Car Audio Amplifier Monoblock in Tuscaloosa, AL
When you are looking Car Audio Amplifier Monoblock in Tuscaloosa, AL, you need to consider our car audio store. The reason thousands of stereo enthusiasts visit our site every month searching for things like car stereo repair near me is not because we are the most popular but because DIY car stereo enthusiast knowt that our car audio shop has a broad selection of deals on car stereo and car audio/video products.
Don’t matter if you’re looking for Car Audio Amplifier Monoblock Tuscaloosa, AL or 8-Inch Car Subwoofer we are confident you will find our inventory suitable. That is because at ThunderEletronics.Net we put a lot of effort cooshing the products we offer so that you have the easiest car audio installation experience and a top of the line car audio system you will be happy with and your friends would want to purchase. So, tell all your friends for Car Audio Amplifier Monoblock in Tuscaloosa, AL check out Thunder Eletronics for great prices and lastest technology for Car Audio Amplifier Monoblock in Tuscaloosa, AL or Car Stereo Double DIN we are sure you will pleased with the seletion at our site. For the best selection on 12-inch car subwoofer box and fast expedited shipping, and misleading advertising you can count on Thunder Electronics!
Best Selling Car Audio Amplifier Monoblock Near Tuscaloosa, AL
- Blaupunkt 1500 Watt Monoblock Amplifier
- Max power output: 1500 watts / RMS Output Power Rating: 4 ohms: 120 watts x 1 channel / 2 ohms: 200 watts x 1 channel / Frequency Response: 10Hz - 30kHz
- Signal-To- Noise Ratio: >96 dB / Voltage Supply: 11 - 16V DC / Gain Adjust: 200mV-8V
- Total Harmonic Distortion:
- Power - 2000 Watts MAX x 1 @1-Ohm, 1000 Watts RMS x 1 @1-Ohm, 650 Watts RMS x 1 @2-Ohms,400 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE1000.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,600 Watts | RMS Power at 1 Ohm: 1,200 Watts
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Featuring 4-Way Protection Circuitry and 4 Gauge Power & Ground Input Terminals for Maximum Current Flow. Damping Factor - 150
- 3,000 watts x 1 channel max power output
- 198 watts RMS x 1 channel at 4 ohms
- 396 watts RMS x 1 channel at 2 ohms
- Designed to power vehicle subwoofer
- 330 watts RMS x 14 ohms
- preamp and speaker-level inputs
- variable bass boost
- The amp includes preamp- and speaker-level inputs,you can installin almost any vehicle, even one with a factory radio.
- 4,000 watts x 1 channel max power output
- 2,800 watts RMS x 1 channel at 1 ohm
- 2,000 watts RMS x 1 channel at 2 ohms
- 1,000 watts RMS x 1 channel at 4 ohms
- DIMENSIONS: 10.43" x 9.21" x 2.25", WEIGHT: 4.37 lbs
- SPECS: Monoblock, Class A/B, 2Ω Stable, MOSFET Power Supply, 1100 Max x 1 @ 2 Ohms, 550 Max x 1 @ 4 Ohms
- SPECS CONT'D: Low Pass Filter, Bass Boost, Input Sensitivity, Illuminated Logo, Thermal, Short and Overload Protection Circuits, Remote Subwoofer Control
- INPUTS/OUTPUTS: RCA & Speaker Level Inputs
- 1 channel x 3,500 watts @ 1 ohm
- 1 channel x 1,750 watts @ 2 ohms
- 1 channel x 875 watts @ 4 ohms
- Operates in mono mode only
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
- Powerful Performance: The AMP1501PRO delivers an impressive 563-watt RMS and a maximum output of 1500 watts, providing a significant power boost for a vibrant and dynamic driving soundtrack.
- Space-Efficient Design: With compact dimensions (7.1" x 7.5" x 2.1"), this amplifier seamlessly integrates into any trunk, optimizing space while delivering high-quality audio performance.
- High-pass and low-pass filters: integrated high- and low-pass filters on the rear panel allow you to set the crossover frequency between the subwoofer and speakers.
- MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists
- Power - 1000 Watts MAX x 1 @1-Ohm, 500 Watts RMS x 1 @1-Ohm, 350 Watts RMS x 1 @2-Ohms,200 Watts RMS x 1 @4-Ohms
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 1 Ohm Stable - Able to continuously power loads of 1 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to be...
- To keep both your car and the stereo amp safe, this ZE500.1 is equipped w/ thermal, overload and short circuit protection. Has been specially designed from the bottom up to provide safe and high quality...
- This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this mono...
- This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties like overheating, making extra sounds. This Class D amplifier is...
- The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is...
- The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control, Remote Bass Knob, MOSFET Power Supply, Thermal Protection, Phase Shift.
- The HD line offers Monoblock amplifiers that operate at 1, 2, or 4 Ohms, making them perfect for a variety of setups, from subwoofers to tweeters.
- The Taramps HD 3000 delivers 3000 Watts RMS. This monoblock amp offers exceptional flexibility and now includes compatibility with Monitor Level Remote.
- The Positive/Negative Power Cable is 4 AWG | The Output Cables Wire Gauge is 9 AWG | The Remote Cable is 18 AWG | The Circuit Breaker or Fuse is 150A.
- Perfect for various car audio setups, this perfect amplifier comes equipped with a Crossover, Input/Output settings and a precise Level Control.
