Car Audio Amplifier 2-Channel in Lehi, UT
When you’re seeking Car Audio Amplifier 2-Channel in Lehi, UT, you need to consider Thunder Eletronics. One of the reasons many audio enthusiasts stop by our site every day looking for things like car audio subwoofers is not because we are the biggest but because car stereo enthusiast into DIY car stereo installation knowt that our car audio outlet offers a wide selection of everything from car speakers, car amps and car stereos to MP3 decks and subs plus great prices.
Don’t matter if you’re searching for Car Audio Amplifier 2-Channel Lehi, UT or Car Audio Tweeters we are sure you will find our variety suitable. That is because we put a lot of time and effort researching the products we offer so that you have the easiest car audio installation experience and top rated car audio system you can be proud of and your friends would want to buy. So, tell all your friends for Car Audio Amplifier 2-Channel in Lehi, UT stop by Thunder Eletronics for great prices and lastest technology for Car Audio Amplifier 2-Channel in Lehi, UT or Car Stereo Single DIN we are sure you’ll satisfied with the variety at our website. For the best prices on 15-inch car subwoofer and fast expedited shipping, and no six for a nine games you can count on Thunder Electronics…
Best Selling Car Audio Amplifier 2-Channel Near Lehi, UT
- The Taramps HD 2000 delivers 2000 Watts RMS and features exceptional flexibility. This monoblock amplifier now includes compatibility with the Monitor Level Remote for added convenience.
- The power cable is 4 AWG, the output cables are 11 AWG, and the remote cable is 18 AWG. For optimal protection, use a 115A circuit breaker or fuse.
- The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- The Positive/Negative Power Cable is 11 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 20A
- The TS 800x4 is a full-range amplifier with 800 Watts RMS at 2 Ohms, delivering 200 Watts RMS per channel across 4 channels.
- For the TS 800x4, use a 7 AWG cable for the positive/negative power supply, 15 AWG for the output cables, and 18 AWG for the remote cable. A 40A circuit breaker or fuse is recommended.
- The Pro 2.4s is a 4-channel digital audio processor that features multi-filter crossover capabilities and a 15-band graphic equalizer.
- The product features 12 equalizations (both pre-defined and parametric), clip indicators, a remote signal output, an audio generator, and RCA and high-level inputs.
- The TS 400x4 has 400 Watts RMS at 2 Ohms. As a versatile multichannel amplifier, this powerful amplifier offers the flexibility of bridged connections
- This multichannel amplifier features 4 channels with 100 Watts RMS each (400 watts RMS total) and also with high-level input and automatic activation.
- The Positive/Negative Power Cable is 11 AWG | The Output Cables Wire Gauge is 15 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 20A
- Perfect for various car audio setups, this perfect amplifier comes equipped with a fixed Crossover, Input/Output settings and a precise Level Control.
- High-end graphics card class cooling fan, IC cooling system temperature control, when the temperature exceeds 25 degrees automatically turn on the fan, very calm.
- The imported TDA7850H chip has both sound quality and volume.
- 50W x 4 super power, easy to push 10 inch speakers.
- Effectively suppress other noise sources to make the sound quality clearer.
- ✿2.1 channel power amplifier board✿ Using TDA2030A, 2.1 sound channel, output power 20W*2+30W.
- ✿ Bookshelf speaker audio amplifier board ✿ New designed, output of left and right sound channels, adjustable volume.
- ✿Good heat dissipation performance✿ High and low sound output, with cooling fin, good heat dissipation performance.
- ✿Good material✿ Made of printed circuit board material, sturdy, and long service life.
- Onboard LM386 chip, 200 times gain circuit design, on‑board speaker wire holder.
- The main pins of the chip have been led out, you can directly input audio signals.
- On‑board 10K variable resistor, you can adjust the amplification volume.
- Good‑quality PCB materials, with good mechanical and electrical properties.
- This amplifier board adopts TDA7498 as the main chip, supply voltage range 12-24VDC.
- 100W+100W high output power digital amplifier.
