Car Audio Amplifier Monoblock Gainesville, FL2024-01-26T17:16:37-04:00

Car Audio Amplifier Monoblock in Gainesville, FL

BUY Alpine: Car audio, speakers, stereo, subwoofers, and amplifiers

If you’re seeking Car Audio Amplifier Monoblock in Gainesville, FL, you should consider ThunderEletronics.Net. One of the reasons a lot of audio enthusiasts visit electronics.net every month looking for things like car stereo single din is not because we are the cheapest but because audio enthusiast who like to work in his/hers vehicle knowt that our car audio outlet has a wide selection of low prices car subwoofers, car amplifiers, car speakers and electronics with FREE shipping.

Don’t matter if you’re searching for Car Audio Amplifier Monoblock Gainesville, FL or 12-Inch Car Subwoofer we are sure you’ll find our selection suitable. That is because at Thunder Eletronics we make a great effort cooshing the products we offer so that you have the easiest car stereo installation experience and a top notch car stereo system you will love and your friends will wish they had. So, tell all your friends for Car Audio Amplifier Monoblock in Gainesville, FL stop by Thunder Eletronics for great prices and best selling for Car Audio Amplifier Monoblock in Gainesville, FL or Car Audio Battery we’re sure you will happy with the seletion at Thunder Electronics. For the best selection on car sound deadening and quick expedited shipping, and misleading social media ads you can count on Thunder Electronics!