- Marine Class D MOSFET Monoblock Power Amplifier
- Peak Power at 1 Ohm: 1,200 Watts | RMS Power at 1 Ohm: 800 Watts
- Fully Marinized with Waterproof Coating on Circuit Board & Rust Proof Painting on Mechanical Case
- Frequency Response: 20Hz - 250Hz, On-board Bass EQ Switch with +6 or +12dB boost at 45Hz
- Car audio amplifier 450 watts RMS at 2-ohm load (14.4v); 300 watts RMS at 4-ohm load (14.4v);
- Class D - Power loss is significantly reduced making the amplifier highly efficient. Excess energy is stored until it’s needed instead of being converted into heat. Reduction in size/weight, reduced...
- 2-4 Ohm Stable - Able to continuously power loads of 2-4 Ohm without encountering difficulties such as overheating. Typically made to power up subwoofers that demand the heavier power load requirements to...
- Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system
- Power - 2000 Max x 1 @2 Ohms, 1000 Max x 1 @4 Ohms
- Class A/B Topology - Class ‘A’ amplifiers have enormous amount of current flowing through its output transistors with no audio signal. Class ‘B’ amplifiers have no current flowing through its...
- Low & High Level Inputs - A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your...
- Variable Low-Pass Crossover - Subwoofers reproduce sound based on a number of different low-range frequencies. You can set exact sound specifications for the bass frequency reproduction
- 2Ω stable; PWM MOSFET Power supply
- RCA and speaker level inputs
- Variable bass boost 0-12dB; Variable Low-pass filter 50-250Hz; Variable input gain control 0.2-8V
- Full range or LPF mode switch
- Digital Class-D Mono Block Amplifier: Class D topology ensures high efficiency with big power and a small footprint. This single 1-channel amplifier was built for driving subwoofers and subwoofer systems,...
- Compact and Sturdy Design: Precise sound control with our durable metal potentiometer, designed for long-lasting reliability and exceptional tonal adjustments.
- Robust Unregulated Power Supplies: The power supply circuitry adopts advanced pulse width modulator integrated circuits that are designed to offer improved performance and efficiency.
- Remote Bass Controller Included: Provides remote level control of bass from listening position. With a sleek flush-mount knob for ease of installation.
Last update on 2024-12-18 / Images Source Amazon Product API
Article Related to Car Audio Amplifier Monoblock in Tuscaloosa, AL.
What is a Good Single DIN Car Radio?
Over the last decade, the single DIN radio has faded as more vehicles feature or switch to info-centers. These are the touch screen [...]
DSP For Your Car Stereo System
After acquiring my new GMC Denali, I have to admit that I was extremely disappointed and frustrated with the way the factory car [...]
Are Kicker Subwoofers Any Good?
There are several types, sizes, and brands to choose from when looking for an excellent automobile subwoofer. The Kicker is one of the [...]
How Reasonable is AudioControl?
AudioControl has existed for up to 40 years and has been a leading brand in car audio. They were the pioneers of The Epicenter Bass Processor and since then have been looking for new ways to make the bass in mobile environments better.
One of the issues with music production in certain audio equipment was the fact that as the volume increased, the bass disappeared. This was where AudioControl came in, they used their AccuBASS to fix this problem, and now you can listen to music at any level with the bass.
In this article, we will be looking at some of the other products that AudioControl offers and what they do. We would look at some of their features, drawbacks, and benefits.
The Epicenter
This is the product that really brought AudioControl to the limelight. One of the major issues that we encounter when we listen to music through our MP3 player on the car stereo is that the MP3 player thinks the car stereo is a headphone. So, it removes the bass entirely, making for a very terrible listening experience.
Now when you get the products in The Epicenter series, it restores the bass for you, giving you that thumping bass that you crave so much. It is also called the digital bass restoration processor.
AudioControl Surround Sound Processor
This is another major product of AudioControl. This is a newer product that handles surround sounds for you and immerses you into your viewing experience coupled with high-level sound codecs such as DTS:X and Dolby Atmos. This equipment comes in heavy metal steel that has openings all around it to allow for heat to dissipate easily. Also, behind it is the pretty big panel that accommodates every jack you need for connectivity.
One thing that really stands out for this sound processor is the cool AM/FM tuner which you can use to listen to internet radio and network streaming. All you have to do is hook up the ethernet to the rear panel. Another feature of this equipment is that you can control it from your iOS devices just by downloading the slick app. However, one drawback of this system is that you cannot transfer computer audio over USB, but this may not be an issue as these surround systems are usually marketed for your home cinema even though it performs very well with the music.
Market
Generally speaking, AudioControl would be most appreciated by audio engineers, audiophiles, and those who have a big understanding of audio. Their products are usually more for the technical side than for the general public.
Still, they have different lines of products, from the Epicenter series to the Maestro series, which are all about optimizing sound to the hippest possible level.
Conclusion
AudioControl is one the leading brands for car audio with very niche uses. However, one cannot go wrong with buying them. Even though you will definitely need to have a level of technical know-how to use them
Top Searches Related to Car Audio Amplifier Monoblock in Tuscaloosa, AL.
Without a question that when searching for Car Audio Amplifier Monoblock in Tuscaloosa, AL you have many options. Although, car manufactuerer’s like Jeep are making a lot more difficult to upgrade your car stereo you can still have a good sound system in your vehicle, and we are certain that you will be able to find a professional car audio installation store Tuscaloosa, AL that it up to the task. We want to help you in this process be offering you the best deals on car stereo in or near Tuscaloosa, AL. From Car Audio Amplifier 2-Channel to 8-Inch Car Subwoofer Box we got you covered. Many will tell you that music is life and at ThunderEletronics.Net we want to be your go-to when searching for Car Audio Amplifier Monoblock in Tuscaloosa, AL.