- Dual channel stereo, excellent sound quality.
- uilt-in 4.1 module, signal transmission distance up to 10m.
- Automatic switching: The audio board receiver automatically switches to pairing mode after switching on. You can easily connect quickly and save time
- connection: Supports all stereo input versions of the connection. 4.0 channels Digital Stereo Audio Receiver Board Amplifier Module.
- sound: Sound quality is good, great power. Fluid sound, not blocked, for a very comfortable music experience
- Easy to use: The switch is convenient and can directly adjust the gain of the power amplifier
- [Premium Chip] This digital amplifier board uses for TPA3116D2 high performance digital chip, one piece for the left channel and one piece for the right channel.
- [Dual Channel] The sound digital power amplifier board supports 100W (left channel) and 100W (right channel) dual channel full range power amplification output.
- [Multi Function] A digital amplifier board using DC single power supply 12‑24V, with 2 kinds of sound input interfaces, with preamp, with adjustable volume potentiometer.
- [Power Supply] With wide working voltage, efficiency of more than 90 percent, power saving. Can use switch power supply, laptop switch power supply, rechargeable battery, car power supply, etc.
- [Powerful chip] Professional chip sets provide superior performance in the system.
- [Good material] The products are made of materials, which can effectively avoid and wear and are .
- [Fine processing] Precise notches and interfaces ensure applicability.
- [Easy to install] Suitable for installation locations, and easy installation.
- This boost/ module can step up or step down voltage and maintain a stable output voltage.
- Input voltage DC 5V to 30V, adjustable output voltage DC ±5 -24V.
- Adopting advanced microprocessor, it can accurately adjust output voltage and current.
- High power, stable performance.
- Small and easy to operate, the audio amplifier can be used at home and easily carried to the car.
- The whole machine is an all-aluminum body, blasting fine sand anodized black, showing the texture. The surface adopts a wiredrawing oxidation process.
- This is a mini 2.0-channel with a backlight LCD display. Supports 40W+40W rated power output which lets you drive 1 pair of speakers.
- The remote controller allows you to change audio settings from a distance, making you less tired and more comfortable.
- "GENERAL || Brand : BANDA Audioparts || Model Number : VIKING5000.2 || UPC : 7898713132063 || BANDA 5000 WATT 2 OHM CAR AMP || "
- "TECHNICAL SPECIFICATIONS || * Amplifier Class D || * Total Power 14.4 @ 2 Ohms: 5500 WRMS || * Total Power 14.4 @ 4 Ohms: 3600 WRMS || * Total Power 12.6 @ 2 Ohms: 5000 WRMS || * Total Power 12.6 @ 4...
- " * Input Voltage: 9 to 15V || * Input Impedance: 100K Ohms || * THD+Noise: less than 1% || * Input Sensitivity: 50mV to 2V || * SNR: 93dB || * Frequency Response (Key OFF): 5 to 5KHz (-3dBs) || *...
- " * Bass Bosst @ 45Hz: Variable 0 to +18dBs || * HPF (Subsonic): 20 to 80Hz @ 12dB/octave Linkwitz-Riley || * LPF (Crossover): 80 to 5kHz @ 12dB/octave Linkwitz-Riley || * Recommended Fuse: 250 A || *...
- "GENERAL || Brand : BANDA Audioparts || Model Number : VIKING5000.1 || UPC : 7898713132056 || BANDA 5000 WATT 1 OHM CAR AMP ||
- "TECHNICAL SPECIFICATIONS || * Class D || * Total Power 14.4 @ 1 Ohm: 6200 WRMS || * Total Power 14.4 @ 2 Ohms: 4300 WRMS || * Total Power 12.6 @ 1 Ohm: 5500 WRMS || * Total Power 12.6 @ 2 Ohms: 3600 WRMS...
- " * Efficiency @ 2 Ohms: 77% || * Efficiency @ 1 Ohm: 67% || * Input Voltage: 9 to 15V || * Input Impedance: 100K Ohms || * THD+Noise: less than 1% || * Input Sensitivity: 40mV to 2V || * SNR: 90dB || *...