Best Selling Car Audio Amplifier Monoblock Near Gainesville, FL

Bestseller No. 1
Skar Audio RP-1200.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 1200W...
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
Bestseller No. 2
BOSS Audio Systems R1100M Riot Series Monoblock Class A/B Car Amplifier - 1100 High Output, Low/High Level Inputs, Hook Up To Subwoofer For Bass
12,456 Reviews
BOSS Audio Systems R1100M Riot Series Monoblock Class A/B Car Amplifier - 1100 High Output, Low/High Level Inputs, Hook Up To Subwoofer For Bass...
  • Power - 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
  • MOSFET Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
  • Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
SaleBestseller No. 3
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote
249 Reviews
Blaupunkt AMP1500M High-End 1500 Watts Monoblock Car Audio Amplifier/Amp +Remote...
  • Blaupunkt 1500 Watt Monoblock Amplifier
  • Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
  • Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
  • Total Harmonic Distortion:
SaleBestseller No. 4
Blaupunkt AMP4000D AMP4000D 4,000-Watt-Max Monoblock Class D Amp with Bass Remote
207 Reviews
Blaupunkt AMP4000D AMP4000D 4,000-Watt-Max Monoblock Class D Amp with Bass Remote...
  • 4,000 watts x 1 channel max power output
  • 2,800 watts RMS x 1 channel at 1 ohm
  • 2,000 watts RMS x 1 channel at 2 ohms
  • 1,000 watts RMS x 1 channel at 4 ohms
Bestseller No. 5
Blaupunkt AMP3000D AMP3000D 3,000-Watt-Max Monoblock Class D Amp
567 Reviews
Blaupunkt AMP3000D AMP3000D 3,000-Watt-Max Monoblock Class D Amp...
  • 3,000 watts x 1 channel max power output
  • 198 watts RMS x 1 channel at 4 ohms
  • 396 watts RMS x 1 channel at 2 ohms
  • Designed to power vehicle subwoofer
Bestseller No. 6
CT Sounds CT-1500.1D Compact Class D Car Audio Monoblock Amplifier, 1500 Watts RMS
265 Reviews
CT Sounds CT-1500.1D Compact Class D Car Audio Monoblock Amplifier, 1500 Watts RMS...
  • Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v); 850 watts RMS at 2-ohm load (14.4v); 450 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 1500 watt amplifier absolutely pounds
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Bestseller No. 7
Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo
85 Reviews
Car Audio Amplifier ZE1000.1 2000W Monoblock Class D MOSFET Subwoofer Audio, 1-4 Ohm Stable, Low Pass Crossover, Mosfet Power Supply, Stereo...
  • Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
  • 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
  • To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
Bestseller No. 8
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W
980 Reviews
Skar Audio RP-350.1D Monoblock Class D MOSFET Amplifier with Remote Subwoofer Level Control, 350W...
  • Class D MOSFET Monoblock Power Amplifier
  • Peak Power at 1 Ohm: 388 Watts | RMS Power at 1 Ohm: 350 Watts
  • Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
  • Featuring 4-Way Protection Circuitry and 8 AWG Power & Ground Input Terminals for Maximum Current Flow
Bestseller No. 9
ORION Cobalt CBT-4500.1D Amplifier 1 OHM Monoblock Class D 4500 Watts max Music Power car Audio amp
89 Reviews
ORION Cobalt CBT-4500.1D Amplifier 1 OHM Monoblock Class D 4500 Watts max Music Power car Audio amp...
  • By Orion High Performance Car Audio
  • CBT4500.1D Cobalt Series 1-Channel Monoblock Class D Amplifier
  • Watts @ 1 Ohm Mono 14.4V: 1200W
  • Max Music Peak Power: 4500W
Bestseller No. 10
Stinger Audio MT7001 Monoblock Class D Mosfet Power Supply Amplifier with Remote Subwoofer Level Control,700 Watts RMS....
  • Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This mono amplifier was built for driving subwoofers and subwoofer systems, maintaining...
  • Small Footprint and Sturdy Design: Made it precision metal potentiometer for precise tuning and sturdy construction.
  • Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
  • Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Bestseller No. 11
Alpine S-A60M, S Series Class D Monoblock Subwoofer Amplifier, 600 Watts
370 Reviews
Alpine S-A60M, S Series Class D Monoblock Subwoofer Amplifier, 600 Watts...
  • 330 watts RMS x 14 ohms
  • preamp and speaker-level inputs
  • variable bass boost
  • The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
Bestseller No. 12
Lanzar Amplifier Car Audio, Amplifier Monoblock, 1 Channel, 3,000 Watt, 2 Ohm, MOSFET, RCA Input, Bass Boost, Amplifier for Car Speakers, Crossover Network - HTG158.5...
  • MOSFET POWER SUPPLY: This powerful amplifier is outfitted with metal oxide semiconductor field-effect transistors that allow it to quickly switch from full to non-conduction operation for high efficiency...
  • MAX POWER OUTPUT: 3000 watts into a single channel at 2 ohms. Maximum power output of 1250 watts into a single channel at 4 ohms. This amplifier is intended to power your subwoofer(s), giving them the...
  • SLIM SIZE DESIGN: This amplifier has a slim design that makes it very convenient. It comes complete with all necessary mounting hardware for easy installation. This is very portable and lightweight to...
  • VARIABLE BASS BOOST: Variable bass boost makes it easy to customize the low bass within the boost range to your preferences. Enhanced audio and bass, easy to use with user friendly controls. Reliable with...
Bestseller No. 13
Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W
548 Reviews
Skar Audio SK-M5001D Compact Monoblock Class D MOSFET Car Amplifier, 500W...
  • Ultra Compact MOSFET Monoblock Class D Car Amplifier
  • RMS power @ 1 Ohm: 500 Watts x 1 Channel (14.4v)
  • Frequency Response: 15Hz - 270Hz
  • Hi-Level Input Connection: Yes | Signal-to-Noise Ratio (Sensitivity): 85dB
Bestseller No. 14
Amplifier car Audio Monoblock Class D Compact Subwoofer Amplifier, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply
9 Reviews
Amplifier car Audio Monoblock Class D Compact Subwoofer Amplifier, 2/4 Ohm Stable, Low/High Level Inputs, Low Pass Crossover, Mosfet Power Supply...
  • Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
  • Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
  • 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
Bestseller No. 15
Planet Audio PL2000.1M Monoblock Car Amplifier - 2000 Watts, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Great for Subwoofers...
  • 2000 W MAX Power @ 2 Ohm x 1 Channel
  • 1000 W MAX Power @ 4 Ohm x 1 Channel
  • High and Low Level Inputs
  • Variable Low Pass Crossover, Variable Bass Boost
Bestseller No. 16
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control
3,121 Reviews
Planet Audio AC1500.1M Monoblock Car Amplifier - 1500 Watts Max Power, 2/4 Ohm Stable, Class A/B, Mosfet Power Supply, Remote Subwoofer Control...
  • Power - 1500 Max x 1 @ 2 Ohms, 700 Max x 1 @ 4 Ohms
  • Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
  • Mosfet Power Supply - A MOSFET is an electrical switch that allows the flow of electrical current. It controls the output voltage & current precisely by removing the output current sensing loss &...
  • Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
Bestseller No. 17
Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier
345 Reviews
Hifonics ZG-3200.1D Zeus Gamma 3200 Watt Max Power Class D Monoblock Car Audio Amplifier...
  • CLASS D, MONOBLOCK AMP: Deliver powerful sound to your speakers and subwoofers with this class D, 3,200-watt, monoblock car audio amplifier
  • PLENTY OF POWER: Does 3200 watts x 1 channel at 1 ohm, 1600 watts x channel at 2 ohms, and 800 watts x channel at 4 ohms
  • MINIMAL DISTORTION: Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion
  • SECURE CONNECTIONS: Nickel-plated, high-temperature, impact-resistant design with hex screw terminals that allow for secure connections
SaleBestseller No. 18
Power Acoustik OD1-5000D Car Amplifier - Overdrive Series 5000 Watts Max, 1 Ohm Stable Monoblock Amplifier, Car Stereo Mosfet Power Supply Class D Car Audio Subwoofer Amp, 0g Block...
  • Power: 1 Channel Monoblock amplifier delivers 5000 watts max power to a single channel. No need to bridge, this is done internally in this car amplifier. 2000 watts of RMS power to your subwoofers.
  • Strapable Operation: You can double the load by strapping 2 of these monoblock amplifiers to double your power output. These amps are durable and built to deliver monster power to your speakers.
  • Build Specs: The OD1-5000D is built with a Military Grade PCB and with a PWM mosfet power supply. This amp also comes with direct short, thermal, & overload circuit protection to make sure your amplifier...
  • In the Box: In the mono amp packaging you will find mounting brackets, a manual, bass knob and cable and of course a monster of an amplifier. Power Acoustik recommends professional installation and solid...
Bestseller No. 19
CT Sounds CT-2000.1D Compact Class D Car Audio Monoblock Amplifier, 2000 Watts RMS
301 Reviews
CT Sounds CT-2000.1D Compact Class D Car Audio Monoblock Amplifier, 2000 Watts RMS...
  • Car audio amplifier with 2000 watts RMS power at 1-ohm load (14.4v); 1200 watts RMS at 2-ohm load (14.4v); 650 watts RMS at 4-ohm load (14.4v); Frequency response: 0 to 320 Hz (Bass Knob Included)
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application; but don’t let the size fool you, this 2000 watt amplifier absolutely pounds
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
Bestseller No. 20
BLAUPUNKT 1501PRO Car Audio Monoblock 1 Channel 2 Ohm Stable Amp Amplifier 1500 Watts Max | Slim and Compact...
  • Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
  • Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
  • High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists

Last update on 2024-07-31 / Images Source Amazon Product API

Article Related to Car Audio Amplifier Monoblock in Gainesville, FL.

Shopping for Car Audio & Video? BUY car stereos, amps, speakers, subwoofers and GPS.

Choosing the Right Car Audio Crossover

Car Audio Passive & Electronic Crossover

When you hear people talk about car audio, you often hear about head units, amplifiers, speakers, subwoofers, and even car audio batteries and stiffening capacitors. One thing you rarely hear mentioned is the crossover; more often than not, this is a weak link in many car stereo systems. There is no such thing as a car that makes 1000 HP and achieves 100 MPG. Neither is there a speaker that plays 20Hz and 20,000Hz. And yes, when it comes to AUDIO, especially the two-channel audiophile crow that insists that this is possible, but once you put a measuring mic to it, the claims fade away like Joe Biden’s Twitter followers.

The range of the human hearing (20hz – 20khz) is often broken down into three segments when talking about sound reproduction. Those are bass, midrange, and treble, and although there is an upper and lower sub-segment for each, we will stick to those for simplicity’s sake.

If your goal is to build a high-quality car stereo system, you need to consider having a dedicated speaker to play each segment. That is the fundamental principle of an audiophile sound system. You will need a speaker for the bass capable of playing from 20hz to 100hz, this type of speaker is often called a subwoofer. You will also need a speaker that plays from 100hz to 3000hz. That is called a midrange speaker. Last, you will need a speaker that plays from 3000hz to at least 20,000hz. I say at least because it is even better if it plays beyond that. One of the reasons we use choose speakers for each of these frequency ranges is that each can play a given frequency range with excellent efficiency. In other words, a tweeter is not good at playing bass. Neither is a subwoofer at playing treble.

The Role of the Car Audio Crossover

Here is an issue, and that is that the output of the amplifier, for the most part, is full-range (20hz – 20khz). In other words, bass, mid, and high frequencies are all present. Here is where the Car Audio Crossover comes in. The crossover’s role is to split these frequency segments so that each speaker gets the range they are most efficient at playing. That is not as easy as that since there are many different typologies and types. However, regardless of that, there are two things to keep in mind. Those are slope and frequency.

