Pioneer Subwoofers in Homestead, FL
If you are looking Pioneer Subwoofers in Homestead, FL, you should consider our car audio store. One of the reasons many car stereo enthusiasts visit our website every week searching for things like car audio on sale is not because we are the cheapest but because car audio enthusiast into DIY car stereo installation knowt that Thunder Eletronics offers a wide selection of car amplifier, sub enclosures, head units, and signal processors.
Whether you are looking for Pioneer Subwoofers Homestead, FL or Better Car Stereo Single DIN we know you will find our variety impressive. That is because at Thunder Eletronics we make a great effort researching the products we sell so that you have the easiest car stereo installation experience and a competition ready car stereo system you will love and your friends would want to purchase. So, tell all your friends for Pioneer Subwoofers in Homestead, FL take a look at Thunder Eletronics for great prices and best selling for Pioneer Subwoofers in Homestead, FL or Car Audio Speaker 5.250 Inch we’re sure you will satisfied with the options at our site. For the best selection on 12-inch car subwoofer box and quick expedited shipping, and misleading social media ads you can count on Thunder Electronics…
Best Selling Pioneer Subwoofers Near Homestead, FL
- injection-molded polypropylene/glass fiber/mica cone with elastic polymer/reinforced fiber surround
- power handling: 500 watts RMS (1600 watts peak)
- mounting depth: 6.22"
- Built-in 170 W Max (50 W RMS) Class D amplifier
- 8" x 5-1/4" Rectangular Subwoofer (7" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11" W x 7.87" D x 2.76" H)
- 8 in. subwoofer
- 700 watts max, 250 watts RMS
- Frequency response: 20 Hz to 1.4 kHz
- Unique design with just 2-5/8 in. mounting depth
- GENERAL || * Size : 12 inch || * Continuous Power Handling (RMS) : 600W || * Maximum Peak Power Handling : 2,000 Watt Max Power (600W Nom)|| * Impedance : Dual 4Ω Voice Coil || * Woofer Composition :...
- AUDIO || * Sensitivity (1W/1 m) : 78dB || * Frequency Range : 20 Hz - 4.7 kHz || BUTYL RUBBER SURROUND || Made of a specially blended, highly durable and moisture-resistant compound, butyl rubber keeps the...
- ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP) || Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone – with low mass and high damping, PP...
- To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting...
- 1300W Max Single 12" Sealed Subwoofer Enclosure with Built-In Amplifier Power Handling Peak 1300W / RMS 350W Preloaded with a single 12" Subwoofer Built-in Class D amplifier Sealed enclosure with carpet
- Subwoofer Features Cellulose fiber cone Urethane surround Frequency Response 20 - 125 Sensitivity 114dB
- Amplifier Features Class D amplifier Cross Overs 0-12dB Bass Boost Remote knob included
- Enclosure Features Carpet finish
- Pioneer TS-A250D4 10 Dual 4 ohms voice coil subwoofer
- 10" Glass fiber and mica interlaced injection molded polypropylene (IMPP) cone construction
- Butyl rubber surround and aramid Fiber spider for strength and linearity during high excursion
- Oversized 56 oz Double stacked magnet and vented pole yoke for increased power handling
- 1 100 watts Max power (300 watts nom )
- Built with high bandwidth high output and low distortion 300-watt class D amplifier
- Size 10" cone
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – 10-inch powerful pre-loaded subwoofer with sealed enclosure produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Butyl Rubber Surround - Butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket and quickly dampens cone vibration once the signal has changed or stopped. This results in...
- Aramid Fiber Interlaced Injection Molded Polypropylene (IMPP) - The Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep,...
- Large Diameter Voice Coil and Double Stacked Magnets - The D-Series subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL...
- Dynamic Tornado Cone design for more stability during excursion
- Rubber surround
- 8-Gauge push terminals for easy connectivity
- 10 in.
- 1, 200w Max / 300w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- 3, 000W Max. 1, 000W Nom. Power (Sub)
- 1, 200W Max. 600W Nom. Power (Amp)
- Variable Bass Boost (0 to +12 dB, 40Hz to 100Hz)
- Dual Voice Coil
- 700w Max / 250w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Powerful Bass – This powerful subwoofer and built-in amplifier, the subwoofer produces a dynamic bass response that enhances the audio experience. It adds depth and richness, creating an immersive and...
- Amplified Design - All in one design simplifies installation and space, making it an ideal choice for vehicles with limited space. Built-in amplifier ensures optimal power delivery to the subwoofer,...
- Low-Pass Crossover - Adjusting the crossover point (50Hz – 125Hz), you can customize the subwoofer's output to match your preferences and the characteristics of your audio system. Enables you to achieve...
- Excellent Sound Reproduction - Its high-quality components and precise engineering, it delivers accurate and detailed sound. The design and construction minimizes distortion, for clean and crisp bass...