- " * HPF (Subsonic): 20 to 80Hz @ 12dB/octave Linkwitz-Riley || * LPF (Crossover): 80 to 5kHz @ 12dB/octave Linkwitz-Riley || * Recommended Fuse: 250 A || * Current at Rest: 3.5 A || * Average Current Draw...
- Fitment:for Jeep,for TJ 1997-2003,for Wrangler 1997-2003
- Location: Complete Inside Window Channel
- Part Number:55175226,55175226AB,CH1394110,D1012
- Feature: Fits Either the (Driver) or (Passenger) Side Front Door
- Fitment:for Chevy,for G10 1979-1995,for G20 1979-1995,for G30 1979-1996;for GMC,for G1500/G2500 1979-1995,for G3500 1979-1996
- Location: Front,Left,Right
- Part Number:KG1003
- Quantity:Pair
- Adjustable Equalization: This 7 band sound equalizer features adjustable bands at 50Hz, 125Hz, 315Hz, 750Hz, 2.2kHz, 6kHz, and 12kHz, allowing you to fine-tune your audio from -12 to +12db. The subwoofer...
- Powerful Outputs: Enhance your in-car sound experience with 6 channel front, rear, and subwoofer auxiliary stereo outputs. This car amplifier ensures that your speakers receive a strong but clear signal,...
- CD and AUX Inputs: This graphic equalizer allows for CD and AUX (2 channel) inputs with a gain knob to adjust the AUX volume. The CD and AUX input buttons offer flexible switching between modes, making it...
- Multi-Function Controls: The 7 band equalizer offers flexible controls including subwoofer volume control, subwoofer frequency control, fader control, and various Hz controls. These features provide...
- Power @ 4Ω: 4 X 130 WRMS Power @ 2Ω: 4 X 198 WRMS Power @ 1Ω: 4 X 300 WRMS Bridge Power @ 4Ω: 2 X 396 WRMS Bridge Power @ 2Ω: 2 X 600 WRMS
- Operating Voltage: 8V – 16V Current Draw (Music): 49 A Current Draw (Max): 99 A Recommended Fuse (Music): 60 A Total Efficiency: 84% Damping Factor: 200
- Frequency Response (-3dB): 5Hz – 22kHz SNR: 88dB Crossover HPF: 45Hz – 850Hz Crossover LPF: 45Hz – 850Hz THD + N (10% Rated Power): 0.1%
- Product Dimensions: 6.5 x 5.8 x 2.4 in Product Dimensions: 16.6 x 14.9 x 6.2 cm
- Features Power @ 4Ω: 4 X 262 WRMS Power @ 2Ω: 4 X 396 WRMS Power @ 1Ω: 4 X 600 WRMS Bridge Power @ 4Ω: 2 X 792 WRMS Bridge Power @ 2Ω: 2 X 1200 WRMS
- Operating Voltage: 8V – 16V Current Draw (Music): 104 A Current Draw (Max): 208 A Recommended Fuse (Music): 120 A Total Efficiency: 80%
- Operating Voltage: 8V – 16V Current Draw (Music): 104 A Current Draw (Max): 208 A Recommended Fuse (Music): 120 A Total Efficiency: 80%
- Product Dimensions: 8.9 x 5.4 x 2.2 in Product Dimensions: 22.7 x 13.6 x 5.5 cm
- Power @ 4Ω: 1 X 1307 WRMS Power @ 2Ω: 1 X 1980 WRMS Power @ 1Ω: 1 X 3000 WRMS
- Operating Voltage: 8V – 16V Current Draw (Music): 121 A Current Draw (Max): 242 A Recommended Fuse (Music): 140 A Total Efficiency: 86%
- Damping Factor: >3000 Frequency Response (-3dB): 5Hz – 25kHz SNR: 92dB Crossover HPF: 5Hz – 40Hz Crossover LPF: 50Hz – 500Hz THD + N (10% Rated Power): 0.1%
- Product Dimensions: 9.0 x 5.4 x 2.2 in Product Dimensions: 22.9 x 13.6 x 5.5 cm
Last update on 2024-08-02 / Images Source Amazon Product API
Post Related to Car Audio Amplifier 2-Channel in Lehi, UT.