Crossover Slope: In audio, filters are measured in what is known as order. An order equal a 6bd attenuation from the crossover frequency. So if you have a first order or 6db filter at 100hz, the signal will be 6dbs down in amplitude at 200hz. A first-order filter is often not enough to get rid of damaging frequencies, which is why a second-order filter is the most common filter in car audio. Third-order 18db filters are not rare but seen only in tweeters for the most part. Fourth-order 24db crossover is seldom used in car stereo because of phasing issues present in a confined space such as a vehicle.

Crossover Frequency: As previously hinted, the crossover frequency is the frequency where the filter starts to attenuate. Unlike in-home audio, it is not rare to gap the crossover frequencies to attenuate resonance from hard surfaces found in the vehicle. What does this mean? Let’s say that your tweeter and midrange should be crossed at 3500hz. But after taking an RTA measurement, you have a hump center at 4000hz. This is happening because the vehicle is summing the output of the tweeter and midrange. A rookie will try to use eq. A pro would leave the tweeter at 3500hz and take the midrange down to like 3200~3300hz, or until the hump is gone.

Types of Car Audio Crossover

After determining the slope and crossover frequency needed, you must choose a crossover type. And even though audio crossovers come in all shapes, sizes, and prices, they can be grouped into two main categories that being active and passive. The passive crossover requires no power and consist of a combination of inductors, capacitors, and resistors to shape the frequency range a speaker sees from the amplifiers. On the other hand, an active crossover needs to be powered, making it more susceptible to power line noise and distortion. Active crossovers also come in a wide range of typologies. The most common are fixed, programmable, variable, and digital.

Passive Crossover: As the name describe, a passive crossover requires no power. It utilizes coil (inductors), capacitors, and resistors to cut or pass frequencies. Although these are my favorite type of crossover, they are the most hated and misunderstood by the industry. That is because few truly master the design aspect. I like passive crossover because they go beyond filtering frequencies. They are pretty helpful in addressing the electromechanical deficiencies of the driver. Another worth mentioning, passive crossovers can get expensive when you use quality components.

DPS (Digital Sound Processor): These are the latest and greatest, according to some. Yes, DSP crossovers have come a long way not only in affordability but power as well. Most car audio DSP processors nowadays can be controlled via a smartphone app and can take a live sample from the listening environment and make accurate and predictable adjustments. However, they fail to address any electromechanical deficiencies the speakers may show. I think they tend to sound thin, but if you are listening to MP3s, that would not matter anyway.

Variable Electronic Crossover: These are the crossover most people will recognize as an electronic crossovers. Although electronic, it does not utilize a microprocessor. Therefore, for the most part, all signal shaping and filtering are done in the analog domain. These crossovers use pots and sometimes a switch to multiply the frequency. They are very common and affordable, although, as with most things in life, you get what you pay for, so don’t go overly cheap!

Programmable Electronic Crossover: If you are eyeing a high-end electronic crossover, you will likely be looking at a programmable electronic crossover. Rockford Fosgate and AudioControl make the most common pieces in this category. Both companies also employ this technology on their amps. These crossovers use chips or resistors soldered to a small pc board. Programmable electronic crossovers offer better signal-to-noise ratio and broader frequency range and flexibility.

Fixed Electronic Crossover: These electronic crossovers have a fixed frequency and, more often than not, use switches to select highpass, lowpass, bandpass, or bypass. It is rare to find it as a stand-alone unit, but almost a standard option in many amplifiers regardless of cost. Choosing an amp with the right crossover is something to consider.

Popular Searches Related to Car Audio Amplifier Monoblock in Gainesville, FL.

Without a question that if searching for Car Audio Amplifier Monoblock in Gainesville, FL you have many options. Although, car manufactuerer’s like Mazda are making a lot more difficult to install aftermarket car audio you can still have a better than OEM car audio system in your vehicle, and we‘re sure that you can find a professional car stereo installation place Gainesville, FL that it up to the task. We want to help you in this process be offering you the best deals on car audio in or near Gainesville, FL. From Car Stereo Amplifier 5-Channel to Car Audio Speakers 5X7 we have what you are looking for. It is often said that music is the best way to change you mood and at Thunder Eletronics we want to be your first choice if searching for Car Audio Amplifier Monoblock in Gainesville, FL