- Built-in 250 W Max (100 W RMS) Class D amplifier
- 9" x 5-1/2" Rectangular Subwoofer (8" woofer effective surface area)
- Pioneer DIGITAL BASS CONTROL digitally matches the subwoofer output to your listening preference and vehicle interior
- Compact enclosure for installation flexibility (11.75" W x 7.875" D x 3.875" H)
- Passive (non-amplified) design provides system flexibility
- 4ohm Single Voice Coil (SVC)
- Voice Coil Cooling System (VCCS)
- Extended magnet pole for improved linearity
- Pioneer TS-WX130DA Compact 8" x 5. 25" 160-Watt Active Subwoofer with Built-in Amp 8" x 5. 25" woofer ; 160W max
- 50W nominal; Aluminum cone; Urethane surround; Built-in Class D amp; Digital Bass Control tailors frequency response & increases performance with selectable Deep or Dynamic listening modes; Gain
- LPF
- phase & bass modes controllable at remote; Freq resp
- 1, 500w Max / 400w RMS
- 2 ohms Single Voice Coil
- Rubber Surround
- Fully Covered Steel Mesh Grille
- Car-SUV-Truck Amplified Underseat Subwoofer 160W
- Flat active subwoofer
- Easy to install for example under the seat
- Frequency response 40 to 200 Hz
Last update on 2024-08-03 / Images Source Amazon Product API
Article Related to Pioneer Subwoofers in Homestead, FL.
Revealing the Secrets Of a Good Car Speaker
As we spend more time in our cars, the importance of a high-quality audio system becomes increasingly apparent. Whether you're a music [...]
Is an Aftermarket Car Stereo Worth It?
In the world of automotive customization, the car stereo system holds a special place, acting as the auditory gateway to a driver's world. [...]
Are 2 x 10-Inch Subs Louder Than 1 x 12?
In the world of car audio and home theater systems, the quest for powerful and impactful bass is a never-ending journey. Audiophiles [...]
What is an Audiophile Car Stereo System?
Before we dive into what makes an audiophile car audio system, I think we need to define what an audiophile is. Audiophile is the term used to describe high-fidelity sound reproduction enthusiastic seeking to reproduce the sound of the original performance. To achieve that, the audio system needs to have a good phase correlation between the drivers, low distortion, and a flat frequency response that covers the entire human hearing spectrum of 20 Hz to 20,000 Hz.
However, the audio system may NOT be considered an audiophile quality even when these things are present. That is the case for many premium car stereo systems. Yes, they have lower distortion than the base models. Yes, they play from 20 Hz to 20,000 Hz. Nevertheless, they almost always seem to lack the ability to reproduce a realistic soundstage and image. That is because better speakers can improve the overall performance of the sound system, but they can’t make up for bad speaker location. Whether it is a base system or a premium one, automakers will use the exact speaker location, and this, my friends, is usually to blame for the lack of a realistic soundstage and imaging.
An audiophile car stereo system does not have to be loud despite popular beliefs! In fact, when you listen to music really loud, your ears will start to shout down, and you will not be able to hear small details in the recording. On the other hand, accurate is one thing an audiophile car stereo system is! This is why driver selection is so crucial in car stereo and DIY home audio as well!
An Audiophile Car Stereo System
There are few audiophile car stereo systems around because even though they are not impossible, it is not easy to build and design one. A lot has to do with the consumer’s lack of education and demand. If automakers can get away with $5 Chinese speakers, why would they opt for a $50 German or Japanese one? Another myth is that an audiophile car audio system needs to have 15 to 30 speakers, as seen in the new DSP system found on the new Acura NSX. Nothing could be further from the truth. In fact, the new Acura NSX system is TRUE garbage if you ask me! DSP reverb and over accentuated decays are as far from audiophile car stereo systems as you can get!
A top-notch audiophile car stereo system can have as little as six speakers, as demonstrated by Richard Clark and Dave Navone on the seven-time world champion SpeakerWorks Buick Grand National. The sound system I am building on my 2022 Ford Maverick will have two dual concentric drivers, two midbass drivers, and one sub! The vehicle has two waveguided midrange tweeters, two midbass drivers, and one subwoofer. That is all that is needed to achieve audiophile sound quality in a car stereo system.
The key to this sound system is the custom build, fiberglass, kick panel speaker pods. By placing the midrange and tweeter in the kick panel area, I am able to equalize the distance between the left and right channel, therefore reproducing a more accurate and realistic soundstage and imaging. I will be documenting the process on a YouTube video. Stay tuned for that. In the meantime, remember that more is not necessarily better when it comes to audio, especially car stereo!
Top Searches Related to Pioneer Subwoofers in Homestead, FL.
There is no doubt that when looking for Pioneer Subwoofers in Homestead, FL you have many options. Although, car manufactuerer’s like Saab are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your vehicle, and we‘re sure that you can find a professional car stereo installation store Homestead, FL that it up to the task. We want to make this process easier be providing you the best deals on car audio in or near Homestead, FL. From Car Stereo Single DIN to Car Audio Speaker 5.250 Inch we have what you are looking for. Many will tell you that music is the best medicine there is and at ThunderEletronics.Net we want to be your best option when searching for Pioneer Subwoofers in Homestead, FL!