Is BOSE the Best Sound System for Cars?
When BOSE was made, it wasn't just about making a quick buck and cashing out. It was about innovation and forming a community [...]
Aftermarket Stereos vs. Factory Ones
In the fast-evolving world of automotive technology, one of the most debated topics among car enthusiasts and audio aficionados is the comparison [...]
Precision Power Car Audio Amplifiers Still Any Good?
I was browsing around AMAZON during PRIME day. I was pleasantly surprised to find an ad and product by the renowned car audio [...]
Are JL Subwoofers Any Good?
JL Audio is one of the most notable names in the audio business. You can’t escape them. They make amplifiers, subwoofer systems, OEM interfaces, subwoofer drivers, enclosed systems, and in-wall subwoofers. Doing this, they have been serving different kinds of customers worldwide since 1975, from audiophiles to DJs and music producers. JL Audio is seen as the foremost manufacturer of high-performing audio products for boat, car, and campervan owners.
However, what truly stands out for this brand are its subwoofers. For decades now, it’s been seen as something of a standard in the industry. Flexing its engineering achievement is especially seen in the VXi amplifiers, which are known to combine digital signal processing and high-performance speakers. JL Subwoofers have ranked among the best subwoofers one can get, no matter the price, since their first sojourn into the market with the Fathom and Gotham subwoofers.
JL Subwoofer
There are a lot of subwoofers to pick from, depending on the strength of your pocket. There are the budget-friendly ones that give you more quality for your money and the high-end ultra sleek ones that audiophiles would love. So let us look at some of the best subwoofers that JL has to offer.
The most popular sizes for the JL subwoofers are between 8 to 12 inches and are usually made with three things in mind: space, budget, and bass needs. There are other things such as price and ease of installation, but here we will be focusing on the initial three we mentioned. For the most part, JL Subwoofers really focus on sound quality so much so that no matter how loud you like your music, it would always sound crisp and clean with no distortion. The other thing is the bass. The bass will make you change the way you listen to music forever.
Design
The JL Subwoofers integrate a lot of technologies that have been refined over the years. This is why you would see the subwoofers carry some designs with names such as VRC (Vented Reinforcement Collar), Engineered Lead-Wire System, DMA (Dynamic Motor Analysis), and FCAM (Floating Cone Attach Method). The drivers of the subwoofers usually come with a sealed design and a deep depth. This makes the driver quite massive, almost filling up the cabinet because of the deep motor structure.
The JL subwoofers are also designed to be able to analyze the forces of the driver taking into account the behavior of the system under different power inputs. This way, the performance of the subwoofers is optimized no matter the power input. Additionally, when the sound system in JL Subwoofers are designed, they use the FEA system for good surround geometry for the custom driver.
Installation
JL Subwoofers are known to be quite easy to install, which is why most of their models come with high-value features such as a ground lift switch, 24 dB/octave high-pass filter, and removable plugs.
Conclusion
Most of their products are quite expensive depending on how you look at them, but you will always get your money’s worth.
Top Links Related to Car Audio Amplifier 2-Channel in Lehi, UT.
Without a question that when looking for Car Audio Amplifier 2-Channel in Lehi, UT you have many options. Although, car manufactuerer’s like Buick are making a lot more difficult to install aftermarket car audio you can still have a good sound system in your car, and we‘re sure that you will be able to find a professional car audio installation shop Lehi, UT that it up to the task. We want to help you in this process be offering you the best deals on car stereo in or near Lehi, UT. From Car Stereo Single DIN to 12-Inch Car Subwoofer Box we got you covered. Many will tell you that music is life and at Thunder Eletronics we want to be your first choice if searching for Car Audio Amplifier 2-Channel in Lehi, UT…