Car Audio Amplifier Monoblock in Jacksonville, FL
When you’re looking Car Audio Amplifier Monoblock in Jacksonville, FL, you have to consider our car audio store. One of the reasons hundreds of stereo enthusiasts visit our site every week searching for things like car audio sales is not because we are the largest but because audio enthusiast who like to work in his/hers vehicle knowt that our car audio outlet offers a wide selection of car amplifier, sub enclosures, head units, and signal processors.
Don’t matter if you’re searching for Car Audio Amplifier Monoblock Jacksonville, FL or Car Sound Deadening we are pretty sure you’ll find our inventory fulfilling. That is because at ThunderEletronics.Net we put a lot of time and effort cooshing the products we offer so that you have the easiest car stereo installation experience and a top of the line car audio system you will love and your friends will envi. So, tell all your friends for Car Audio Amplifier Monoblock in Jacksonville, FL stop by ThunderEletronics.Net for great prices and latest selection for Car Audio Amplifier Monoblock in Jacksonville, FL or Car Audio Tweeters we’re sure you’ll fulfilled with the variety at ThunderElectronics.Net. For the best selection on car audio amplifier 2-channel and fast expedited shipping, and misleading social media ads you can count on Thunder Electronics!
Best Selling Car Audio Amplifier Monoblock Near Jacksonville, FL
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- 1 channel x 3,500 watts @ 1 ohm
- 1 channel x 1,750 watts @ 2 ohms
- 1 channel x 875 watts @ 4 ohms
- Operates in mono mode only
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 1000 Watts MAX x 1 @1-Ohm, 500 Watts RMS x 1 @1-Ohm, 350 Watts RMS x 1 @2-Ohms,200 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE500.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono...
- This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is...
- The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is...
- The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
- The HD line offers Monoblock amplifiers that operate at 1, 2, or 4 Ohms, making them perfect for a variety of setups, from subwoofers to tweeters.
- The Taramps HD 3000 delivers 3000 Watts RMS. This monoblock amp offers exceptional flexibility and now includes compatibility with Monitor Level Remote.
- The Positive/Negative Power Cable is 4 AWG | The Output Cables Wire Gauge is 9 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 150A.
- Perfect for various car audio setups, this perfect amplifier comes equipped with a Crossover, Input/Output settings and a precise Level Control.
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- Power - 2000 Max x 1 @2 Ohms, 1000 Max x 1 @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- 2Ω stable; PWM MOSFET Power supply
- RCA and speaker level inputs
- Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
- Full range or LPF mode switch
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Last update on 2024-12-18 / Images Source Amazon Product API
Blog Article Related to Car Audio Amplifier Monoblock in Jacksonville, FL.
How Reasonable is AudioControl?
AudioControl has existed for up to 40 years and has been a leading brand in car audio. They were the pioneers of The [...]
Is Boss Audio a Good Brand?
Suppose you want to get a car stereo and end up coming across the Boss Audio brand; you may end up asking yourself [...]
Where Does Rockford Fosgate Rank Nowadays?
Rockford Fosgate has been one of the leading innovators in the audio industry. Pushing the boundaries of what good sound should be like, [...]
Clarion DSP a Full Digital Sound system
The car audio industry is a constantly changing tech environment, and to be honest, I am not as into car audio as I used to. Clarion was an okay brand back in the day but never an over-the-top leader in technology. While looking for pricing on getting my windows tinted at several audio shops near me, I kept running into Clarion products, some of which are pretty techie and advanced for a brand of such low profile.
One of the most amazing models is the Clarion’s NX706 navigation receiver. Not only does it have a huge and colorful 7-inch touchscreen, but the fact that it has very few buttons around makes it look even bigger. The built-in navigation software powered by iGo Primo gives those with entry-level vehicle navigation maps for most of North America, including Canada as well as Puerto Rico. Unlike cell phone-based navigation be iGo Primo system has over 11 million points of interest, along with 3D mapping that allows realistic views of the terrain you are driving, including buildings and landmarks for many metropolitan areas.
Digital Sound system
Things got pretty interesting when the salesperson approached me and labeled this head unit an audiophile-quality piece! I said to myself this guy is just trying to sell me a radio. He went on to explain that the Clarion NX706 is one of the few head units in the market with a digital optical output. He also explained that you can now build an entire 100% digital sound system with Clarion products.
The way it will work is with the Clarion NX706 as the foundation or a piece and the addition of Clarion’s other digital lineup consisting of a DSP module, self-powered tweeters, self-powered 6 1/2, as well as a self-power 10-inch subwoofer. I said wait a minute. If they are self-powered, they’re not digital. Somewhere along the line, you have to add an amplifier. At this point, I must have looked pretty dumb because the guy looked at me and smiled. He asked to give him a minute as he went to the back and pulled out some literature on the Clarion Z-System.
As he opened the literature, he explained that they are no analog amplifiers but rather a concept developed by Intel called large-scale integration or LSI chip. Each of the six speakers has one of these chips, along with an extremely efficient six-voice coil motor. Furthermore, he went on to show that the only thing connecting the speakers to the DSP module is a twisted 18-gauge cable. Each of the five speakers in the system uses a 100% digital signal to modulate the power supply voltage, which drives the speakers. In effect, the same twisted pair of cables carry the DC voltage along with the digital information. The digital signal is combined directly with the voltage by the LSI chip, and it drives the speaker.
Top Searches Related to Car Audio Amplifier Monoblock in Jacksonville, FL.
Without a question that when searching for Car Audio Amplifier Monoblock in Jacksonville, FL you have many options. Although, car manufactuerer’s like GMC are making a lot more difficult to install aftermarket car audio you can still have a good sound system in your vehicle, and we are certain that you can find a professional car stereo installation store Jacksonville, FL that it up to the task. We want to make this process easier be offering you the best deals on car stereo in or near Jacksonville, FL. From Car Stereo Double DIN & Backup Cam to 12-Inch Car Subwoofer we got you covered. It is often said that music is the best way to change you mood and at Thunder Eletronics we want to be your go-to if looking for Car Audio Amplifier Monoblock in Jacksonville, FL…