channel Car Stereo Amplifier. CEA Compliant Power Ratings:. 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x...
- RMS Power Ratings. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4...
- High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover. Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB...
- 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry....
- Power - 800 Max x 2 @ 2 Ohms, 400 Max x 2 @ 4 Ohms, 1600 Max x 1 Bridged @ 4 Ohms
- Strapping Capable - You are able to strap two OX2.800 amplifiers and double the power that is being sent to your subwoofer(s). You now have the ability to connect more subwoofers to take advantage of the...
- Variable Bass Boost - With Variable Bass Boost you have the control of exactly how much BASS you want to pump out to your subwoofer(s)
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- The DS line are Full Range amplifiers so it can be wired with subwoofers, woofers, drivers, tweeters, twwo and three-way speakers, in addition, it contains 2 and 4 channel amplifiers with RCA input and...
- The DS 800x2 is 800 Watts RMS rated at 2 Ohms with 2 channels of 400 Watts RMS each and is a FULL RANGE amplifier.
- The Positive/Negative power supply cable is 7 AWG. The output cables wire gauge are 15 AWG and the remote cable is 18 AWG. 60A circuit breaker or a fuse is recommended
- Crossover: HPF 80Hz ~ 2.2KHz (-6dB/8ª) Variable / LPF 80Hz (-12dB/8ª) Fixed and Level control.
- Crossover Frequency: 50Hz - 250Hz - Crossover Slope (dB/oct): 8-10dB/oct
- RMS Power (4 Ohms): 180 x 2
- Frequency Response: 10Hz - 30Hz Signal-To- Noise Ratio: =>96dB - Voltage Supply: 11 - 16V DC - Gain Adjust: 200mV-8V
- RCA Input: 2-Channel - Fuse: 25A x 2
- The Punch P300X2 is a full chassis (2.38” x 7.76” x 9.86”) 2-channel stereo amplifier, that delivers a rocking 300 Watts of RMS Power
- Versatile design for full-range or component systems or can be bridged for use with smaller subwoofers (RMS Power Output: 100 Watts x 2 @ 4-Ohm OR 150 Watts x 2 @ 2-Ohm OR 300 Watts x 1 @ 4-Ohm Bridged)
- RCA inputs can accept both Hi and Low level audio signals without the need of a signal converter
- Featuring Class-A/B topology, on-board Punch EQ with +18dB boost @ 45Hz, variable 12 dB/Oct Butterworth crossovers, and C.L.E.A.N. Set-up
- AMAZING POWER - Capable of 1150 Watts Max with high efficiency in mind gives you the best of both worlds. You'll have all the power you need while utilizing state-of-the-art technology that requires less...
- WIDE RANGE OF APPLICATIONS - Ranging from 2-4 ohms, this amplifier will allow you to use a variety of speakers for your specific application. Never again will you need to worry about having the right amp...
- FULL RANGE AMP - If you are looking for an amplifier that can handle the full frequency range then look no further! Wire the most powerful midranges, tweeters, drivers, or coaxial to this full range...
- Power, Protection & Clipping LED Lights Status Indicator Short Circuit. Thermal, DC Offset and High & Low Voltage Protection
- Class A/B 2 ohms Stable 2-Channel Amplifier
- RMS Power Rating: 4 ohms: 200 watts x 2 channel | 2 ohms: 350 watts x 2 channel | Bridged, 4 ohms: 700 watts x 1 channel
- Total power output: 700 watts
- Pulse Width Modulated MOSFET power supply
- New for 2017!
- Gain Control With "Optimal Input" Indicator
- FIT2 (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- POWER - Pure Class A/B Maximum Power output of 300 Watts. RMS Power Rating: 4 ohms: 40 watts x 2 chan. / 2 ohms: 60 watts x 2 chan. / Bridged: 4 ohms: 120 watts x 1 chan. without RCA preouts Enjoy flexible...
- DESIGN - Built tough and Compact. Easily fits under a seat and is built JVC Tough to last
- SMART AMP - JVC employs a triple protection circuit that will prevent damage due to Thermal, Overload and Speaker Short Protection
- FLEXIBILITY - RCA inputs enable the amp to be installed with a headunit equipped with RCA preouts. Plus, there is a high-level input for connection to your factory radio without RCA preouts Enjoy flexible...
- New for 2017!
- Gain Control With "Optimal Input" Indicator
- FIT2 (Fail-Safe Integration Technology) Circuitry
- Variable 24dB Crossover
- Full-range
- Class-D amplifier
- 2 channels of 125 watts RMS @ 2 Ohms
- Crossover HPF and LPF
- Compact Design - The small footprint chassis allows for installation in space challenged vehicles
- Conformal Coated Circuit Board - Protects against corrosion or circuit deterioration due to exposure to moisture or salt conditions
- Fixed Crossover - High and Low Pass Crossovers Allow Use with Full Range Speakers or Subwoofers
- High and Low Level Inputs - Allows connection to both Speaker and RCA Input signals
- Compact size
- 160 Watts
- 2 ohms
- 155 watts RMS x 2 at 4 ohms (265 watts RMS x 2 at 2 ohms) | 530 watts RMS x 1 bridged output at 4 ohms (750 watts RMS x 1 at 2 ohms) | 1-ohm stable in stereo mode (430 watts RMS x 2 at 1 ohm) | CEA-2006...
- Variable high- and low-pass filters (50-500 Hz or 500-5K Hz) | Variable band-pass filter (50-500 Hz, 500-5K Hz) | Variable bass boost (0-9 dB at 95 Hz)
- Class-AB amplifier design | Thermostat-controlled, progressive-speed cooling fan | Dynamic soft clipping protects speakers from distortion
- Remote level control | Optional High Cap outboard capacitor modules increase power efficiency | Frequency response: 10-25,000 Hz
Last update on 2024-12-04 / Images Source Amazon Product API